• 제목/요약/키워드: Low Pressure Stage

검색결과 312건 처리시간 0.022초

Vacuum Carburizing System for Powdered Metal Parts & Components

  • Kowakewski, Janusz;Kucharski, Karol
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
    • /
    • pp.1018-1021
    • /
    • 2006
  • Powdered metal parts and components may be carburized successfully in a vacuum furnace by combining carburizing technology $VacCarb^{TM}$ with a hi-tech control system. This approach is different from traditional carburizing methods, because vacuum carburizing is a non-equilibrium process. It is not possible to set the carbon potential as in a traditional carburizing atmosphere and control its composition in order to obtain a desired carburized case. This paper presents test results that demonstrate that vacuum carburizing system $VacCarb^{TM}$ carburized P.M. materials faster than traditional steel with acceptable results. In the experiments conducted, PM samples with the lowest density and open porosity showed a dramatic increase in the surface carbon content up to 2.5%C and a 3 times deeper case. Currently the boost-diffusion technique is applied to control the surface carbon content and distribution in the case. In the first boost step, the flow of the carburizing gas has to be sufficient to saturate the austenite, while avoiding soot deposition and formation of massive carbides. To accomplish this goal, the proper gas flow rate has to be calculated. In the case of P.M. parts, more carbon can be absorbed by the part's surface because of the additional internal surface area created by pores present in the carburized case. This amount will depend on the density of the part, the densification grade of the surface layer and the stage of the surface. "as machined" or "as sintered". It is believed that enhanced gas diffusion after initial evacuation of the P.M. parts leads to faster carburization from within the pores, especially when pores are open . surface "as sintered" and interconnected . low density. A serious problem with vacuum carburizing is delivery of the carbon in a uniform manner to the work pieces. This led to the development of the different methods of carburizing gas circulation such as the pulse/pump method or the pulse/pause technique applied in SECO/WARWICK's $VacCarb^{TM}$ Technology. In both cases, each pressure change may deliver fresh carburizing atmosphere into the pores and leads to faster carburization from within the pores. Since today's control of vacuum carburizing is based largely on empirical results, presented experiments may lead to better understanding and improved control of the process.

  • PDF

SP-Creep 시험의 응력 및 변형률 환산에 의한 초임계압 발전설비용 9Cr1Mo강의 크리프 특성 평가 (Creep Characterization of 9Cr1Mo Steel Used in Super Critical Power Plant by Conversion of Stress and Strain for SP-Creep Test)

  • 백승세;박정훈;유효선
    • 대한기계학회논문집A
    • /
    • 제30권9호
    • /
    • pp.1034-1040
    • /
    • 2006
  • Due to the need of increasing thermal efficiency, supercritical pressure and temperature have been utilized in power plants. It is well known that 9Cr1Mo steel is suitable fer use in power plants operating at supercritical conditions. Therefore, to ensure the safety and the soundness of the power plant, creep characterization of the steel is important. In this study, the creep characterization of the gCr1Mo steel using small punch creep(SP-Creep) test has been described. The applied load and the central displacement of the specimen in SP-Creep test have been converted to bearing stress and strain of uc, respectively. The converted SP-Creep curves clearly showed the typical three-stage behavior of creep. The steady-state creep rate and the rupture time of the steel logarithmically changed with the bearing stress and satisfied the Power law relationship. Furthermore, the Larson-Miller parameter of the SP-Creep test agreed with that of the tensile creep test. From the comparison with low Cr-Mo steels, the creep characteristics of 9Cr1Mo steel proved to be superior. Thus, it can be confirmed that the 9Cr1Mo steel is suitable for supercritical power plant.

