• Journal of Korean Academy of Nursing
• /
• v.45 no.2
• /
• pp.293-305
• /
• 2015

Purpose: The aim of the study was to assess and identify gender differences in factors associated with prevalence, awareness, and treatment of osteoporosis. Methods: Data for 3,071 men and 3,635 women ($age{\qeq}50$) from the Korea National Health and Nutrition Examination Survey 2008~2011 were included. Osteoporosis was defined by World Health Organization T-score criteria. Impact factors and odds ratios were analysed by gender using multivariate logistic regression. Results: Osteoporosis prevalence rates were 7.0% in men and 40.1% in women. Osteopenia rates were 45.5% and 46.0% respectively. Among respondents with osteoporosis, 7.6% men and 37.8% women were aware of their diagnosis. Also 5.7% men with osteoporosis and 22.8% women were treated. Higher prevalence was found among respondents who were older, at lower socioeconomic levels, with lower body mass index and shorter height in both genders, and among women with fracture history, and non-hormonal replacement therapy. Awareness and treatment rates for the risk groups were similar compared to the low risk controls for both genders. Fracture history increased awareness and treatment rates independently for both genders. Women with perceived poor health status and health screening had increased awareness and treatment rates, but not men. Conclusion: Results indicate that postmenopausal women have a higher prevalence of osteoporosis than men and awareness and treatment rates were higher than for men. Despite gender difference in prevalence, osteoporosis was underdiagnosed and undertreated for both genders. Specialized public education and routine health screenings according to gender could be effective strategies to increase osteoporosis awareness and treatment.

• Journal of Animal Environmental Science
• /
• v.6 no.3
• /
• pp.141-151
• /
• 2000

Over-grown seaweeds in Donghae(east sea of Korea peninsula) may impedes ocean environment, however, they can be a good nutrient resources for poultry feeds if they are utilized properly. In this study, seaweeds powder were tested for laying hens\` ration to investigate the effects on egg production rate, egg quality and calcium phosphorus excretion. One hundred 65wks-old brown layers were fed for 5 weeks alotted with seaweeds powder addition to experimental diet by 0(control), 0.5, 1.0 and 2.0%, respectively, and obtained following results; 1. Seaweeds proved a mid-protein low-energy feed resources with planty of K, Na, Ca, Mg, Sr and Fe. 2. Seaweeds addition by 0.5% and 1.0% improved egg production rate and egg-mass output markedly(p<0.05) than control. Seaweeds addition did not alter cholesterol level of yolk and yolk index, however egg shell thickness showed increasing trend by increasing seaweeds addition level. 3. Protein absorption and digestibility in seaweed addition treatments were significantly higher(p<0.05) than control group and protein contents of excreta in 0.5% and 1.0% treatments were reduced(p<0.05), which suggests effective protein metabolism for egg production. Increasing seaweeds addition reduces Ca and P contents in rectum and excreta, suggesting Ca and P utilization improvement in laying hens and lessening soil pollution. 4. In conclusion, seaweeds addition in layers' diet by 1.0% level improves egg-mass production and might be egg quality by increasing metabolism of protein, calcium and phosphorus.

• Journal of Environmental Health Sciences
• /
• v.20 no.3
• /
• pp.1-12
• /
• 1994

Wastewaters being treated and final effluents were collected from 3 wastewater treatment plants of petrochemical industries, from August 31 to October 4, 1993 in an interval of 10 days, and further analysed by GC/FID to investigate discharge situation and removal efficiency on polycyclic aromatic hydrocarbons. The results were as follows: 1. The PAHs 294.57 $\mu$g/l were discharged in primary treatment effluent of plant A to manufacture vinyl acetate resin and acryl, and removed 54.51% by aeration and totally 84.71%. 2. The PAHs of the highest concentration were discharged in primary treatment effluent of plant B to manufacture PS resin and ABS resin, but removed 91.65% by activated sludge process and 98.19% by activated carbon to discharge PAHs of the lowest concentration comparing to another treatment operations. 3. The PAHs 99.96 $\mu$g/l of the lowest concentration were discharged in wastewater of plant C to manufacture epoxy resin, and removed 80.48% by activated sludge process. 4. B treatment system including activated carbon showed up the best removal efficiency of PAHs. Activated carbon therefore, seems to be effective as tertiary treatment. 5. Correlation coefficient of components to total PAHs was generally low, and correlation coefficients of phenanthrene, pyrene and acenaphthylene to total PAHs were each 0.98, 0.97 and 0.80, respectively. Correlation coefficient of the sum of phenanthrene, pyrene and acenaphthylene to total PAHs was 0.99, so that the sum of phenanthrene, pyrene and acenaphthylene was available as index to estimated total PAHs. 6. Phenanthrene and Chrysene were very well treated biologically and acenaphthylene and fluoranthene were untreated biologically. 7. Considering EPA standards, it seems that the concentration of phenanthrene, pyrene, fluoranthene, and benzo(k)fluoranthene is high level.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.11
• /
• pp.1221-1229
• /
• 2014

