• Journal of information and communication convergence engineering
• /
• v.9 no.1
• /
• pp.59-63
• /
• 2011

Conventional noise reduction filtering schemes realize limited improvements of the peak signal-to-noise ratio (PSNR) in the low-level noisy images. The flatness degree and the edge information are effectively used to estimate the noise volume. We propose a noise estimator for reducing noise in the AWGN (additive white gaussian noise) corrupted images using three intermediate image maps (FGM(flatness gray map), FIM(flatness index map), NEM(noise estimate map)). The proposed noise estimator is fed into the conventional noise reduction filters as a pre-processor. The performance of noise reduction is tested in the various AWGN corrupted images.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.5
• /
• pp.369-376
• /
• 2013

Using Lowson's acoustic analogy, low frequency noise of a wind turbine (WT) is predicted in time domain and the noise sources contributing to the low frequency noise is analyzed. To compute averaged pressure distribution on blades of the WT as noise source, XFOIL is utilized. The blade source domain is divided into several segments along the span direction to compute force exerted on air surrounding the blade segments, which is used as input for noise prediction. The noise sources are decomposed into three terms of force fluctuation, acceleration and velocity terms and are analyzed to investigate each spectral contribution. Finally, predicted spectra are compared with measured low frequency noise spectrum of a wind turbine in operation. It is found that the force fluctuation component contributes strongly in low frequency range with increasing wind speed.

• ETRI Journal
• /
• v.32 no.6
• /
• pp.837-842
• /
• 2010

This paper proposes robust source localization methods for estimating the azimuth angle, elevation angle, velocity, and range using a low-complexity planar antenna array in impulsive non-Gaussian noise environments. The proposed robust source localization methods for wireless communication applications are based on nonlinear M-estimation provided from Huber and Hampel. Simulation results show the robustness performance of the proposed robust methods in impulsive non-Gaussian noise.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.319-322
• /
• 1998

A 20 GHz 2-stage MMIC (Monolithic Microwave Integrated Circuits) LNA(Low Noise Amplifiers) has been designed. The pHEMT with gate length of 1.15 um has been used to provide ultra low noise and high gain amplification. Series and Shunt feedback circuits were interted to ensured high stability over frequency range of DC to 60 GHz. The size of designed MMIC LNA is 2285um x 2000um(4.57mm2). The simulated noise figure of MMIC LNA is less than 1.7 dB over frequency range of 20 GHz to 21 GHz.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.309-312
• /
• 2002

In this paper, we discuss the design of high gain low noise amplifier by using the 0.2sum CMOS technology. A cascode inverter is adopted to implement the low noise amplifier. The proposed cascode inverter LNA is one stage amplifier with a voltage reference and without choke inductors. The designed 2.4GHz LNA achieves a power gain of 25dB, a noise figure of 2.2dB, and power consumption of 255㎽ at 2.5V power supply.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.354-357
• /
• 2003

The low noise and balanced amlifier has been designed by using PBG. Usually balanced LNAis used to matching the input and output mismatching that caused by matching the low noise matching point. And the PBG supresses the harmoincs. This paper proposed balanced LNA by using PBG. And this configuration improve the performance - noise figure, VSWR.

• Progress in Superconductivity and Cryogenics
• /
• v.15 no.2
• /
• pp.20-23
• /
• 2013

For sensitive measurements of micro-Tesla nuclear magnetic resonance (${\mu}T$-NMR) signal, a low-noise superconducting quantum interference device (SQUID) system is needed. We have fabricated a liquid He dewar for an SQUID having a large diameter for the pickup coil. The initial test of the SQUID system showed much higher low-frequency magnetic noise caused by the thermal magnetic noise of the aluminum plates used for the vapor-cooled thermal shield material. The frequency dependence of the noise spectrum showed that the noise increases with the decrease of frequency. This behavior could be explained from a two-layer model; one generating the thermal noise and the other one shielding the thermal noise by eddy-current shielding. And the eddy-current shielding effect is strongly dependent on the frequency through the skin-depth. To minimize the loop size for the fluctuating thermal noise current, we changed the thermal shield material into insulated thin Cu mesh. The magnetic noise of the SQUID system became flat down to 0.1 Hz with a white noise of 0.3 $fT/{\surd}Hz$, including the other noise contributions such as SQUID electronics and magnetically shielded room, etc, which is acceptable for low-noise ${\mu}T$-NMR experiments.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.380-384
• /
• 2001

The household reftigerator's noise which is closely related with resident environment can hardly be evaluated its sound quality using the Korean Standards. Radiation characteristics of compressor noise consist of tonal noise in low frequency range and, or narrow band noise in high frequency range. In this study, measuring method for detecting the abnormal and low-level noise in high frequency band is presented, and control method for its reduction is proposed. After installing wall which is similar to living condition, we determined a major concerning frequency band of noise. It can be found the directivity of high frequency noise radiated from compressor by using experiment and analysis. According to isolation of noise transfer path, remarkable noise reduction is achieved.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.5
• /
• pp.687-693
• /
• 2000

Recently, a scroll compressor is widely used, because a scroll compressor features low noise, due to less pulsation of gas pressure, than that of the rotary compressor. The major source of noise in air-conditioner is a compressor. Therefore, noise reduction in a compressor is quite significant as an element technology in air-conditioner field. For a reduction of noise, the source of noise must be identified. This paper presents detailed analyzes for the major noise source (fluid-borne noise and structure-borne noise) causes in a scroll compressor, which will make possible a low noise and vibration design of a scroll compressor.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.2
• /
• pp.93-100
• /
• 2008

In this paper, Low Noise Block down converter(LNB) is designed for a Ka-band satellite television receiver only(TVRO) using commercially available MMIC. Designed Low Noise Block down-converter is composed of three stage amplifiers involving input noise matched at first amplification stage, image reject band pass filter, frequency mixer and intermediate frequency amplification. Through LNB Module power budget to obtain gain and attenuation, Optimum LNB devices satisfying Ka-band LNB technical specification are selected. Experimental results of designed Ka-band LNB yields conversion gain of over $58{\pm}1dB$, noise figure of less than 1.5dB and phase noise of -94.6dBc @10KHz.