고정된 터빈 블레이드의 베인에 대한 상대위치 변화가 끝단면 및 슈라우드의 열/물질전달 특성에 미치는 영향 (Effect of Vane/Blade Relative Position on Heat/Mass Transfer Characteristics on the Tip and Shroud for Stationary Turbine Blade)

  • 이동호;조형희
    • 대한기계학회논문집B
    • /
    • 제30권5호
    • /
    • pp.446-456
    • /
    • 2006
  • The effect of relative position of the stationary turbine blade for the fixed vane has been investigated on blade tip and shroud heat transfer. The local mass transfer coefficients were measured on the tip and shroud fur the blade fixed at six different positions within a pitch. A low speed stationary annular cascade with a single turbine stage was used. The chord length of the tested blade is 150 mm and the mean tip clearance of the blade having flat tip is 2.5% of the blade chord. A naphthalene sublimation technique was used for the detailed mass transfer measurements on the tip and the shroud. The inlet flow Reynolds number based on chord length and incoming flow velocity is fixed to $1.5{\times}10^5$. The results show that the incoming flow condition and heat transfer characteristics significantly change when the relative position of the blade changes. On the tip, the size of high heat/mass transfer region along the pressure side varies in the axial direction and the difference of heat transfer coefficient is up to 40% in the upstream region of the tip because the position of flow reattachment changes. On shroud, the effect of tip leakage vortex on the shroud as well as tip gap entering flow changes as the blade position changes. Thus, significantly different heat transfer patterns are observed with various blade positions and the periodic variation of heat transfer is expected with the blade rotation.

시그모이드 함수를 이용한 다중 계측데이터 모니터링 시스템 (Multimetric Measurement Data Monitoring System Using Sigmoid Function)

  • 송정호;신준우;한희수
    • 지질공학
    • /
    • 제33권1호
    • /
    • pp.137-149
    • /
    • 2023
  • 구조물에 작용하는 토압의 방향과 장기변위상태변화를 직관적으로 파악하기 위해 수평, 수직방향의 변위 데이터를 시그모이드 함수를 이용하여 가공하고 각각 좌표계의 한 축으로 하여 변위좌표계 시스템을 설정하였다. 이러한 변위좌표계에 변위상태(압축 또는 팽창) 구분영역과 관리단계 구분영역 설정하여 각 계측지점의 변위상태와 관리단계를 직관적으로 확인할 수 있었다. 관측점을 연속적으로 나타내어 변위경로를 나타내었으며, 변위경로를 통해 변위이력, 변위추세, 지반에 작용하는 응력방향 등을 알 수 있었다. 흙막이 가시설의 실계측데이터 분석 결과 모든 계측지점에서 응력해방 방향으로 변위가 일어났으며, 정상관리상태에 위치하였다. 또한 공간적 상관성이 높은 계측지점 간 거동은 비슷한 거동추세를 보였으며, 공간적 상관성이 낮은 계측지점 간에는 상이한 거동 추세를 보였다. 공간적으로 연속되어 분포하는 지표침하데이터를 변위좌표계를 이용하여 전조현상과 거동영역에 대한 상관성 분석을 수행하면 파괴시간, 영역 예측이 가능 할 것으로 판단된다.

다공질 공기 베어링을 적용한 반도체 웨이퍼 연마용 스핀들 개발 (Development of Wafer Grinding Spindle with Porous Air Bearings)

  • 이동현;김병옥;전병찬;허균철;김기수
    • Tribology and Lubricants
    • /
    • 제39권1호
    • /
    • pp.28-34
    • /
    • 2023
  • Because of their cleanliness, low friction, and high stiffness, aerostatic bearings are used in numerous applications. Aerostic bearings that use porous materials as means of flow restriction have higher stiffness than other types of bearings and have been successfully applied as guide bearings, which have high motion accuracy requirements. However, the performances of porous bearings exhibit strong nonlinearity and can vary considerably depending on design parameters. Therefore, accurate prediction of the performance characteristics of porous bearings is necessary or their successful application. This study presents a porous bearing design and performance analysis for a spindle used in wafer polishing. The Reynolds and Darcy flow equations are solved to calculate the pressures in the lubrication film and porous busing, respectively. To verify the validity of the proposed analytical model, the calculated pressure distribution in the designed bearing is compared with that derived from previous research. Additional parametric studies are performed to determine the optimal design parameters. Analytical results show that optimal design parameters that obtain the maximum stiffness can be derived. In addition, the results show that cross-coupled stiffness increases with rotating speed. Thus, issues related to stability should be investigated at the design stage.

