• 한국전자통신학회논문지
• /
• 제6권4호
• /
• pp.505-509
• /
• 2011

홈 네트워크 시스템은 조명, 가스, 난방 기기 등 가정 내의 다양한 정보기기들을 네트워크로 연결하여 집안내부에서 제어하고 휴대폰 또는 스마트 폰 그리고 개인용 컴퓨터로 외부에서 제어할 수 있다. 홈 네트워크 시스템을 구성하는 통합 서버와 월 패드는 고가이고 네트워크 인프라를 구축하여야 하는 단점이 있다. 본 논문에서는 이러한 홈 네트워크의 단점을 보완하는 스마트 폰을 이용한 지능형 홈 네트워크 시스템을 제안하였다. 현재 널리 보급된 스마트 폰은 고 사양 입출력 장치로 기존 월 패드의 사용자 인터페이스 부분인 디스플레이와 터치스크린을 대체하고, 홈 네트워크의 관리 및 제어 기능을 스마트 폰에 집중함으로써 저비용으로 보급형 월패드를 구현하였다.

• 한국토양비료학회지
• /
• 제49권6호
• /
• pp.712-719
• /
• 2016

Understanding N mineralization dynamics in soil is essential for efficient nutrient management. An anaerobic incubation experiment was conducted to examine N mineralization potential and N mineralization rate of the organic amendments with different C:N ratio in paddy soil. Inorganic N in the soil sample was measured periodically under three temperature conditions ($20^{\circ}C$, $25^{\circ}C$, $30^{\circ}C$) for 90 days. N mineralization was accelerated as the temperature rises by approximately $10%^{\circ}C^{-1}$ in average. Negative correlation ($R^2=0.707$) was observed between soil inorganic N and C:N ratio, while total organic carbon extract ($R^2=0.947$) and microbial biomass C ($R^2=0.824$) in the soil were positively related to C:N ratio. Single exponential model was applied for quantitative evaluation of N mineralization process. Model parameter for N mineralization rate, k, increased in proportion to temperature. N mineralization potential, $N_p$, was very different depending on C:N ratio of organic input. $N_p$ value decreased as C:N ratio increased, ranged from $74.3mg\;kg^{-1}$ in a low C:N ratio (12.0 in hairy vetch) to $15.1mg\;kg^{-1}$ in a high C:N ratio (78.2 in rice straw). This result indicated that the amount of inorganic N available for crop uptake can be predicted by temperature and C:N ratio of organic amendment. Consequently, it is suggested that the amount of organic fertilizer application in paddy soil would be determined based on temperature observations and C:N ratio, which represent the decomposition characteristics of organic amendments.

• 한국인터넷방송통신학회논문지
• /
• 제17권5호
• /
• pp.173-179
• /
• 2017

축산 선진국에서는 축산 폐기물을 바이오 에너지 및 퇴비, 액비로 자원화 이용하고 있다. 우리나라에서도 축산분뇨를 더 이상 페기물이 아닌 자원화 할 수 있도록 관련 연구가 활발하게 이루어지고 있다. 그러나 좁은 국토면적과 부족한 농지면적으로 가축분뇨 자원의 전량 자원화에는 어려운 상황이다. 특히 지역적으로 과잉되는 양분은 제2의 환경오염을 유발할 수 있어 지역적으로 잉여되는 양분의 관리기법이 매우 시급한 상황이다. 본 논문에서는 지역적으로 발생되는 가축분뇨 중 함유된 양분량을 정확하게 예측하기 위해서 사육단계별로 돼지 두수를 입력하면 자동으로 분뇨발생량 및 함유양분을 계산하도록 하였다. 또한 이를 통해 발생된 분뇨의 농지환원 시 시비량을 100평당 NPK 비료 3요소로 자동 계산토록 하여 시비량을 산출하는 모의실험을 수행하였다.

• 한국해안·해양공학회논문집
• /
• 제24권3호
• /
• pp.166-178
• /
• 2012

서해안에 영향을 미치는 폭풍해일 모의를 위해 비대칭 태풍바람장, 조석 및 파랑의 복합적 현상이 동시에 고려되어 북서태평양까지 확장된 동일한 상세유한요소격자상에서 수행되었다. 비대칭형 태풍 경도풍은 JTWC에서 제공하는 Best track의 4분면 풍속반경 자료 등이 조석유동모형 pADCIRC에 입력되고 파랑모형 unSWAN과 동적 결합되어 병렬클러스터에서 계산된다. 태풍 곤파스(TY1007)에 적용한 모의실험에서 이어도 관측기지의 파랑자료 및 우리나라에 근접한 시간에 관측된 주요 검조소에서의 해수면자료와 매우 잘 일치하는 만족스러운 결과가 도출되었다. 비대칭형 경도풍 고려로 태풍상륙 이남에서 국부적인 해일고 상승이 두드러지게 모의되어 본 연구에서 제안한 방법은 폭풍해일로 인한 해안저지대 및 주요시설물 범람대비 등 연안재해관리에 유용하게 활용될 수 있다.

