• The korean journal of orthodontics
• /
• v.46 no.5
• /
• pp.331-342
• /
• 2016

Objective: To evaluate the accuracy and reliability of the diagnostic tools available for assessing maxillary transverse deficiencies. Methods: An electronic search of three databases was performed from their date of establishment to April 2015, with manual searching of reference lists of relevant articles. Articles were considered for inclusion if they reported the accuracy or reliability of a diagnostic method or evaluation technique for maxillary transverse dimensions in mixed or permanent dentitions. Risk of bias was assessed in the included articles, using the Quality Assessment of Diagnostic Accuracy Studies tool-2. Results: Nine articles were selected. The studies were heterogeneous, with moderate to low methodological quality, and all had a high risk of bias. Four suggested that the use of arch width prediction indices with dental cast measurements is unreliable for use in diagnosis. Frontal cephalograms derived from cone-beam computed tomography (CBCT) images were reportedly more reliable for assessing intermaxillary transverse discrepancies than posteroanterior cephalograms. Two studies proposed new three-dimensional transverse analyses with CBCT images that were reportedly reliable, but have not been validated for clinical sensitivity or specificity. No studies reported sensitivity, specificity, positive or negative predictive values or likelihood ratios, or ROC curves of the methods for the diagnosis of transverse deficiencies. Conclusions: Current evidence does not enable solid conclusions to be drawn, owing to a lack of reliable high quality diagnostic studies evaluating maxillary transverse deficiencies. CBCT images are reportedly more reliable for diagnosis, but further validation is required to confirm CBCT's accuracy and diagnostic superiority.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.37 no.4
• /
• pp.255-263
• /
• 2011

Introduction: Maxillomandibular fixation (MMF) is essential before surgery under general anesthesia in maxillofacial trauma patients. MMF is used basically to reconstruct the occlusion and occlusal stability to recover the facial shape and oral functions. The arch bar and wire is a traditional method for MMF, but it can not only bring pressure to the periodontal ligaments and teeth but also cause a penetrating injury to the surgeons. Materials and Methods: In this study, 198 patients with an open reduction using a manual reduction without MMF from September 2005 to May 2010 in Dankook University Dental Hospital were subjected to a follow-up evaluation during the postoperative 4 months periods. This study evaluated the incidence of complications according to the condition of the patient (gender, age), the state of bony union of the fracture sites and a numeric rating scale evaluation for postoperative pain scoring. Results: 1. The complications were classified into major and minor according to the seriousness, and the major complication rate was as low as 2.02%. Only 2 cases of re-operations (1.01%) were encountered. In the classification according to the fracture line, plate fracture was observed in both cases of mandibular symphysis fracture, and angle fractures and loosening of two screws were noted in the case of mandibular angle fracture. 2. The complication rate was similar regardless of gender and age. 3. The degree of bony union was satisfactory, and the complication rate was reduced as the bony union improved. 4. More patients complained of pain as the operation time was increased. Conclusion: The use of MMF is not always necessary if a skilled assistant is provided to help manually reduce the fracture site. Compared to other studies of mandibular fracture surgery using MMF, the complication rate was similar using only manual reduction and the patients' discomfort was reduced without MMF.

• Journal of Korean Association for Spatial Structures
• /
• v.12 no.1
• /
• pp.87-98
• /
• 2012

In this study, mechanical role of edge beams in the gabled hyperbolic paraboloid shells was investigated through the comparisons of Finite element(FE) analysis results between the shells structures with and without edge beams. In addition, the effects of roof slope was studied. FE analysis showed that roof loads was directly transferred to the supports at corners by the arch action in the diagonal direction of the shells, thus, less member forces in the edge and ridge beams but higher stresses near supports were estimated than those from the membrane theory. When the edge beams were removed, stress concentration in the shells near the supports and the deflections along the shell edge were increased. Such phenomenon were intensified as the roof slope decrease. Thus, in gable hyperbolic paraboloid shell, the thickness of the shell near supports needs to be increased and careful investigation should be made in the cases when the roof height is low and/or the edge beams are removed.

