• The Journal of the Acoustical Society of Korea
• /
• 제15권3E호
• /
• pp.13-18
• /
• 1996

A real-time identifier for the nonstationary time-varying signals and systems was implemented using a low cost DSP (digital signal processing) chip. The identifier is comprised of I/O units, a central processing unit, a control unit and its supporting software. In order t estimate the system accurately and to reduce quantization error during arithmetic operation, the firmware was programmed with 64-bit extended precision arithmetic. The performance of the identifier was verified by comparing with the simulation results. The implemented real-time identifier has negligible quantization errors and its real-time processing capability crresponds to 0.6kHz for the nonstationary AR (autoregressive) model with n=4 and m=1.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.404-411
• /
• 2004

With distribution industrial control system, the use of low cost to achieve a highly reliable and safe system in real time distributed embedded application is proposed. This developed intelligent node is based on two microcontrollers, one for the execution of the application code, also as master controller for ensuring the real time control & the logic operation with CPLD and other for communication task and the easy control execution, i.e., I/O digital input, digital output and interrupting. This paper also presents where the case NCS (Networked control system) with LonTalk protocol is applied for the filtration process control system of a small water treatment plant.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.393-396
• /
• 2001

This paper presents the sensorless control technique with cost competitive phase currents detection for PMSM drives. The phase currents are detected by two methods : one is from the do link current, another is from the currents of the lower legs of the inverter switches. The sensorless control with the phase currents dectection is implemented with DSP. It is verified through the experiment that the estimated rotor position tracks the real rotor position at the low speeds and high speeds operation with flux weakening.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.137-139
• /
• 2001

This paper describes a new methods of detecting rotor position in SRM(switched reluctance motor). The Conventional method of position sensorless control for SRM is measuring phase current and pulse voltage applied in unexcited phase. The estimation of rotor position based on the detection of inductance by pulse current. Implementation is via low-cost electronic circuits with DSP320F241. Test results show that this technique is a possible approach to detect the rotor position of an SRM.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.334-336
• /
• 2005

This paper proposes a simple MPPT control scheme of a Current- Control-Loop Error system Based that can be obtains a lot of advantage to compare with another digital control method, P&O and IncCond algorithm, that is applied mostly a PV system. An existent method is needed an expensive processor such as DSP that calculated to change the measure power of a using current and voltage sensor at the once. But, a proposed method is easy to solve the cost reduction and power unbalance problems that it is used by control scheme to limit error of a current control of common sensor. This proposed algorithm had verified through a simulation and an experiment on battery charger using PIC that is the microprocessor of a low price.

• 전력전자학회논문지
• /
• 제8권3호
• /
• pp.239-246
• /
• 2003

BLDC 전동기는 높은 효율과 출력밀도로 인하여, 현재 산업응용 분야에 널리 적용되고 있으며, 특히 고성능 제어 특성과 저소음 운전특성으로 인하여 가정용 전자제품의 활용도가 높아지고 있다. 본 논문에서는 제한적인 설계조건에서 요구성능을 만족하는 트레드 밀 구동용 BLDC 전동기를 설계하고, 이에 적합한 제어기를 제작하였다. 전동기설계에서 제한된 고정자 구조에 대하여, 제작의 용이성과 경제성을 고려하여 CAD와 FEM 해석을 통하여 영구자석의 형상을 설계하였다. 설계된 제어기는 트레드 밀의 안정된 구동과 성능을 위하여 운전자의 무게와 회전속도에 따라 학습된 제어기의 이득이 사용되도록 제작되었다. 제시된 트레드 밀 구동용 BLDCM과 제어기는 실험을 통하여 성능을 확인하였다.

