• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.57-59
• /
• 2015

A method to measure heating value of natural gas using sound velocity and thermal conductivity is proposed to solve the low heating value issues of imported natural gas in South Korea. Natural gas generally consists of methane, butane, ethane, and inert gases. Heating value changes as the gas material properties, such as density, wobbe index, etc., varies. It is highly important to measure heating values of natural gases accurately because measuring the heating value depends on the given natural gases' components. Therefore, sound velocity and thermal conductivity is measured to estimate indirectly heating value of Natural gas with their changed components.

• Journal of Nutrition and Health
• /
• 제11권3호
• /
• pp.25-30
• /
• 1978

A study was planned to evaluate the influence of continual heating at $150{\pm}5^{\circ}C$ and $170{\pm}5^{\circ}C$ respectively upon edible oils for frying the several food. Two kinds of domestic edible oils (Sample A and B) were collected by random sampling from market and in order to estimate deterioration degrees at both temperatures previously mentioned, thiobarbituric acid (TBA) value, acid value (AV), peroxide value (POV) and carbonyl value (CV) were measured at intervals due to its optical density. Those values were examined and compared according to the temperatures and times, and it was concluded as follows: 1) TBA value was rapidly increased until 24 hours in both temperatures and after 1 day its value have shown a slower increase as compared with initial rapid reaction. 2) Acid value and peroxide value of both oils (A & B) used for frying were increased continuously during heating and the changes in these values were dependent on the thermal oxidation, and moreover at low temperature $(150{\pm}5^{\circ}C)$ these values were found to be increased more readily than at high temperature $(170{\pm}5^{\circ}C)$. 3) Carbonyl value of both sample A and B show almost the same increasing rate at either $150{\pm}5^{\circ}C$ or $170{\pm}5^{\circ}C$ in proportion to the heating time. 4) It was found that there were differences between the chemical changes caused by heating sample A and B at high and low temperature.

• 환경위생공학
• /
• 제10권3호
• /
• pp.29-34
• /
• 1995

This study was on the characteristics and heating values analysis of municipal solid wastes according to the volume- rate garbage collection system in Busan. Each waste sample was analyzed to obtain physical composition, proximate analysis, heating value, chemical composition. And the heating value were compared with those of the past waste collection system. The average physical composition of A.P.T. area was food waste 54.0~65.7% , while that of common residence was food waste 57.9~61.2% . The density of solid waste were largely different for site and the highest densities of waste was $399.6kg/m^{3}$ from Market. The low heating value of waste from residence site was 996.9kca1/kg~1, 238.1 kcal/kg which was lower than 1, 000kcal/kg~1, 800kca1/kg of the past wastes. These difference was mainly due to the difference of moisture content and the amount of vegetables.

• 한국산학기술학회논문지
• /
• 제19권1호
• /
• pp.105-112
• /
• 2018

본 논문은 로이유리(Low emissivity glass) 표면에 증착되어 있는 금속박막의 전도 특성을 이용하여 발열유리(Heatable glass)를 제작하는 방법에 대해 제안한다. 로이유리의 발열량은 로이유리 표면저항에 의한 주울(Joule) 열에 의존하므로 소재의 표면저항을 측정함으로써 예측 및 설계가 가능하다. 본 연구에서는 저방사층이 11nm인 소프트로이유리 시료에 각 50mm 간격으로 은(Ag) 전극을 형성시키고, 4단자법으로 면저항을 측정하여 로이유리의 소비전력과 발열량을 예측한 후에, 제작 및 실험을 통해 발열성능을 확인하였다. 기존의 발열유리 제작방법은 크게 두 가지로 일반유리(Normal glass)에 니크롬(Nichrome) 열선을 삽입하는 방법과, 일반유리에 전도성 투명박막을 증착하는 방법이 있다. 니크롬 열선 삽입 방식은 발열성능은 우수하나 유리 고유의 투명성을 저해하고, 전도성 투명박막을 증착하는 방법은 투명성은 양호하나 공정이 복잡하여 실용성이 저하된다. 본 논문에서는 주로 건축물의 단열효과 향상을 위해 사용되는 로이유리를 이용하여 로이유리 전면에 코팅되어 있는 전도성 금속박막에 레이저 빔을 조사하여 원하는 발열성능을 가지는 발열유리를 제작하는 방법을 제안한다. 제안된 방법은 기존의 니크롬 열선을 삽입하는 방법에 비해 투명성이 양호하고, 전도성 투명박막을 증착하는 방법에 비해 제작과정이 보다 수월함을 확인하였다. 아울러, 레이저를 조사하여 로이유리의 표면 박막을 패터닝(Patterning) 하는 형태에 따른 발열특성의 비교와 로이유리에 적합한 레이저 출력조건을 제시하고자 한다.

• Journal of Ginseng Research
• /
• 제22권3호
• /
• pp.193-199
• /
• 1998

The purpose of this study was to Investigate characteristics of the water soluble browning reaction products (WS-BRPs) from Korean red ginseng by heat treatment. Absorbance of WS- BRPs was increased with increases of heating temperature and time, but pH value were decreased In Muter color value L and b value were decreased, while a value was increased. and absorbance at 280 nm in spectrum of the WS-BRPs was increased according to the increase of heating temperature. When the WS-BRPs were applied on Bio-Gel P-30 column after heating and pH treatment, two majors browning products increased according to the progress on time. And pH 3.0 increased in quantity of high molecular fractions and pH 8.0 increased in quantity of low molecular fractions.