• Structural Engineering and Mechanics
• /
• v.44 no.6
• /
• pp.775-799
• /
• 2012

This work approaches the structural performance of masonry arches that have a small ratio between number of vossoirs and span length. The aim of this research is to compare and validate three different methods of analysis (funicular limit analysis F.L.A., kinematic limit analysis K.L.A. and plane stress Finite Element Analysis F.E.A.) with an experimental campaign. 18 failure tests with arches of different shapes and boundary conditions have been performed. The basic failure mechanism was the formation of enough hinges in the geometry. Nevertheless, in few cases, sliding between vossoirs also played a relevant influence. Moreover, few arches didn't reach the collapse. The FLA and KLA didn't find a solution close to the experimental values for some of the tests. The low number of vossoirs and joints become a drawback for an agreement between kinematic mechanism, equilibrium of forces and geometry constraints. FLA finds a lower bound whereas KLA finds an upper bound of the ultimate load of the arch. FEA is the most reliable and robust method and it can reproduce most of the mechanism and ultimate loads. However, special care is required in the definition of boundary conditions for FEA analysis. Scientific justification of the more suitability of numerical methods in front of classic methods at calculating arches with a few vossoirs is the main original contribution of the paper.

• Physical Therapy Korea
• /
• v.28 no.2
• /
• pp.132-137
• /
• 2021

Background: Flat feet can be identified by assessing the collapse of the medial longitudinal arch (MLA) and these conditions can trigger epidemiological changes in the feet. Many of previous studies compared the muscle activity of lower body in terms of intervention and dynamics to treat the structural defect of flat feet. However, few studies have investigated or analyzed the muscle activity of gastrocnemius muscle in the subjects with flat feet. Objects: This study investigated the differences in changes of medial and lateral plantar flexors in subjects with flat feet during bipedal heel-rise (BHR) task and analyzed the differences in muscle activity between two groups by measuring the electromyography (EMG) of abductor hallucis (AH), tibialis anterior (TA), medial gastrocnemius (MG), lateral gastrocnemius (LG). Methods: A total of Twenty one adult females participated in this experiment. Subjects were assigned to groups according to the navicular drop test. The task was applied to the leg, where the heel lifting action prevailed. The muscle activity of the medial and lateral feet plantar flexors was evaluated, and the % maximum voluntary isometric contractions (%MVIC) of these were compared. Results: For the difference between groups the muscle activity (%MVIC) of LG muscle was statistically significantly low in flat feet group compared to healthy feet group (flat feet: 64.57, healthy feet: 90.17; p < 0.05). Conclusion: The results of this study will contribute to identifying the muscle activities of medial and lateral feet plantar flexors among subjects with flat feet, which can cause abnormal epidemiological changes in the feet.

• Journal of Preventive Medicine and Public Health
• /
• v.52 no.4
• /
• pp.250-257
• /
• 2019

Objectives: Flatfoot, or low medial longitudinal arch, contributes to back and lower extremity injuries and is caused by weak abductor hallucis (AbdH) muscles. The purpose of this study was to investigate the effects of short foot exercise (SFE) alone or with neuromuscular electrical stimulation (NMES) on navicular height, the cross-sectional area (CSA) of the AbdH muscle, and AbdH muscle activity in flexible flatfoot. Methods: Thirty-six otherwise healthy people with flexible flatfoot were randomly assigned to a group that received SFE with placebo NMES treatment (the control group) or a group that received both SFE and NMES treatment (the experimental group). Each group received 4 weeks of treatment (SFE alone or SFE with NMES). Navicular height, the CSA of the AbdH muscle, and AbdH muscle activity were assessed before and after the intervention. Results: No significant differences were found in navicular height or the CSA of the AbdH muscle between the control and experimental groups, while AbdH muscle activity showed a statistically significant difference between the groups ($SFE=73.9{\pm}11.0%$ of maximal voluntary isometric contraction [MVIC]; SFE with $NMES=81.4{\pm}8.3%$ of MVIC; p<0.05). Moreover, the CSA of the AbdH muscle showed a statistically significant increase after treatment in the SFE with NMES group ($pre-treatment=218.6{\pm}53.2mm^2$ ; $post-treatment=256.9{\pm}70.5mm^2$ ; p<0.05). Conclusions: SFE with NMES was more effective than SFE alone in increasing AbdH muscle activity. Therefore, SFE with NMES should be recommended to correct or prevent abnormalities in people with flexible flatfoot by a physiotherapist or medical care team.

