• 대한임베디드공학회논문지
• /
• 제9권1호
• /
• pp.1-9
• /
• 2014

As Android platform and its applications are widely used, it is necessary to assure the reliability and safety of Android applications. The capture and replay technique is widely used for reproducing the crashes in Java applications. In this paper, we adapt the context-based capture and replay technique to Android applications by considering Android activity structure and its GUI characteristics. Our capture and replay technique uses probe code insertion based on AspectJ for minimizing the original code change and for enhancing the efficiency and reusability of the probe codes. For proving the efficiency of our technique, we provide a case study and execution overhead comparisons with related works, in which our approach has merits in GUI oriented Android applications with relatively low execution overhead.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.188-192
• /
• 2003

A multilayer two-stage LC bandpass filter using low-temperature cofired-ceramic (LTCC) is proposed in this paper. The proposed bandpass filter is composed of two ceramic substrates with different dielectric constant instead of single ceramic material from top to bottom layer. The bandpass filter size is $2.0 mm{\times}1.2 mm{\times}0.8 mm$. Positioning of attenuation polefrequency, importance parameter for a performance of filter, is discussed using even-odd mode analysis by tuned capacitance of coupling capacitor and those results is implemented to LTCC filter circuit. Measured filter performances show that the insertion losses are -4.5dB, -4.1dB at 2.45GHz, 2.75GHz and the return losses are -8.5dB, 8.7dB.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.638-648
• /
• 2003

An active capacitance circuit is analyzed in depth and its application to active RF BPF with low noise figure is discussed. The characteristics of the active capacitance circuit made of FET[1] exhibits negative resistance and conventional capacitance, which is easily controlled. However, it is difficult to make the negative resistance adequate in the designated frequency range due to the lack of detailed analysis, which could make an active circuit unstable as the frequency is going higher or lower. In this paper, we analyzed the negative resistance characteristics of active capacitance circuits and also presented the method that the flatness of passband can be controlled. Finally we have designed a 4-stage active BPE, which results in bandwidth of 100 MHz, 0,04 dB insertion loss, 0.2 dB ripple, and noise figure of 2.4 dB at 1.75 GHz band.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.333-337
• /
• 2003

In this paper, 5.2 GHz WLAN BPF(Band Pass Filter) using LTCC(Low temperature co-firing ceramic) Multilayer technology was simulated and manufactured. A DGS(Defected Ground structure) resonator with spiral ground pattern is used to shorten resonator size and improve circuit Q factor. And the equivalent circuit of BPF was suggested. The measured result shows good agreement with simulated data. Experimental results show the center frequency of 5.25GHz, the insertion loss of 0.14dB, and the 3-dB bandwidth of 350MHz (6%). The center frequency of BPF is 5.25GHz which is available for wireless LAN.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1406-1407
• /
• 2008

In this paper, a micro balanced filter in magnetically coupled LC resonators is proposed, designed, simulated by using FR-4 PCB substrate for low cost, small volume IEEE 802. 11a wireless LAN application. Two pair of coupled LC resonators using magnetic coupling of embedded inductors are applied to obtain bandpass transmission response and improve their phase and magnitude imbalance characteristics. In addition, high dielectric composite film is applied to fabricate the high Q MIM capacitors with small size and high capacitance density. It has an insertion loss of 1.4 dB, a return loss of 10 dB, a phase imbalance of 0.25 degree, and magnitude imbalance of 0.17 dB at frequency bandwidth of 200 MHz ranged from 5.15 GHz to 5.35 GHz, respectively. The proposed balanced filter has a small volume of $1.1mm{\times}1.3mm{\times}0.6mm$ (height).

• 한국군사과학기술학회지
• /
• 제11권3호
• /
• pp.146-153
• /
• 2008

High-power communication jammer has to include the switched filter bank to eliminate the harmonic signals generated by amplifier. Generally, the switched filter bank consists of in-out switches and several filters. This paper describes the design of high-power switched filter bank, particularly the high-power filter bank operating over 20$\sim$110MHz frequency range. The filters designed have insertion loss less than 0.3dB, VSWR less than 1.25:1, and harmonic suppression more than 35dB. Also, the switched filter bank can endure upto 2kW high-power signal with very low harmonic level within $30{\mu}s$ switching speed.

• 전기화학회지
• /
• 제11권1호
• /
• pp.37-41
• /
• 2008

The effects of carbon-coated silicon anode on the electrochemical properties and structural change were investigated. The carbon-coated silicon powders have been prepared by thermal decomposition under argon/10wt% propylene mixed gas flow at $700^{\circ}C$. The surface and crystal structure of the synthesized materials were examined by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Raman spectroscopy. Lithium cells with electrodes made from the uncoated and the carbon coated silicon anode were assembled and tested. The carbon-coated silicon particles merged together well after the insertion/extraction of lithium ions, and showed a relatively low irreversible capacity compared with the uncoated silicon particle.

• Archives of Plastic Surgery
• /
• 제36권4호
• /
• pp.481-484
• /
• 2009

Purpose: Cleidocranial dysostosis is a rare hereditary disorder affecting bones that develop by intramembranous formation. The typical features include excessive growth of transverse diameter of the skull, hypoplastic clavicles, low height and characteristic facial features. Methods: A 28 years old female patient visited by frontal area depression. The diagnosis was performed by computed tomographic study and radiographic imaging. The patient has widely opened anterior fontanelle, partial fused metopic suture, multiple wormian bone and supernumenary impacted teeth. Under the coronal incision, we exposed depressed frontal area and corrected with Medpor block carving. Results: Postoperatively, frontoparietal skull was aestheticlly improved and she was satisfied with the results. Conclusion: Authors report a case of cleiodocranial dysostosis who has been done correction of abnormal skull shape by Medpor$^{(R)}$ insertion.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1417-1420
• /
• 2006

In this paper, floor impact is studied by using 1-D wave model and predicted insertion loss is compared to the measurements done in the mock-up. A mock-up is built by using 6t steel plate, and two identical cabins are made where 25t or 50t panel is used to construct wall and ceiling inside the steel structure. Various floating floor structures are studied, in which mineral wool thickness, height, and stiffness changes are investigated. It is shown that the wave model and measurements are in good agreements in general, although there occur significant discrepancies in the low frequency range below 200 Hz.

• 한국통신학회논문지
• /
• 제29권3A호
• /
• pp.311-317
• /
• 2004

Varactor 다이오드와 branch coupler를 이용한 반사형 아날로그 위상 변위기 설계에 대하여 기술하였다. 1단의 위상 변위기로 위상 변위를 크게 하기 위하여 마이크로 스트립 stub기법을 사용하였으며 2.260GHz 주파수대에서 제작 결과 170$^{\circ}$의 위상이 변화함을 확인하였다. 측정된 삽입손실을 3㏈ 이하이었고. 반사 손실은 12㏈ 이상이었다. 본 논문에서는 설계 기법과 제자 및 실험 결과를 상세히 기술하였다.