This paper proposes an approach for predicting the fatigue life of a propeller shaft of a forklift truck by an accelerated life test method. The accelerated life test method adopted in this study is the calibrated accelerated life test, which is highly effective in the prediction of the lifetime and enables significant reduction of the test time as well as a quantification of reliability in the case of small sample sizes. First, the fatigue test was performed under two high stress levels, and then, it was performed by setting low stress levels in consideration of the available test time and extrapolation. Major reliability parameters such as the lifetime, accelerated power index, and shape parameter were obtained experimentally, and the experimentally predicted lifetime of the propeller shaft was verified through comparison with results of an analysis of load spectrum data under actual operating conditions.

• Applied Chemistry for Engineering
• /
• v.24 no.2
• /
• pp.208-213
• /
• 2013

In this study, the effect of phosphorus flame retardants on the flame retardancy of the flexible polyurethane foam (PUF) was investigated. Tetramethylene bis(orthophosphorylurea) [TBPU] and phosphinyl alkylphosphate ester [CR-530], resorcinol bis diphenylphosphate [RDP], triethyl phosphate [TEP] were used as flame retardants. The results of thermogravimetric analysis (TGA) indicate that TBPU added PUF produces more charred residues than the other flame retardant added PUF. It was found that TBPU added PUF exhibits low mean heat release rate (HRR), peak HRR, effective heat of combusion (EHC), mass loss rate (MLR), CO yield and $CO_2$ compared to those other flame retardants.

• Radiation Oncology Journal
• /
• v.36 no.1
• /
• pp.63-70
• /
• 2018

Purpose: The objective of this study was to compare dosimetric characteristics of three-dimensional conformal radiotherapy (3D-CRT) and two types of intensity-modulated radiotherapy (IMRT) which are step-and-shoot intensity modulated radiotherapy (s-IMRT) and modulated arc therapy (mARC) for thoracic esophageal cancer and analyze whether IMRT could reduce organ-at-risk (OAR) dose. Materials and Methods: We performed 3D-CRT, s-IMRT, and mARC planning for ten patients with thoracic esophageal cancer. The dose-volume histogram for each plan was extracted and the mean dose and clinically significant parameters were analyzed. Results: Analysis of target coverage showed that the conformity index (CI) and conformation number (CN) in mARC were superior to the other two plans (CI, p = 0.050; CN, p = 0.042). For the comparison of OAR, lung V5 was lowest in s-IMRT, followed by 3D-CRT, and mARC (p = 0.033). s-IMRT and mARC had lower values than 3D-CRT for heart $V_{30}$ (p = 0.039), $V_{40}$ (p = 0.040), and $V_{50}$ (p = 0.032). Conclusion: Effective conservation of the lung and heart in thoracic esophageal cancer could be expected when using s-IMRT. The mARC was lower in lung $V_{10}$, $V_{20}$, and $V_{30}$ than in 3D-CRT, but could not be proven superior in lung $V_5$. In conclusion, low-dose exposure to the lung and heart were expected to be lower in s-IMRT, reducing complications such as radiation pneumonitis or heart-related toxicities.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.603-606
• /
• 2006

We present a study on the development of a practical and quantitative technique for the assessment of the structural health condition with using piezoceramic(PZT) sensors. The electro-impedance-based technique with the PZT patches is very sensitive for evaluation of the incipient and small damage in a high frequency range, and however the commonly traditional modal analysis method is effective only for considerably larger damages in low frequency range. The paper presents the technique in detecting and characterizing real-time damage on the specimen that is an aluminum plate fastened with bolts and nuts by different torques and as well a plate with a crack. By using the special arrangement of the PZT sensors, the required longitudinal wave is generated through the specimen. A large number of experiments are conducted and the different conditions of the specimens, i.e. the location and extent of loosening bolts, and the plate with a crack are simulated. respectively. Since fixing and loosening the loosened bolt is controlled by a torque wrench, we can control exactly the experiment of the different torques. Compared with the simulated healthy condition, we can find whether or not there is a damage in the specimen with using an impedance analyzer with the PZT sensors. Several indices are discussed and used for assessing the different simulated damages. As for the location of bolt loosening, the RMSD is found to be the most appropriate index for numerical assessment and as well the RMSD shows strongly linear relationship for assessing the extent of the bolt loosening, and the frequency peak shift ${\Delta}F$ is used to assess the cracked plate. The possibility of repeatability of the pristine condition signatures is also presented and the appropriate frequency range and interval are uniquely selected through large numbers of experiments.