• Restorative Dentistry and Endodontics
• /
• v.33 no.5
• /
• pp.463-471
• /
• 2008

This study investigated the clinical effectiveness and safety of sealed bleaching compared to conventional in-office bleaching using a randomized clinical trial of split arch design. Ten participants received a chairside bleaching treatment on the upper anterior teeth, and each side was randomly designated as sealed or control side. A mixture of Brite powder (PacDent, Walnut, USA), 3% hydrogen peroxide and carbamide peroxide (KoolWhite, PacDent, Walnut, USA) were used as bleaching agent. The control side was unwrapped and the experimental side was covered with a linear low density polyethylene (LLDPE) wrap for sealed bleaching. The bleaching gel was light activated for 1 hour. The tooth shades were evaluated before treatment, after treatment, and at one week check up by means of a visual shade (VS) assessment using a value oriented shade guide and a computer assisted shade assessment using a spectrophotometer (SP). The data were analyzed by paired t-test. In the control and sealed groups, the visual shade scores after bleaching treatment and at check up showed statistically significant difference from the preoperative shade scores (p<.05). The shade scores of the sealed group were significantly lighter than the control immediately after bleaching and at the check-up appointment (p<0.05). Compared to prebleaching status, the ${\Delta}E$ values at post bleaching condition were $4.35{\pm}1.38\;and\;5.08{\pm}1.34$ for the control and sealed groups, respectively. The ${\Delta}E$ values at check up were $3.73{\pm}1.95\;and\;4.38{\pm}2.08$ for the control and sealed groups. ${\Delta}E$ values were greater for the sealed group both after bleaching (p<.05) and at check up (p<.05). In conclusion, both ${\Delta}E$ and shade score changes were greater for the sealed bleaching group than the conventional bleaching group, effectively demonstrating the improvement of effectiveness through sealing.

• Korean Journal of Environment and Ecology
• /
• v.34 no.4
• /
• pp.304-317
• /
• 2020

This study conducted selected two sites in Geumnamhonam and four sites in Honam-Jeongmaek for vegetation survey with consideration to the location environment and anthropogenic impacts to investigate the vegetation structures of the Geumnamhonam-Jeongmaek·Honam-Jeongmaek ridge areas. Using TWINSPAN (two-way indicator species analysis), each of the two ridge areas were categorized into seven plant communities. The differential species in the TWINSPAN technique indirectly represent the environmental factors of plant communities, and the community types of the two ridge areas were divided based on environmental factors such as altitudes above sea level, soil moisture, and disturbance. These results were in harmony with the environmental factors of the DCA (detrended correspondence analysis) axis 1. In the low-lying areas of both ridge areas, afforestation tree species such as Pinus rigida and P. thunbergii were in competition with native tree species. As such, in the low-lying areas, artificial vegetation disturbance was severe due to afforestation and development projects. In relatively highland areas, such as upper slopes, and top areas, in the ridge, the vegetation type with the dominance of Quercus mongolica, Q. variabilis, and P. densiflora was preserved well. As for differences between the two ridge areas, communities dominated by Q. mongolica were distributed widely in Geumnamhonam-Jeongmaek because of the altitudes above sea level, and the latitude of this ridge area are higher than those of Honam-Jeongmaek. On the other hand, communities dominated by P. densiflora were distributed along with communities dominated by Q. mongolica, and communities dominated by Q. variabilis appeared in Honam-Jeongmaek because it is adjacent to the south coast. In quantitative vegetation analysis such as TWINSPAN and DCA, changes in species composition and the extracting environmental factors that cause the changes are important. To that end, the removal of accidental emergent species, the establishment of an investigation plan that assumes environmental factors, and the selection of the optimal analytical method suitable for the characteristics of the survey data are necessary.

