• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.305-310
• /
• 2004

The Hot Embossing Lithography(HEL) as a method for the fabrication of nanostructure with polymer is becoming increasingly important because of its simple process, low cost, high replication fidelity and relatively high throughput. In this study, we investigated the characteristics of hot embossing lithography as a nanoreplication technique. To grasp characteristics of nano patterning rheology by process parameters(embossing temperature, pressure and time), we have carried out various experiments by using the DVD(400nm pattern width) and Blu-ray nickel stamps(150nm pattern width). During the hot embossing process, we have observed the characteristics of the size effect. The quality of products made by hot embossing is affected by its cooling shrinkage. The demolding process at the glass transition temperature results in low quality because of the shrinkage of the polymer. Therefore, the quantification of the temperature condition is essential for the replication of high quality.

• 한국군사과학기술학회지
• /
• 제6권3호
• /
• pp.74-85
• /
• 2003

NENA(nitratoethyl nitramine) compounds, especially BuNENA(N-butyl-N-(2-nitratoethyl)-nitramine), are of high interest to both rocket propulsion and military high explosives because of low sensitivity to many forms of stimuli, although they are less energetic than conventional nitrate ester plasticizers. One of advantages in using NENAs is that they provide higher impulse at any given flame temperature than conventional propellants do. BuNENA has better thermochemical characteristics(low melting point and low glass transition temperature), therefore has less tendency to crystallize out of matrices. BuNENA was successfully synthesized in a high yield by reaction of n-butyl aminoethanol and 98% nitric acid followed by dehydrogenation of salt mixture by $Ac_2$/$ZnCl_2$.

• 한국안전학회지
• /
• 제18권2호
• /
• pp.79-85
• /
• 2003

In this study, the behavior characteristics of specimen strengthened with CFRP plate were analyzed according to the change of temperature. CFRP plate itself has a good resistance at the high temperature, but epoxy used as a adhesive is lost its bonding strength at the relatively low temperature. Therefore, this study carries out experiment on the beams slot-bonded with CFRP plates in order to maintain the successful bonding strength of epoxy at high temperature. It is presented that the range of glass transition temperature is 60-8$0^{\circ}C$ and RC beams slot-bonded with CFRP plate shows more increasing resistance and failure load than that of interface bonded at the high temperature.

• 한국세라믹학회지
• /
• 제52권4호
• /
• pp.229-233
• /
• 2015

Currently, the majority of commercial white LEDs are phosphor converted LEDs made of a blue-emitting chip and YAG yellow phosphor dispersed in organic silicone. However, silicone in high-power devices results in long-term performance problems such as reacting with water, color transition, and shrinkage by heat. Additionally, yellow phosphor is not applicable to warm white LEDs that require a low CCT and high CRI. To solve these problems, mixing of green phosphor, red phosphor and glass, which are stable in high temperatures, is common a production method for high-power warm white LEDs. In this study, we fabricated conversion lenses with LUAG green phosphor, SCASN red phosphor and low-softening point glass for high-power warm white LEDs. Conversion lenses can be well controlled through the phosphor content and heat treatment temperature. Therefore, when the green phosphor content was increased, the CRI and luminance efficiency gradually intensified. Moreover, using high heat treatment temperatures, the fabricated conversion lenses had a high CRI and low luminance efficiency. Thus, the fabricated conversion lenses with green and red phosphor below 90 wt% and 10 wt% with a sintering temperature of $500^{\circ}C$ had the best optical properties. The measured values for the CCT, CRI and luminance efficiency were 3200 K, 80, and 85 lm/w.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.123-124
• /
• 2006

Ionic liquids (ILs) are collecting keen interests as an advanced substituent of electrolyte solution as well as novel solvents. In the present talk, I will introduce some strategies to fix IL structure on polymer chains to prepare polar polymers with low glass transition temperature. Namely, cationic, anionic, and zwitterionic monomers have been prepared, and they have been homopolymerized or copolymerized to prepare polymer electrolytes with different properties. The polymers themselves showed very poor ionic conductivity, but it was improved by suitable spacer between charged site and main chain. Other unique characteristics of functional ILs and new polymerized ionic liquids will also be mentioned.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.896-899
• /
• 2002