새송이버섯 병재배에서 환기방법이 이산화탄소 농도 및 자실체형성에 미치는 영향 (Effects of Various Ventilation Systems on the Carbon Dioxide Concentration and Fruiting Body Formation of King Oyster Mushroom (Pleurotus eryngii) Grown in Culture Bottles)

  • 이현욱;안미정;이신우;이철호
    • 생명과학회지
    • /
    • 제17권1호
    • /
    • pp.82-90
    • /
    • 2007
  • 새송이버섯 재배에서 환기방법이 실내의 이산화탄소 농도 및 자실체형성에 미치는 영향을 알아보기 위하여 평압형, 양압형, 음압형, 복합형의 4종의 환기방법을 사용하여 환기효율, 재배효율 및 생리장해발생정도를 포장에서 조사하였다. 그 결과 복합형의 경우, 실내 이산화탄소 농도가 평압형의 경우 1,400 ppm인 것에 비해 800 ppm으로서 현저하게 낮았고, 기류발생정도도 상대적으로 적어 환기효율이 가장 높은 것으로 나타났다. 대의 길이, 갓의 직경, 품질, 수량 등의 재배효율이 복합형에서 가장 높았으며, 수확소요일수가 단축 되었다. 생리장해의 발생에 있어서는, 세균점액증상, 비늘대증상 및 굴곡대증상의 경우에서는 환기방법에 따라 큰 차이를 보이지 않았으나, 오뚝이증상, 진무름증상 및 갈반증상은 이산화탄소 농도가 다른 환기방법에 비해 낮았던 복합형과 음압형에서 현저하게 줄어드는 경향을 보였다. 전체적으로 볼 때, 평압형 환기방법은 환기효율이 낮아 실내 이산화탄소농도를 유효하게 밖으로 배출해 내지 못함으로서 품질과 수량을 현저하게 떨어뜨리고, 생리장해의 발생을 유도하는 결과를 초래하였으며, 양압형 또한 평압형에 비해 효율성이 다소 높은 경향을 보였으나, 이들 2종은 새송이 버섯의 연중재배에 이용되는 환기방법으로 부적절한 것으로 나타났다. 음압형의 경우 상대적으로 효율성이 높은 환기방법으로서 어느 정도 도입의 가능성을 시사하고 있으나, 복합형이 환기효율, 재배효율 및 생리장해억제효과가 가장 우수한 것으로 조사되어, 새송이버섯 재배에서 복합형 환기방법을 도입할 경우, 품질향상과 생산성향상은 물론 연중 안전재배를 기대할 수 있을 것으로 사료된다. 도움이 되리라 생각된다.리고 실험에 사용된 송신부 및 수신부를 사진으로 보였으며, 이것을 이용하여 통신 수신율을 분석하였다. 주파수에서 측정된 Type 1 안테나의 전기적 성능은 원형 도체 배열을 10개 적층(disk10)하였을 때, 15.65 dBi의 최대 안테나 이득과 11.4 dB 이상의 입력 반사 손실 성능을 보여 주었으며, 다층 원형 도체 배열 구조에 의해 약 5 dB의 이득 향상 효과를 얻을 수 있었다. 또한, 원형 도체를 12개 적층하였을 때, 외곽 유전체 링 효과에 의해 Type 1 안테나는 Type 2 안테나보다 상대적으로 약 1.35 dB 만큼 이득이 더 높았으며, 각 안테나의 3 dB 빔 폭은 각각 약 $28^{\circ}$$36^{\circ}$로 측정되었다.. 그러나 기흉 발생 당일은 기흉이 발생하지 않은 날 당일보다 전일 대비 평균 기온이 높고(0.533 vs. $-0.103^{\circ}C$, RR 1.141, Cl $1.038{\sim}l.255$, p=0.006), 기온상승폭도 컸다(9.209 vs. $7.754^{\circ}C$, RR 1.123, Cl $1.061{\sim}1.190$, p=0.000). 결론: 본 연구의 결과를 통해 저자들은 기압이 상승한 뒤 기온이 상승했다. 하강하는 약 4일간의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수

