• The Korean Journal of Petroleum Geology
• /
• v.6 no.1_2 s.7
• /
• pp.25-36
• /
• 1998

Organic geochemical analyses were carried out in order to characterize organic matter (OM) in the sediments recovered from Korea/japan Joint Development Zone (JDZ V-1, V-3, VII-1 and VII-2) which is located in the northern end of the East China Sea Shelf Basin. Late Miocene sediments from the JDZ V-1 and V-3 wells generally contain less than $0.5\%$ of total organic carbon (TOC). However, early Miocene and Oligocene sediments show TOC values of $0.6-0.8\%$. Middle to late Miocene sediments are rich in TOC up to $20\%$ from JDZ VII-1 and JDZ VII-2 wells. The reason for this rich TOC might be attributed to the presence of coaly shales. Kerogens in the Tertiary sediments from the JDZ series wells are mainly composed of terrestrially derived woody organic matter. Elemental analyses indicate that OM from these wells can be compared to type III. Low hydrocarbon potential and hydrogen index reflect the type of OM. According to the biomarker analyses, the input of the terrestrial OM is prevalent. Oxidizing condition is also indicated by Pristane/Phytane ratio. Samples from the JDZ V-1 and V-3 wells obtain maturities equivalent to the oil generation zone around total depth, and organic matter below 3600 m from JDZ VII-1 and VII-2 wells reached dry gas generation stage. Oligocene sediments below 3500 m in the JDZ VII-1 and JDZ VII-2 wells may have generated limited amount of hydrocarbons, showing a progressive decrease in hydrogen index with depth, due to thermal degradation with increased burial. Gas shows and finely disseminated gilsonite may indicate the generation and migration of the hydrocarbons.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.2 no.2
• /
• pp.151-159
• /
• 1997

Benthic respiration and chemical fluxes were measured at the sediment-water interface underlying the marine fish cages floating on the open coastal waters off Tong-Young, the South Coast of Korea. The effects of cage farming on coastal benthic environment and on mass balance of organic carbon in the benthic boundary layer under the marine fish cages are addressed. In a growing season of caged fishes of June, 1995, benthic chambers and sediment traps were deployed on the sediment-water interfaces of the two sites chosen for this study: 1) Cage Site, directly underlying the fish cages of the farm at 18 m water depth, and 2) Control Site, about 100 m away from the farm at 32 m water depth. Benthic respiration rates and chemical fluxes were calculated from the evolution of dissolved oxygen and chemicals in the chamber water, and mass balance of organic carbon in the benthic boundary layer was constructed based on the vertical flux of particulate organic matter (POM) and chemical fluxes out of the sediment. High organic dumping (6400 mg C $m^{-2}d^{-1}$) and high benthic respiration (230 mmol $O_2\;m^{-2}d^{-1}$) were observed at the Cage Site. Equivalent to 40% of vertical flux of organic carbon into the Cage Site seemed to be decomposed concurrently and released back to overlying waters (2400 mg C $m^{-2}d^{-1}$). Consequently, up to 4000 mg C $m^{-2}d^{-1}$ of organic carbon could be buried into the farm sediment (equivalent to 60% of organic carbon flux into the Cage Site). At the Control Site, relatively less input of organic carbon (4000 mg C $m^{-2}d^{-1}$) and low benthic respiration rate (75 mmol $O_2\;m^{-2}d^{-1}$) were observed despite short distance away from the cages. The influence of cage farming on benthic chemical fluxes might be restricted and concentrated in the sea bottom just below the fish cages in spite of massive organic dumping and high current regime around the fish cage farm.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.4
• /
• pp.41-54
• /
• 2002

In this study, we have analyzed the effects of the membrane layer and the bragg reflector layers on the resonance characteristics through comparing the characteristics of the membrane type FBAR (Film Bulk Acoustic Wave Resonator) and the one type bragg reflector layers with those of the ideal FBAR with top and bottom electrode contacting air by using equivalent circuit technique. It is assumed that ZnO is used for piezoelectric film, $SiO_2$ are used for membrane layer and low acoustic impedance layer, W are used for the high acoustic reflector layer and Al is used for the electrode. Each layer is considered to have a acoustic propagation loss. ABCD parameters are picked out and input impedance is calculated by converting 1-port equivalent circuit to simplified equivalent circuit that ABCD parameters are picked out possible. From the variation of resonance frequency due to the change of thickness of electrode layers, reflector layers and membrane layer it is confirmed that membrane layer and the reflector layer just under the electrode have the greatest effect on the variation of resonance frequency. From the variation of resonance properties, K and electrical Q with the number of layers, K is not much affected by the number of layers but electrical Q increases with the number of layers when the number of layers is less than seven. The electrical Q is saturated when the number of layers is large than six. The electrical Q is dependent of mechanical Q of reflector layers and membrane layer. Both ladder filter and SCF (Stacked Crystal Filters) show higher insertion loss and out-of-band rejection with the increase of the number of resonators. The insertion loss decreases with the increase of the number of reflector layers but the bandwidth is not much affected by the number of reflector layers. Ladder Filter and SCF with membrane layer show the spurious response due to spurious resonance properties. Ladder filter shows better skirt-selectivity characteristics in bandwidth but SCF shows better characteristics in insertion loss.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.3
• /
• pp.186-195
• /
• 2018