• 한국정보전자통신기술학회논문지
• /
• 제12권3호
• /
• pp.218-223
• /
• 2019

높은 CVD 그래핀저항으로 인한 낮은 발열효과를 해결하기 위해 다층으로 그래핀을 적층하여, 저저항의 광학특성이 우수한 투명 면상 발열시스템을 구현하였다. 제작한 CVD 그래핀의 발열필름으로 $300{\times}400{\times}5mm$ 발열체를 제작하고, 효율적인 전력을 구동하기 위해 PWM 제어를 통한 회로를 구성하여 시스템을 구현하였다. 발열체로 사용한 4층의 CVD 그래핀 필름의 평균 면 저항 측정값은 $85.5{\Omega}/sq$이다. 따라서 저 저항의 CVD 그래핀의 구현 방법으로 열전사의 적층의 방법은 타당하다. 발열시험 결과, CVD 그래핀을 이용한 저저항 투명 면상 발열 시스템의 평균 발열상승은 $10^{\circ}C/min$ 이고, 86.44%의 CVD 그래핀 필름의 광투과율을 갖음을 보여준다. 따라서 제시한 발열 시스템은 대형창 유리 및 자동차 발열유리로서 적용가능하다.

• 한국식생활문화학회지
• /
• 제23권1호
• /
• pp.26-32
• /
• 2008

: In this experiment, three samples of oils were used. These oils were hydrated soybean oil, pure soybean oil and regular soybean oil. Oil was used after heating at $235-240^{\circ}C$ every four hours term and total heating hours was 16 hours. The physio-chemical analysis and sensory evaluation were performed on these oils. The hydrated soybean oil showed lower acid, peroxide and carbonyl value than the other two oils (p<0.05 or p<0.001). The other two oils were more affected in rancidity than the hydrated soybean oil. In color test, whereas L value lowed during the heating time, a and b value increased during the heating time. The tendency of high L value and low b value in a long-time heating was more apparant on the pure soybean oil and the regular soybean oil than on the hydrated soybean oil (p<0.05). In sensory evaluation, color and rancidity order increased during the heating time. The hydrated soybean oil showed color and rancidity order than the other two oils. In overall quality test, the pure and regular soybean oil that had been used for 12 and 16 hour were not preferable. The hydrated soybean oil that had been used for 16 hour were not preferable. In sensory evaluation, the hydrated soybean oil, the pure and regular soybean oil did not show a apparent difference, although the hydrated soybean oil had a little better scores on the overall quality.

• 한국가스학회지
• /
• 제19권1호
• /
• pp.1-5
• /
• 2015

가스엔진구동 히트펌프(GHP : Gas Engine Driven Heat Pump)의 연료인 천연가스의 열량이 감소함에 따라 국내에서 생산되는 GHP에 미치는 영향을 평가하였다. 저열량가스($9,800kcal/Nm^3$)를 연료로 사용하여 엔진 단체 실험 및 GHP 현장평가를 실시한 결과 약간의 출력감소가 확인되었으나 시동성, 운전안정성, 배출가스 특성 등은 거의 변화가 없음을 확인하였다. 따라서 천연가스 열량이 $9,800kcal/Nm^3$까지 감소하여도 별도의 조정없이 GHP가 정상운전될 수 있을 것으로 판단된다.

• 동력기계공학회지
• /
• 제21권5호
• /
• pp.55-62
• /
• 2017

In this study, the water content and the low calorific value of the dried sludge are analyzed by using a vertical cylinder type indirect heating type dryer for evaluatation of energy source value. The vertical cylindrical thin film dryer was an Okadora Pilot Plant, and the dryer was indirect heating vertical thin film type. The internal standard consisted of 500 mm in diameter and 700 mm in height. In the drying experiment, 10 kg of dehydrated sewage sludge was added to the dryer and the total amount of the sludge was adjusted to 27 times by variable of the time, the number of revolutions and the steam temperature. The results of analysis of the 27th experiment component of the dried product showed that the average low calorific value of about 11.2 MJ/kg and the water content of 6%. This is satisfy the fuel use standard of the thermal power plant of the sludge.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제16권3호
• /
• pp.77-82
• /
• 2008

For heat pumps used in a cold region, it is very important to obtain appropriate heating capacity. Several studies using a variable speed compressor and an additional heater have been performed to enhance heating capacity at low ambient temperatures. However, for outdoor temperature conditions below $-15^{\circ}C$, it is still difficult to obtain enough heating capacity above the rated value. In recent studies, the application of gas injection technique into a two-stage heat pump yielded noticeable heating performance improvement at low temperature conditions. In this study, the heating performance of a two-stage gas injection heat pump with a rated capacity of 3.5 kW was measured and analyzed by varying refrigerant charge amount and EEV opening at the standard heating condition. The heating performance of the two-stage gas injection heat pump was compared with that of a two-stage non-injection heat pump. The heating capacity and COP of the two-stage gas injection heat pump were improved by 2-10% at the optimal charging condition over those of the two-stage non-injection heat pump.