배지내 EC와 함수율이 착색단고추의 과병무름증과 배꼽썩음과 발생에 미치는 영향 (Effects of Substrate EC and Water Content on the Incidence of Brown Fruit Stem and Blossom End Rot in Glasshouse Sweet Pepper)

  • 유근;최동근;배종향;곽성희
    • 생물환경조절학회지
    • /
    • 제15권2호
    • /
    • pp.167-172
    • /
    • 2006
  • 본 연구의 목적은 배지함수율과 EC수준이 시설 착색단고추(적색계 'Special')의 과병무름증과 배꼽썩음과의 발생에 미치는 영향을 구명하는 것이었다. 첫 번째 착과 된 과일의 직경이 3cm정도 되었을 때 배지의 EC와 함수율을 각각 세 수준으로 달리하여 처리하였다. 즉, 함수율은 49, 65, 86%로, EC는 2.4, 4.2, $6.3dS{\cdot}m^{-1}$로 달리하였는데 각각에서 세 수준은 저수준, 중간, 고수준으로 명명하였다. 줄기생장은 함수율이 감소할수록 감소하였고, EC가 고수준이나 저수준일 때 중간수준에 비해서 적었다. 수확 시 과중은 중간수준 이상의 함수율처리가 저수준 함수율보다 더 높았으며 (158g vs 146g), 고수준 EC처리는 중간수준 이하의 EC처리구에 비해서 적었다. 과병무름증 발생은 함수율이 높을수록, EC가 감소할수록 증가하였다. 가장 높은 발생률은 고수준 함수율/저수준 EC 처리구로 약 38%의 발생률을 보였는데, 이는 저수준 함수율/고수준 EC 처리구의 2.4%보다 훨씬 더 높았다. 배꼽썩음과는 대개 배지함수율이 적고 EC가 높았을 때 발생하였다. 이러한 결과들은 동계작형 착색단고추 재배에서 생산성을 저해하는 과병무름증과 배꼽썩음과의 발생을 경감하기 위해서는 생육기별로 배지함수율과 EC를 구분해서 관리할 필요가 있음을 보여준다. 먼저, 과병무름 증상이 나타나기 시작하는 착색기에는 배지함수율은 낮게(49%),그리고 EC는 높게($6.3dS{\cdot}m^{-1}$)관리하여 과병무름증의 발생을 억제하고, 그리고 배꼽썩음과의 발생을 예방하기 위해서는 착과 후 5주까지 배지함수율은 중간(65%) 수준 이상으로, EC는 낮게($2.4dS{\cdot}m^{-1}$) 유지할 필요가 있다.

거도광산 열수변질대의 광물상과 상평형 연구 (Mineral Phases and Phase Diagram of Hydrothermal Alteration Zone in Geodo Mine, Korea)

  • 최진범;김수진
    • 한국광물학회지
    • /
    • 제16권1호
    • /
    • pp.49-63
    • /
    • 2003
  • 흔히 발견되지 않는 광물상들이 후기 열수변질광물로서 거도광산에서 관찰된다. 열수광물들은 스카른 광물들을 열수변질시키거나 공간충진 정출작용으로 산출된다. 즉, 투휘석, 석류석 및 장석들을 교대하여 녹니석과 포도석, 일라이트 및 펌펠리아이트 등을 산출하거나 열극이나 정동에서 정출한 것으로 포도석, 펌펠리아이트, 클리노조이사이트, 일라이트 및 Ca-불석(스틸바이트와 스텔러라이트) 등이 있다. 이들 열수광물들에 대해 X-선 회절분석, 주사전자현미경 관찰 및 전자현미분석을 통해 광물상과 산출상태 등이 상세히 규명되었다. 후기 공간충진 열수광물들을 대상으로 슈라이네마크 작도법에 의한 상평형 관계를 규명하였으며, 등온-등압 $\mu$$H_2O$-$\mu$$CO_2$상평형도를 작도하였다. 그 결과 초기에 정출된 포도석, 펌펠리아이트, 클리노조이사이트, 일라이트 및 녹니석은 비교적높은 $CO_2$분압과 낮은 $H_2$O 분압 하에서 먼저 정출되었으며, 그 후 $H_2$O 분압이 증가하면서 일라이트와 수반되어 스틸바이트와 방해석이 정출되었다.