• 에너지공학
• /
• 제29권1호
• /
• pp.44-51
• /
• 2020

ESS의 중요성은 네트워크 신뢰성 저하 및 재생 가능 에너지원의 확장으로 인한 전력 수요의 안정화로 인해 강조되었다. ESS (Energy Storage System)는 남은 전력을 저장하고 전력 수요를 충족시키기 위해 필요할 때 이를 사용하며 주로 태양 광 및 풍력과 연계하여 ESS 시스템을 구축한다. 본 논문에서는 낮은 일사량에 효과적인 Master-Slave 방법을 이용한 가정용 PV 충전 모듈을 제안한다. 모듈을 설계 한 후 고속 MPPT 알고리즘이 적용되어 PV 모듈의 비선형 출력 특성에서 최대 출력을 생성한다. PV 충전 모듈의 입력에 대한 평균 전력 값은 296.90 W, 출력 전력은 289.60 W로 평균 97.54 %의 전력변환 효율을 보인다.

• 산경연구논집
• /
• 제10권7호
• /
• pp.71-82
• /
• 2019

Purpose - This study aims to identify the priorities of medical service quality improvement by customer satisfaction characteristics and potential customer satisfaction improvement (PCSI) index based on the dualistic quality classification of Kano Model (1984) for Comprehensive Health Screeening Center in General Hospitals and Centers only for Comprehensive Health Screening and suggest a direction for future improvement. Research design, data, and methodology - Through advanced research on health screening medical service quality, this study set four service quality factors, including tangible, human, process and supportive factors, and 39 measurement items. Based on these items, the study used 117 questions, which consist of dualistic quality factors, customer satisfaction coefficients, positive and negative questions for PCSI index and questions for current satisfaction. 300 effective samples were collected for adults in their 20s who experienced health screening service in Seoul, Gyeonggi-do and Incheon within the past two years. Collected data were input in the quality evaluation duality table to categorize quality factors and calculate customer satisfaction coefficients by Timko(1993). The study also analyzed PCSI index in comparison with current satisfaction and identified priorities in quality improvement. Results - It was found that the most urgent factors to improve the quality in both groups were adequate waiting hours and emergency response for complications, which are process factors classified as unitary quality. It is urgently needed to improve the quality as the PCSI index was high in supportive factors (complaint response team) as attractive quality in Comprehensive Health Screening Center in General Hospitals and in process factors (prevention of infection) as unitary quality in Centers only for Comprehensive Health Screening. As the PCSI index was low in space use as a tangible factor, it was found that the current level can be maintained instead of improvement. Conclusions - To improve the health screening medical service quality, it is required to focus on process factors (adequate waiting hours, emergency response for complications, prevention of infection) and supportive factors (complaint response team) among service qualities perceived by users. It is proposed to ensure continuous efforts to manage and reinforce priorities as a direction for future improvement in health screening service.

• 대한인간공학회지
• /
• 제30권5호
• /
• pp.597-603
• /
• 2011

Objective: The objective of this study was to compare one-hand and two-hands lifting activity in terms of biomechanical stress for the range of lifting heights from 10cm above floor level to knuckle height. Background: Even though two-hands lifting activity of manual materials handling tasks are prevalent at the industrial site, many manual materials handling tasks which require the worker to perform one-hand lifting are also very common at the industrial site and forestry and farming. Method: Eight male subjects were asked to perform lifting tasks using both a one-handed as well as a two-handed lifting technique. Trunk muscle electromyographic activity was recorded while the subjects performed the lifting tasks. This information was used as input to an EMG-assisted free-dynamic biomechanical model that predicted spinal loading in three dimensions. Results: It was shown that for the left-hand lifting tasks, the values of moment, lateral shear force, A-P shear force, and compressive force were increased by the average 43%, as the workload was increased twice from 7.5kg to 15.0kg. For the right-hand lifting task, these were increased by the average 34%. For the two-hands lifting tasks, these were increased by the average 25%. The lateral shear forces at L5/S1 of one-hand lifting tasks, notwithstanding the half of the workload of two-hands lifting tasks, were very high in the 300~317% of the one of two-hands lifting tasks. The moments at L5/S1 of one-hand lifting tasks were 126~166% of the one of two-hands lifting tasks. Conclusion: It is concluded that the effect of workload for one-hand lifting is greater than two-hands lifting. It can also be concluded that asymmetrical effect of one-hand lifting is much greater than workload effect. Application: The results of this study can be used to provide guidelines of recommended safe weights for tasks involved in one-hand lifting activity.

