• Journal of Power Electronics
• /
• v.15 no.4
• /
• pp.1131-1138
• /
• 2015

This study presents an input-powered high-efficiency interface circuit for energy harvesting systems, and introduces a zero standby power design to reduce power consumption significantly while removing the external power supply. This interface circuit is composed of two stages. The first stage voltage doubler uses a positive feedback control loop to improve considerably the conversion speed and efficiency, and boost the output voltage. The second stage active diode adopts a common-grid operational amplifier (op-amp) to remove the influence of offset voltage in the traditional comparator, which eliminates leakage current and broadens bandwidth with low power consumption. The system supplies itself with the harvested energy, which enables it to enter the zero standby mode near the zero crossing points of the input current. Thereafter, high system efficiency and stability are achieved, which saves power consumption. The validity and feasibility of this design is verified by the simulation results based on the 65 nm CMOS process. The minimum input voltage is down to 0.3 V, the maximum voltage efficiency is 99.6% with a DC output current of 75.6 μA, the maximum power efficiency is 98.2% with a DC output current of 40.4 μA, and the maximum output power is 60.48 μW. The power loss of the entire interface circuit is only 18.65 μW, among which, the op-amp consumes only 2.65 μW.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.11
• /
• pp.61-68
• /
• 2008

In this paper, we propose a RF front-end developments for vehicle UWB radar systems. UWB systems have a very narrow pulse width that is below 1ns. Therefore, UWB is designed to have broadband quality of low power several GHz and must coexist with the radio communication system. UWB's advantages include high channel capacity and data rate, because precise resolution for multi-path can easily position estimate and Rake receiver. Also, UWB has low interference because it displays broadband quality of low power. Positioning is made possible by short range accuracy, which can reduce the expense of system design. An RF front-end module is designed using the DCR(Direct ConveRsion) method and is composed in RF for vehicles at a low-cost.

• Journal of Advanced Navigation Technology
• /
• v.21 no.6
• /
• pp.620-625
• /
• 2017

Recently, the solar module for charging internet devices is installed in crowded areas to offers services so that people can charge their smartphones or tablets. But this charging module can not be linked with the information related to a bus approach so people are subject to let their belongings such as smartphone, tablet pc at the bus stop while they are still charging it. This paper proposes a system to inform the smart phone when the bus is accessed by using the LPWA technology and BLE technology to resolve such under-failures. This experimental result showed that the power usage of LPWA based bus entry systems is an average of X, confirming that the long period usage of low-power can be possible for low power consumption in this results, enabling information on the bus to be transmitted to smart phones using Advertising mode of BLE.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.4
• /
• pp.69-76
• /
• 2011

In this paper, we present the analytic model to quantify the system capacity with delay Quality of Service (QoS) constraints, and analyze the effect of user-multiplexing on the delay QoS performance in multiuser low-power wireless communication systems. For this purpose, we define the degree of multiplexing as the number of scheduled users to be served in a frame, and investigate the effect of degree of multiplexing (DoM) on the trade-off of throughput and delay QoS constraints. Through this analysis, we characterize the optimal DoM maximizing the energy efficiency in low-power communication environments. Finally, through the simulation results, we verify that our approach with its optimal DoM yields substantial capacity gain.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.6
• /
• pp.793-798
• /
• 2010

In this paper we propose a low-power walking compensation method for biped robot based on consumption energy analysis. Firstly, basic walking motions that can reduce energy consumption of robot movements are implemented based on consumption energy analysis according to robot axes. We define knee bent motion as a basic walking motion. It can improve energy consumption and motion stability by lowering center of gravity of the biped robot. We analyze consumption energy of left and right leg of the robot using motor currents and propose a compensation method of walking motions to reduce unbalance of consumption energy between left leg and right leg. It can also improve energy consumption and walking stability of the robot. The proposed low-power compensation method based on consumption energy analysis is verified by walking experiments of a small biped robot with an embedded system.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.1
• /
• pp.145-151
• /
• 2009

Orthogonal Frequency Division Multiplexing (OFDM) has been focused on as 4th generation communication method for realization of Ubiquitous Network in land mobile communications services, and has been a standard technology of Wireless Local Area Network (WLAN) for a High Date Rate communication. And in maritime data communication using high frequency (HF) band, 32-point FFT OFDM system is recommended by International Telecommunication Union (ITU). Maritime communication should be kept on connecting when maritime accident or the maritime disaster happen. Therefore, main device FFT should be operated with low power consumption. In this paper we propose a low power 32-point FFT algorithm using radix-2 and radix-4 for low power operation. The proposed algorithm was designed using VHSIC hardware description language (VHDL), and it was confirmed that the output value of Spartan-3 field-programmable gate array (FPGA) board corresponded to the output value calculated using Matlab. The proposed 32-point FFT algorithm will be useful as a leading technology in a HF maritime data communication.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.2
• /
• pp.103-111
• /
• 2019