• Journal of Chest Surgery
• /
• v.35 no.6
• /
• pp.430-438
• /
• 2002

It is known that low birth weight is a risk factor for poor outcome in cardiac surgery for many cardiac defects. We reviewed our recent surgical experiences on congenital heart defect (other than patent ductus arteriosus) in low birth weight babies. Material and Method: From September 1994 to February 2001, 31 consecutive infants weighing 2500 g or less underwent cardiac surgery with (OHS group n=12) or without cardiopulmonary bypass (CHS group n=19). A retrospective study was carried out to evaluate short-and intermediate-term outcome. Mean gestational age and age at operation were 36.9 weeks(range, 32.3-42weeks) and 32.1days (range, 0-87days) respectively. Mean body weight at birth and operation were 1972g (range, 1100-2500g) and 2105g (range, 1450-2500 g) respectively. There was no difference between the two groups in age and body weight. Defects included ventricular septal defect (VSD) (n=3), VSD with arch anomaly (n=2), total anomalous pulmonary venous return (n=2), transposition of the great arteries (TGA) (n=2), truncus arteriosus (n=2), and univentricular heart with cor triatriatum (n=1) in OHS group, and coarctation of aorta (n=7), tetralogy of Fallot (TOF) (n=3), TOF with pulmonary atresia (n=3), multiple muscular VSDs (n=1), double outlet right ventricle (n=1), pulmonary atresia with intact ventricular septum (n=2), tricuspid atresia (n=1), and TGA with multiple VSD (n=1) in CHS group. 13 patients (41.9%) were intubated pre-operatively. Result: There were 4 early deaths(＜30 days); 1 (8.3%) in OHS group and 3 (15.8%) in non-OHS group. All these early deaths were related to the pulmonary artery banding(PAB). There was no operative mortality in infants undergoing complete repair and palliative operations other than PAB. Delayed sternal closure was required in 3 patients. Prolonged postoperative mechanical ventilation (>7 days) was required in 7 patients(58.3%) in OHS and 7(38.8%) in CHS group. Late mortality occurred in 3 patients, two of which were non-cardiac. A patient in OHS group was documented to have neurologic sequelae. All the survivors except two are in NYHA class 1. Conclusion: Complete repair and palliative operations other than PAB can be performed in low birth weight infants with low operative mortality and an acceptable intermediate-term result. However, about a half of the patients required long-term postoperative mechanical ventilation.

• Journal of Chest Surgery
• /
• v.44 no.2
• /
• pp.115-122
• /
• 2011

Background: The intramural coronary artery has been known as a risk factor for early death after an arterial switch operation (ASO). We reviewed the morphological characteristics and evaluated the early and mid-term results of ASO for patients with an intramural coronary artery. Materials and Methods: From March 1994 to September 15th 2010, 158 patients underwent ASO at Dong-A and Pusan National University Hospitals for repair of transposition of the great arteries and double outlet right ventricle. Among these patients, 14 patients (8.9%) had an intramural coronary artery. Mean age at operation was $13.4{\pm}10.2$ days (4 to 39 days) and mean body weight was $3.48{\pm}0.33$ kg (2.88 to 3.88 kg). All patients except one were male. Eight patients had TGA/IVS and 4 patients had an aortic arch anomaly. Two patients (14.3%) had side-by-side great artery relation, of whom one had an intramural right coronary artery and the other had an intramural left anterior descending coronary artery. Twelve patients had anterior-posterior relation, all of whom had an intramural left coronary artery (LCA). The aortocoronary flap technique was used in coronary transfer in 8 patients, of whom one patient required a switch to the individual coronary button technique 2 days after operation because of myocardial ischemia. An individual coronary button implantation technique was adopted in 6, of whom 2 patients required left subclavian artery free graft to LCA during the same operation due to LCA injury during coronary button mobilization and LCA torsion. Results: There was 1 operative death (7.1%), which occurred in the first patient in our series. This patient underwent an aortocoronary flap procedure for coronary transfer combining aortic arch repair. Overall operative mortality for 144 patients without an intramural coronary artery was 13.2% (19/144). There was no statistical difference in operative mortality between the patients with and without an intramural coronary artery (p>0.1). There was no late death. The mean follow-up duration was $52.1{\pm}43.0$ months (0.5 to 132 months). One patient who had a subclavian artery free graft required LCA stenting 6.5 years after surgery for LCA anastomotic site stenosis. No other surviving patient needed any intervention for coronary problems. All patients had normal ventricular function at latest echocardiography and were in NYHA class 1. Conclusion: The arterial switch operation in Transposition of Great Arteries or Double Outlet Right Ventricle patients with intramural coronary can be performed with low mortality; however, there is a high incidence of intraoperative or postoperative coronary problems, which can be managed with conversion to the individual coronary button technique and a bypass procedure using a left subclavian free graft. Both aortocoronary flap and individual coronary button implantation techniques for coronary transfer have excellent mid-term results.