• 제목/요약/키워드: Low power technologies

검색결과 434건 처리시간 0.03초

셋톱박스의 에너지 효율 개선에 관한 연구 (Study on Improving Energy-Efficiency of Set-top Box)

  • 이상학;윤정미
    • 정보처리학회논문지D
    • /
    • 제18D권3호
    • /
    • pp.197-204
    • /
    • 2011
  • 방송 신호를 수신하여 TV 등의 디스플레이 장치로 전달하는 셋톱박스는 다른 가전과는 다르게 대기모드, 즉 저전력모드가 존재하지 않는다. 이는 기술적 제약과 운용상의 이유로 인한 것이다. 현재 셋톱박스의 전원을 리모컨으로 끄면 방송을 시청하는 온모드 대비 80~90%의 높은 소비전력을 보인다. 이는 1W 미만으로 동작하는 다른 가전에 비해 월등히 높은 것이다. 국내 및 해외 선진국들은 셋톱박스의 에너지 효율을 높이고자 하는 정책을 시행하고 있다. 본 논문에서는 셋톱박스의 에너지 효율을 개선하고자 저전력 셋톱박스를 설계하고 진행 중인 개발에 대해 기술한다. 저전력 모드를 지원하는 SoC, 전원 모드를 구분하여 동작하도록 하는 시스템 하드웨어 및 소프트웨어, 그리고 방송사와의 연동을 통한 전원관리를 이루는 미들웨어 등이 핵심 개발 내용이다. 그리고 이를 통해 이룰 수 있는 에너지 소비 절감 효과를 보인다.

LoRa 기반 IoT 보안대책에 대한 연구 (A Study on IoT Security Technology using LoRa)

  • 정용식;차재상
    • 문화기술의 융합
    • /
    • 제3권4호
    • /
    • pp.185-189
    • /
    • 2017
  • 사물인터넷(IoT) 기술의 급속한 성장에 따라 우리는 공간의 제약을 받지 않고 사람과 사물, 사물과 사물을 서로 네트워크로 연결하여 정보를 주고받을 수 있게 되었다. 최근에는 이를 효과적으로 구현하기 위한 저전력 광역 통신방식인 LPWA(Low Power Wide Area) 네트워크 기술이 점점 인기를 얻고 있다. 본 논문에서는 LPWA 기술 중 하나인 LoRa 기술에 대해서 알아보고 LoRa를 기반으로 하는 IoT 시스템에서 보안위협을 최소화하기 위한 IoT 보안 기술을 제안한다.

엑시머 레이져를 이용한 극히 얕은 접합과 소스, 드레인의 형성과 50nm 이하의 극미세 n-MOSFET의 제작 (Ultra Shallow Junction wish Source/Drain Fabricated by Excimer Laser Annealing and realized sub-50nm n-MOSFET)

  • 정은식;배지철;이용재
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 하계학술대회 논문집
    • /
    • pp.562-565
    • /
    • 2001
  • In this paper, novel device structures in order to realize ultra fast and ultra small silicon devices are investigated using ultra-high vacuum chemical vapor deposition(UHVCVD) and Excimer Laser Annealing (ELA). Based on these fundamental technologies for the deep sub-micron device, high speed and low power devices can be fabricated. These junction formation technologies based on damage-free process for replacing of low energy ion implantation involve solid phase diffusion and vapor phase diffusion. As a result, ultra shallow junction depths by ELA are analyzed to 10~20nm for arsenic dosage(2${\times}$10$\_$14//$\textrm{cm}^2$), exciter laser source(λ=248nm) is KrF, and sheet resistances are measured to 1k$\Omega$/$\square$ at junction depth of 15nm and realized sub-50nm n-MOSFET.