• 대한인간공학회지
• /
• 제32권5호
• /
• pp.413-420
• /
• 2013

Objective: The objective of this study was to compare one-hand and two-hands lowering activity in terms of biomechanical stress for the range of lowering heights from knuckle height to 10cm above floor level. Background: Even though two-hands lifting/lowering activity of manual materials handling tasks are prevalent at the industrial site, many manual materials handling tasks which require the worker to perform one-hand lifting/lowering are also very common at the industrial site and forestry and farming. Method: Eight male subjects were asked to perform lowering tasks using both a one-handed as well as a two-handed lowering technique. Trunk muscle electromyographic activity was recorded while the subjects performed the lowering tasks. This information was used as input to an EMG-assisted free-dynamic biomechanical model that predicted spinal loading in three dimensions. Results: It was shown that for the left-hand lowering tasks, the values of moment, lateral shear force, A-P shear force, and compressive force were increased by the average 6%, as the workload was increased twice from 7.5kg to 15kg. For the right-hand lowering task, these were increased by the average 17%. For the two-hands lowering tasks, these were increased by the average 14%. Conclusion: Even though the effect of workload on the biomechanical stress for both one-hand and two-hands lowering tasks is not so significant for the workload less than 15kg, it can be claimed that the biomechanical stress for one-hand lowering is greater than for two-hands lowering tasks. Therefore, it can be concluded that asymmetrical lowering posture would give greater influence on the biomechanical stress than the workload effect for one-hand lowering activity. Application: The result of this study may be used to provide guidelines of recommended safe weights for tasks involved in one-hand lowering activity.

• 한국해안해양공학회지
• /
• 제9권2호
• /
• pp.74-85
• /
• 1997

마산만의 악화된 수질을 개선하고 관리하기 위해서는 정확한 물수지 및 해수교환 특성 분석이 선결되어야한다. 본 연구에서는 모형적용 영역을 4개의 해역으로 분할하여 월별로 물수지를 분석하였으며, 중요한 입력자료인 유역 유출량은 유출계수(=0.7)를 이용하여 추정하였다. 물수지 분석모형을 마산만 및 인근해역에 적용한 결과는 다음과 같다. 마산만 유역의 용수공급에 의한 유출기여율은 1978년 10% 수준에서 점차 증가하여, 현재는 강우에 의한 유출량과 대등한 수준이다. 또한, 하수 차집관거에 의한 유출저감량은 총 유입량의 약 25% 정도이며, 강우 및 증발에 의한 순영향은 10% 정도이다 한편, 마산만의 수리하적 정체시간은 약 3개월(97일)로, 해수교환이 잘 이루어지지 않는다. 해수교환에 의한 염도변화를 분석한 결과 월평균 강우와 염도의 시기적인 상관성은 없고, 염도간 지역적인 상관성만이 있는 것으로 나타났다

• Journal of Information Processing Systems
• /
• 제11권4호
• /
• pp.556-572
• /
• 2015

This paper presents the applications of spatial interpolation and assimilation methods for satellite and ground meteorological data, including temperature, relative humidity, and precipitation in regions of Vietnam. In this work, Universal Kriging is used for spatially interpolating ground data and its interpolated results are assimilated with corresponding satellite data to anticipate better gridded data. The input meteorological data was collected from 98 ground weather stations located all over Vietnam; whereas, the satellite data consists of the MODIS Atmospheric Profiles product (MOD07), the ASTER Global Digital Elevation Map (ASTER DEM), and the Tropical Rainfall Measuring Mission (TRMM) in six years. The outputs are gridded fields of temperature, relative humidity, and precipitation. The empirical results were evaluated by using the Root mean square error (RMSE) and the mean percent error (MPE), which illustrate that Universal Kriging interpolation obtains higher accuracy than other forms of Kriging; whereas, the assimilation for precipitation gradually reduces RMSE and significantly MPE. It also reveals that the accuracy of temperature and humidity when employing assimilation that is not significantly improved because of low MODIS retrieval due to cloud contamination.