• Archives of Plastic Surgery
• /
• v.38 no.6
• /
• pp.740-746
• /
• 2011

Purpose: In the treatment of the unilateral cleft lip nasal deformities, the correction of the low-nostril height and short-columella are very difficult problems. We report the treatment outcomes of web uni-limb Z-plasty used for correction of unilateral cleft lip nasal deformities by using photographic analysis. Methods: A total of 36 patients with unilateral cleft lip nasal deformities were enrolled in this study, who underwent web uni-limb Z-plasty and were followed up for at least 6 months. First, a triangular flap was made on the medial side of alar-columella web. The nostril apex of cleft side was corrected to a higher point compared to noncleft side by 2 mm. The flap was transposed into the defect of the vestibule. To reduce the bulging of the flap, horizontal cinching sutures were added. Postoperative outcomes were evaluated by using photographic analysis. 2 indices and 1 angle were measured on their photographs taken before and after the surgery. Symmetry was also evaluated by means of the noncleft side to cleft side index. For anthropologic assessment, observers described postoperative outcomes, using Ordinary Scale Method. Results: The postoperative values obtained in photographic analysis improved compared to preoperative ones. More improving anthropologic assessment was shown in post-than pre-operative. Conclusion: Although, further long term follow up is needed, we found this technique to be an effective procedure to the symmetry of nostril apex level and the lengthening of columella in the unilateral cleft lip nasal deformities.

• Korean Journal of Remote Sensing
• /
• v.29 no.6
• /
• pp.595-600
• /
• 2013

In order to spatially interpolate the near-surface temperature (Ta) values, satellite and reanalysis methods were used from previous studies. Accuracy of reanalysis Ta was generally better than that of satellite-based Ta, but spatial resolution of reanalysis Ta was large to use at local scale studies. Our purpose is to evaluate accuracy of reanalysis Ta and satellite-based Ta according to elevation from April 2011 to March 2012 in Northeast Asia that includes various topographic features. In this study, we used reanalysis data that is ERA-Interim produced by European Centre for Medium-Range Weather Forecasts (ECMWF), and estimated satellite-based Ta using Digital Elevation Meter (DEM), Normalized Difference Vegetation Index (NDVI), difference between brightness temperature of $11{\mu}m$ and $12{\mu}m$, and Land Surface Temperature (LST) data. The DEM data was used as auxiliary data, and observed Ta at 470 meteorological stations was used in order to evaluate accuracy. We confirmed that the accuracy of satellite-based Ta was less accurate than that of ERA-Interim Ta for total data. Results of analyzing according to elevation that was divided nine cases, ERA-Interim Ta showed higher accurate than satellite-based Ta at the low elevation (less than 500 m). However, satellite-based Ta was more accurate than ERA-Interim Ta at the higher elevation from 500 to 3500 m. Also, the width of the upper and lower quartile appeared largely from 2500 to 3500 m. It is clear from these results that ERA-Interim Ta do not consider elevation because of large spatial resolution. Therefore, satellite-based Ta was more effective than ERA-Interim Ta in the regions that is range from 500 m to 3500 m, and satellite-based Ta was recommended at a region of above 2500 m.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.5
• /
• pp.861-870
• /
• 2012

Objectives : This study has made a comparison of the difference between the periodontal parameter before and after applying dental hygiene process on patients requiring supportive periodontal therapy at a private dental clinic. Methods : The entire process was conducted on 74 patients. As a result of analyzing the difference in periodontal parameters such as PPD>4mm, BOP, and O'Leary Index of 29 patients that has completed 1 circle of dental hygiene process. Results : All periodontal parameters in all subject patients had been significantly reduced(p<0.05). Furthermore, as a result of comparing the periodontal conditions of the smoking group and non-smoking group, complier and non-complier, all parameters were reduced with a significant difference in the non-smoking group and the complier, but the smoking group and the non-complier did not show difference in all parameters. As a result of making an assessment of before and after dental hygiene process according to PRA classifications, high risk group has been generally changed to moderate or low risk group. Conclusions : Accordingly, the supportive periodontal therapy applying dental hygiene process has been shown to be effective. The dental hygiene process in periodontal patients who require continuous management is anticipated to be a very efficient process.