  • PDF

상변화 메모리 응용을 위한 $Ge_{1}Se_{1}Te_{2}$ 박막의 셀 구조에 따른 전기적 특성 (Electrical characteristic for Phase-change Random Access Memory according to the $Ge_{1}Se_{1}Te_{2}$ thin film of cell structure)

  • 나민석;임동규;김재훈;최혁;정홍배
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 제38회 하계학술대회
    • /
    • pp.1335-1336
    • /
    • 2007
  • Among the emerging non-volatile memory technologies, phase change memories are the most attractive in terms of both performance and scalability perspectives. Phase-change random access memory(PRAM), compare with flash memory technologies, has advantages of high density, low cost, low consumption energy and fast response speed. However, PRAM device has disadvantages of set operation speed and reset operation power consumption. In this paper, we investigated scalability of $Ge_{1}Se_{1}Te_{2}$ chalcogenide material to improve its properties. As a result, reduction of phase change region have improved electrical properties of PRAM device.

  • PDF

비선형 해석법을 이용한 IMT2000 중계기용 1W 전력증폭기 제작 연구 (A Study on the Fabrication of 1W Power Amplifier for IMT2000 Repeater Using Nonlinear Analysis)

  • 전광일
    • 대한전자공학회논문지TE
    • /
    • 제37권2호
    • /
    • pp.83-90
    • /
    • 2000
  • 본 논문에서는 IMT2000 중계기용으로 1.88-1.98 ㎓ 대역 전력증폭기를 저 가격, 소형으로 개발하였다. 이 전력증폭기는 두 단으로 구성되어 있으며 초단은 P-HEMT (ATF-34143, 800 micron gate width, Agilent Technologies)를 사용하였으며, 종단은 GaAs FET(EFA240D-SOT89, 2400 micron gate width, Excelics Semiconductor)를 사용하였다. 개발된 전력 증폭기는 전체 주파수 대역인 1880-1980 ㎒에서 이득이 29.5㏈, 1㏈ gain compression point는 29.5dBm, 3rd order intercept point(OIP3)는 42dBm 그리고 입출력 return loss는 -10㏈/-l2㏈ 이다. 본 연구에서는 이 전력 증폭기를 설계하기 위하여 각 소자의 비선형 모델을 사용하여 전력증폭기의 여러 가지 비선형 특성을 설계할 수 있었으며, 이 전력 증폭기의 크기는 42(L) x 34(W) mm으로 소형화가 가능하였다.

  • PDF

High-Pixel-Density PenTile $Matrix^{TM}$ RGBW Displays for Mobile Applications

  • Credelle, Thomas.L.;Brown Elliott, Candice.H.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
    • /
    • pp.867-872
    • /
    • 2005
  • High-pixel-density displays are now under development to meet the needs of next-generation mobile devices; methods to more efficiently build such displays are described. Displays based on subpixel rendering and RGBW technologies, known as PenTile $Matrix^{TM}$ RGBW, are shown to offer the best approach to meeting the demanding requirements of low manufacturing cost, high brightness, and low power.

  • PDF

Measurement of Noise and Speed in the EMR using Power Line Network

  • Song, Yong-soo;Yoon, Sung-Won;Cho, Young-Bin;Lee, Chung-Keun;Min, Se-Dong;Nam SuK Bang;Lee, Myung-Ho
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2002년도 ICCAS
    • /
    • pp.58-58
    • /
    • 2002
  • Recently Many technologies of the P.L.N (Power Line Network) are introduced for an efficient communication. P.L.N transmits information using power line channel. A medical information transmission system is proposed in this paper for the effective transmission. The Power Line Networks have an advantage in low cost because it uses existent power line. It can be easily applied anywhere that a power line socket is available. But the power line channel is very noisy, because many electronic devices in generate electronic noise in modulated signals. This problem should be considered carefully in the design of medical information transmission system using P.L.N. The proposed system can be applied...I propose a telemedicine system using the power line network.