댐 비상방류 설계기준 선정을 위한 수리수문학적 검토(I) (Hydraulic & Hydrologic Design Criteria for an Emergency Discharge of Reservoir (I))

  • 손광익;이재응
    • 한국수자원학회논문집
    • /
    • 제48권3호
    • /
    • pp.149-158
    • /
    • 2015
  • 비상방류시설은 안전한 댐 운영 및 유지관리를 위해서 절대적으로 필요한 시설임에도 불구하고 국내 댐의 경우 이를 고려한 설계가 이루어지지 않아 각 댐의 비상방류 대응 적정성을 판단하기 곤란한 상황이다. 특히 국내 댐의 경우 비상방류시설규모를 산정하는 기준이 일정치 않을 뿐만 아니라 대부분의 용수댐은 별도의 방류시설 조차도 없는 실정이다. 따라서 본 연구에서는 기존댐 방류시설 현황 분석, 국내외 비상방류시설 설계기준 등의 검토와 함께 국내 댐설계기준을 적용한 가상 댐체와 수어댐을 대상으로 수위에 따른 방류능 분석을 수행하였다. 또한 SEEP 프로그램 등을 활용, 수위저하 속도에 따른 제체의 사면 안정성을 검토함으로써 비상방류 시설의 적정규모 산정기준을 제시하고자 하였다. 이를 위하여 수리학적 해석을 통해 저류수심에 따른 제체에 작용하는 힘을 분석하였으며 수위저하 속도 변화에 따른 제체의 안정성을 검토하여 허용수위저하 속도 범위를 제시하였다. 수위 25% 저감은 하중을 50%까지 감소시켜 초기수위 저감이 중요한 것을 알 수 있었다. 가상 댐체는 물론 수어댐에 수위저하 속도 1 m/일을 적용하더라도 제체의 안전성은 보장됨을 확인하였다. 다만, 방류능과 방류 소요일수는 수위별 저류용량 등 저류지 특성과 밀접한 관계가 있어 초기대응을 위해서는 7~10일 이내에 저류수심의 25%를 먼저 방류시키고 나머지 방류량은 1~2개월 이내에 방류할 것을 제안하였다.

영동대설 예보지원시스템 개발 (Development of Yeongdong Heavy Snowfall Forecast Supporting System)

  • 권태영;함동주;이정순;김삼회;조구희;김지언;지준범;김덕래;최만규;김남원;남궁지연
    • 대기
    • /
    • 제16권3호
    • /
    • pp.247-257
    • /
    • 2006
  • The Yeong-dong heavy snowfall forecast supporting system has been developed during the last several years. In order to construct the conceptual model, we have examined the characteristics of heavy snowfalls in the Yeong-dong region classified into three precipitation patterns. This system is divided into two parts: forecast and observation. The main purpose of the forecast part is to produce value-added data and to display the geography based features reprocessing the numerical model results associated with a heavy snowfall. The forecast part consists of four submenus: synoptic fields, regional fields, precipitation and snowfall, and verification. Each offers guidance tips and data related with the prediction of heavy snowfalls, which helps weather forecasters understand better their meteorological conditions. The observation portion shows data of wind profiler and snow monitoring for application to nowcasting. The heavy snowfall forecast supporting system was applied and tested to the heavy snowfall event on 28 February 2006. In the beginning stage, this event showed the characteristics of warm precipitation pattern in the wind and surface pressure fields. However, we expected later on the weak warm precipitation pattern because the center of low pressure passing through the Straits of Korea was becoming weak. It was appeared that Gangwon Short Range Prediction System simulated a small amount of precipitation in the Yeong-dong region and this result generally agrees with the observations.