Microcellular foaming Process has several merits, impact strength elevation, thermal insulation, noise insulation, and raw material saving etc. This method make the glass transition temperature of polymers low, and diminish the residual stress of polymers. This characteristics of Microcellular foaming process influences the physical properties of recycled polymers. This paper describes about the impact strength change of Microcellular foamed recycled ABS.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권6호
• /
• pp.938-946
• /
• 2008

Fe-base amorphous alloy and two crystalline phases composite were fabricated. The effect of temperature and strain rate on mechanical properties was evaluated utilizing compression test. Mixture of non-crystalline and crystalline phases were found using X-ray diffraction (XRD) and differential thermal analysis (DTA) tests. Based on glass transition temperature and crystallization temperature. compression tests were performed in the temperature ranging from $560^{\circ}C$ to $700^{\circ}C$ with $20^{\circ}C$ interval. Relationship between microstructure, including fracture surface morphology, and mechanical behavior was studied. The peak stress of Fe-base amorphous alloy was over 2GPa and expected to have a good wear resistance, but it is expected hard to deform because of low ductility. The peak stress and elongation of two crystalline phases composite was over 1GPa and about 20%, therefore it is possible to deform high strength wear resistant materials such as engine valve.

• 대한화학회지
• /
• 제20권5호
• /
• pp.340-350
• /
• 1976

글라스(glass) 전이온도 이하에서 고체 중합체들의 역학적 분광학의 여러 현상들을 이론적으로 기술하는 데 적용된 線形 반응 이론을 제안하였다. 시료에 의한 에너지 분산을 어떤 시간 相關函數들로 나타내었다. Liouville 연산자를 Kirkwood의 확산식 연산자로 대치하면, 여기에서 시간은 결과로부터 다리결합을 한 중합체들의 에너지 상실과 완화에 대한 Kirkwood의 결과가 나옴을 보였다. 완화시간을 계산하는 방법을 보이기 위하여 상관함수들을 계산하는 근사법을 고찰하였다. 여기에서 제안한 이론과 저온에서 매달린 (pendant) 시클로헥실기들을 가진 고체 중합체들의 역학적 에너지 완화 현상을 기술하는 데 사용된 한 모형 이론과의 관련성을 찾아 보기 위해, 이 근사법을 써서 二重우물 퍼텐셜 모형을 고찰하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.602-605
• /
• 1999

We dried emitting layer of EL device at 30, 80, I20 and $150^{\circ}C$ for Ihr to investigate the effects to the emission characteristics of devices. PL intensity of P3HT thin film decreased with increasing the drying temperature. But, the EL intensity and stability of device with emitting layer dried at $150^{\circ}C$ were the best. We think it s because of absence of water and remaining solvent in P3HT emitting layer. So, We suggest that the drying temperature of emitting layer of EL device should be select slightly low temperature than its glass transition temperature.

• Elastomers and Composites
• /
• 제56권4호
• /
• pp.209-216
• /
• 2021

In this study, we observed the mechanical properties, thermal stability, and low temperature sealing performance of fluorosilicone elastic composites. When the blend ratio of Phenyl vinyl methyl silicone (PVMQ) was increased, the tensile strength, modulus at 100%, and compression set were decreased. The thermal stability of fluorosilicone elastic composites showed a similar tendency. These were caused by poorer green strength of PVMQ than Fluorosilicone rubber (FVMQ). The change in the tensile strength and elongation at -40℃ showed a decreasing tendency with increasing PVMQ blend ratio. By increasing the PVMQ blend ratio, low-temperature performance was improved. The Dynamic mechanical analysis (DMA) results showed that T_g was decreased and low-temperature performance was improved with increasing PVMQ blend ratio. However tanδ was decreased becaused of the poor green strength and elasticity of PVMQ. From a hysteresis loss at -40℃, the hysteresis loss value was increased and fluorosilicone elastic composites showed the decreasing tendency of elasticity with increasing PVMQ blend ratio. From the TR test, TR10 was decreased with increasing PVMQ blend ratio. FS-4 (45% PVMQ blended composites) showed a TR10 of -68.0℃ that was 5℃ lower than that of FS-1 (100% FVMQ). The gas leakage temperature was decreased with increasing PVMQ blend ratio. The gas leakage temperature of FS-4 was -69.2℃ that was 5℃ lower than that of FS-1. Caused by the polymer chain started to transfer from a glassy state to a rubbery state and had a mobility of chain under T_g, the gas leakage temperature showed a lower value than T_g. The sealing performance at low temperature was dominated by T_g that directly affected the mobility of the polymer chain.