• 한국정보통신학회논문지
• /
• 제14권8호
• /
• pp.1776-1782
• /
• 2010

간섭형 Fiber optic gyroscope(FOG)는 Sagnac 효과를 이용한 회전센서로 알려져 있으며, 성능 개선을 위한 연구가 수행되어 왔다. 본 논문은 개루프 방식의 FOG 개발과 FPGA를 이용한 디지털 신호처리 기술을 다루고 있다. 첫 번째 목표는 양호한 bias stability(0.22deg/h), Scale factor stability, 단일모드 광섬유를 이용한 낮은 Angle randomwalk(0.07deg/$\sqrt[]{h}$)와 저가의 중급 자이로(Pointing grade)의 설계를 목표로 하고 있다. 두 번째 목표는 광검출기의 출력신호를 고속 ADC로 직접 변환 후 디지털 신호처리를 하는 FOG용 FPGA 개발이다. 본 연구에서 사용한 Cascaded integrator-comb(CIC)타입의 데시메이션 필터는 Adder와 Shift register만으로 구성되어 적은 계산량을 요구하므로 모든 디지털 FOG 프로세서를 저가의 프로세서로도 사용이 가능하다.

• 제어로봇시스템학회논문지
• /
• 제6권2호
• /
• pp.207-216
• /
• 2000

This paper introduces an effective system design method to develop a customer oriented product using a design optimization process and to select a set of critical design paramenters,. The process results in the development of a successful product satisfying customer needs and reducing development risk. The proposed scheme adopted a five step QFD(Quality Function Deployment) in order to extract design parameters from customer needs and evaluated their priority using risk factors for extracted design parameters. In this process we determine critical design parameters and allocate them to subsystem designers. Subsequently design engineers develop and test the product based on these parameters. These design parameters capture the characteristics of customer needs in terms of performance cost and schedule in the process of QFD, The subsequent risk management task ensures the minimum risk approach in the presence of design parameter uncertainty. An application of this approach was demonstrated in the development of weld quality monitoring system. Dominant design parameters affect linearity characteristics of weld defect feature vectors. Therefore it simplifies the algorithm for adopting pattern classification of feature vectors and improves the accuracy of recognition rate of weld defect and the real time response of the defect detection in the performance. Additionally the development cost decreases by using DSP board for low speed because of reducing CPU's load adopting algorithm in classifying weld defects. It also reduces the cost by using the single sensor to measure weld defects. Furthermore the synergy effect derived from the critical design parameters improves the detection rate of weld defects by 15% when compared with the implementation using the non-critical design parameters. It also result in 30% saving in development cost./ The overall results are close to 95% customer level showing the effectiveness of the proposed development approach.

• Journal of Power Electronics
• /
• 제17권1호
• /
• pp.115-126
• /
• 2017

This paper presents a new cascaded asymmetrical single phase multilevel converter with a reduced number of isolated DC sources and power semiconductor switches. The proposed inverter has only two H-bridges connected in cascade, one switching at a high frequency and the other switching at a low frequency. The Low Switching Frequency Inverter (LSFI) generates seven levels whereas the High Switching Frequency Inverter (HSFI) generates only two levels. This paper also presents a solution to the capacitor balancing issues of the LSFI. The proposed inverter has lot of advantages such as reductions in the number of DC sources, switching losses, power electronic devices, size and cost. The proposed inverter with a capacitor voltage balancing algorithm is simulated using MATLAB/SIMULINK. The switching logic of the proposed inverter with a capacitor voltage balancing algorithm is developed using a FPGA SPATRAN 3A DSP board. A laboratory prototype is built to validate the simulation results.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권1호
• /
• pp.33-38
• /
• 2006

This paper proposes a simple MPPT control scheme of a based Current-Control-Loop system that can be obtains a lot of advantage to compare with another digital control method, P&O(Perturbation and Observation) and IncCond(Incremental Conductance) algorithm, that is applied mostly a PV system. An existent method is needed an expensive processor such as DSP that calculated to change the measure power of a using current and voltage sensor at the once. Therefore, it is applied a small home power generation system that required many expenses. But, a proposed method is easy to solve the cost reduction and power unbalance Problems that it is used by control scheme to limit error of a current control of common sensor. This proposed algorithm had verified through a simulation and an experiment results on battery charger using PIC that is the microprocessor of a low price.