  • PDF

수용가 전력관리시스템 개발 연구 (A Study on the Development of Industrial Power Management System)

  • 문영환;성기철;윤상현;김언충
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1995년도 하계학술대회 논문집 B
    • /
    • pp.550-552
    • /
    • 1995
  • Real time informations from industrial power system in operation can be used for efficient energy conservation, optimal operation of electrical equipments, and expansion planning of apparatus. Requirements for energy conservation and supplied power quality in customers are increasing significantly because of their effects on the production cost and efficiency. Thus, the development of low cost power management system which can can operate in domestic power system properly is substantially requested. In this research, operation software for real time monitoring and control system in customer power system has been developed to achieve the above purposes. The development of the operating software and related technologies are expected to be applied successfully for reducing electricity cost, enhancing power quality, determining facility expansion planning, operating optimal power system, increasing production efficiency, and reducing maintenance cost.

  • PDF

저전력 장거리 통신기술을 이용한 과학기술 IoT 네트워크 (ScienceLoRa) 개발 (Development of Science IoT Network (ScienceLoRa) using Low Power Wide Area Technologies)

  • 김주범;석우진;곽재승;김기욱
    • KNOM Review
    • /
    • 제22권2호
    • /
    • pp.29-38
    • /
    • 2019
  • 4차 산업혁명의 핵심 기술 중의 하나로서 사물인터넷 (Internet of Things)은 무선 네트워크, 통신모듈 및 센서, 스마트 단말 등의 기술 발전 및 보급 확산으로 그 영향력이 의료, 교통, 제조, 유통, 교육 등의 산업분야를 넘어 과학기술 및 공공분야로까지 확대되고 있다. 특히 과학기술 분야에서도 점차 IoT 기술 연구 및 활용 연구가 증가하고 있으며, 이를 통해 기존의 이론 및 실험 중심의 연구에서 데이터 중심의 연구로의 연구 패러다임이 변환되고 있다. 이와 같이 다양한 데이터를 수집하는 인프라스트럭처 환경 구축의 필요성이 커지고 있으며, 수집된 데이터의 전송·처리·분석을 위한 유·무선 통합 네트워크 환경을 위해 국가과학기술연구망 (KREONET)에서는 저전력 장거리 통신기술 LPWAN (Low Power Wide Area Network) 기반의 국가과학기술무선사물인터넷연구망 (ScienceLoRa) 프로젝트를 시작하였다. ScienceLoRa는 기존의 백본망 위주의 유선망인 KREONET를 활용하여 LoRa/LoRaWAN 기술을 활용한 무선망을 구축함으로써 과학기술 및 공공분야에서 다양한 센서들로부터 데이터를 수집하여 이를 전송, 활용 및 분석에 이용하고자 한다. 본 논문에서는 ScienceLoRa 소개, 현재 진행상황, 활용 및 발전 가능성에 대하여 살펴보기로 한다.

PZT 압전재료를 이용한 외팔보 구조의 에너지 수집기에 관한 연구 (A Study on Energy Harvester with Cantilever Structure Using PZT Piezoelectric Material)

  • 차두열;이수진;장성필
    • 한국전기전자재료학회논문지
    • /
    • 제24권5호
    • /
    • pp.416-421
    • /
    • 2011
  • Nowadays, the increasing demands upon mobile devices such as wireless sensor networks and the recent advent of low power electrical devices such as MEMS make such renewable power sources attractive. A vibration-driven MEMS lead zirconate titanate $Pb(Zr,Ti)O_3$ (PZT) cantilever device is developed for energy harvesting application. This paper presents a piezoelectric based energy harvester which is suitable for power generating from conventional vibration and has in providing energy for low power electron ic devices. The PZT cantilever is used d33 mode to get the electrical power. The PZT cantilever based energy harvester with the dimension of 7 mm${\times}$3 mm${\times}$0.03 mm is fabricated using micromachining technologies. This PZT cantilever has the mechanical resonance frequency with a 900 Hz. With these conditions, we get experimentally the 37 uW output power from this device with the application of 1g acceleration using the 900 Hz vibration. From this study, we show the feasibility of one of energy harvesting candidates using PZT based structure. This PZT energy harvester could be used for various applications such a batteryless micro sensors and micro power generators.