The IoT-driven large-scaled systems consist of connected things with on-chip executable embedded software. These light-weighted embedded things have limited hardware space, especially small size of on-chip flash memory. In addition, on-chip embedded software in flash memory is not easy to update in runtime to equip with latest services in IoT-driven applications. It is becoming important to develop light-weighted IoT devices with various software in the limited on-chip flash memory. The remote instruction execution in cloud via IoT connectivity enables to provide high performance software execution with unlimited software instruction in cloud and low-power streaming of instruction execution in IoT edge devices. In this paper, we propose a Cloud-IoT asymmetric structure for providing high performance instruction execution in cloud, still low power code executable thing in light-weighted IoT edge environment using remote instruction execution. We propose a simulated approach to determine efficient partitioning of software runtime in cloud and IoT edge. We evaluated the instruction cloudification using remote instruction by determining the execution time by the proposed structure. The cloud-connected instruction set simulator is newly introduced to emulate the behavior of the processor. Experimental results of the cloud-IoT connected software execution using remote instruction showed the feasibility of cloudification of on-chip code flash memory. The simulation environment for cloud-connected code execution successfully emulates architectural operations of on-chip flash memory in cloud so that the various software services in IoT can be accelerated and performed in low-power by cloudification of remote instruction execution. The execution time of the program is reduced by 50% and the memory space is reduced by 24% when the cloud-connected code execution is used.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.246-248
• /
• 2021

Recently data has been transformed into a data economy and society that acts as a catalyst for the development of all industries and the creation of new value, and COVID-19 is accelerating digital transformation. In the upcoming intelligent Internet of Things era, the availability of decentralized systems such as blockchain and mixnet is emerging to solve the security problems of centralized systems that makes it difficult to utilize data safely and efficiently. Blockchain manages data in a transparent and decentralized manner and guarantees the reliability and integrity of the data through agreements between participants, but the transparency of the data threatens the privacy of users. On the other hand, mixed net technology for protecting privacy protects privacy in distributed networks, but due to inefficient power consumption efficiency and processing speed issues, low cost, light weight, low power consumption Internet Hard to use. In this paper, we analyze the limitations of conventional mixed-net technology and propose a mixed-net technology method for low power consumption, high speed, and the Internet of things.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.9
• /
• pp.750-758
• /
• 2013

In this paper, we introduce the low-density parity-check (LDPC) coded orthogonal frequency division multiplexing (OFDM) subframe reordering scheme for achieving equal combined power allocation in type I hybrid automatic repeat request (H-ARQ) systems and analyze the performance improvement by using the channel capacity. Also, it is confirmed that the layered decoding for subframe reordering scheme in H-ARQ systems gives faster convergence speed. It is verified from numerical analysis that a subframe reordering pattern having larger channel capacity shows better bit error rate (BER) performance. Therefore the subframe reordering pattern achieving equal combined power allocation for each subframe maximizes the channel capacity and outperforms other subframe reordering patterns. Also, it is shown that the subframe reordering scheme for achieving equal combined power allocation gives better performance than the conventional Chase combining scheme without increasing the decoding complexity.

• Journal of Power Electronics
• /
• v.16 no.6
• /
• pp.2243-2257
• /
• 2016

This paper presents a two stage three-phase proton exchange membrane fuel cell (PEMFC) generation system. When the system is connected to a three-phase load, it is very sensitive to the characteristics and type of the load. Especially unbalanced three-phase loads, which result in a pulsating power that is twice the output frequency at the inverter output, and cause the dc-link to generate low frequency ripples. This penetrates to the fuel cell side through the front-end dc-dc converter, which makes the fuel cell work in an unsafe condition and degrades its lifespan. In this paper, the generation and propagation mechanism of low frequency ripple is analyzed and its impact on fuel cells is presented based on the PEMFC output characteristics model. Then a novel method to evaluate low frequency current ripple control capability is investigated. Moreover, a control scheme with bandpass filter inserted into the current feed-forward path, and ripple duty ratio compensation based on current mode control with notch filter is also proposed to achieve low frequency ripple suppression and dynamic characteristics improvement during load transients. Finally, different control methods are verified and compared by simulation and experimental results.