A field study was conducted over a 3-year period from 2014 to 2016 in the central plain area, Suwon, Korea, 1) to compare the biomass production between machine-transplanted and water-broadcast seeded silage rice and 2) to elucidate the growth factors that affect the difference in biomass production between the two cultivation practices. The heading date for the water-broadcast seeded silage rice was September 11-18, which was delayed by 11-17 days when compared to that for the machine-transplanted silage rice. On average, water-broadcast seeded silage rice had a shorter plant height, more panicles per area, and a greater biomass production because of the increased straw dry weight. However, the difference in dry weight of each plant organ between the two cultivation practices exhibited yearly variation. When the data were pooled across experimental years, cultivation practices, and varieties, biomass production was highly positively correlated with straw dry weight but not with panicle dry weight. When the ratio of water-broadcast seeding to machine-transplanting was analyzed, total dry weight and straw dry weight were positively associated with each other, whereas no relationship was found between total dry weight and panicle dry weight. Despite that water-broadcast seeded silage rice produced more panicles per area than machine-transplanted silage rice, the two cultivation practices had a similar dry weight per culm. Therefore, we conclude that the silage rice from the water-broadcast seeding, compared to the machine-transplanting, produced more biomass because of the combination of the increased panicle number per area and a similar dry weight per culm. These results suggest that silage rice could be produced through water-broadcast seeding to increase biomass production with low labor and cost input.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.361-361
• /
• 2017

The NPK are known as macro elements that affect crop growth and yield. In 1989, Cambodia Agricultural Research and Development Institute (CARDI) gave a recommendation rate of fertilizer on rice production based on soil types. This recommended rate of NPK seems however relatively low as compared to farmers' practices nowadays and the amount in the neighboring countries. The CARDI recommended rate for Prateah Lang soil type is 50kg N, $25kg\;P_2O_5$, $25kg\;K_2O\;ha^{-1}$ while recent farmers' practice rates are 55 - 64kg N, 24 - 46kg $P_2O_5$, $30kg\;K_2O\;ha^{-1}$. However, the overuse of chemical fertilizer will lead to un-preferable plant growth, insect pest, disease and economic yield. Thus, we examined the effect of different NPK application rates on the growth and yield components in Prateah Lang soil type in Takeo province to investigate appropriate rates for improving rice productivity with economic efficiency. This study was conducted from July to November during wet season in 2013. A multi-locational trial with 6 treatments (T0 - T5) of NPK rates in 5 locations (trial 1 - 5) with 3 replications was conducted. The different combinations of NPK application were employed from 0, 50, 60, 80, 100, $120kg\;N\;ha^{-1}$, 0, 25, 30 45, $60kg\;P_2O_5\;ha^{-1}$ and 0, 15, 25, 30, $45kg\;K_2O\;ha^{-1}$. Urea, DAP and KCl were used for fertilization. Split application was employed [basal: 20% of N, 100% of P and K, top dressing-1st: 40% of N (30DAT), 2nd: 40% of N (PI stage)]. Three-week-old seedlings of var. Phka Rumdoul were transplanted with 2 - 3 seedlings $hill^{-1}$ with $20cm{\times}20cm$ spacing. Plant length, tiller number at the maximum tillering stage and yield components were measured. The different rates of NPK application affected some yield components. The panicle number per hill was the most important key component followed by the spikelet number per panicle. However, the other parameters such as the filled grain percentage and 1000 grains weight had small effect or weak relation with the yield. Although the panicle number per hill had a significantly positive correlation with the stem number per hill, it was not correlated with the percentage of productive culms. The variation in the grain yield among the 5 trials was small and the difference was not significant. Although the yield tended to be higher at higher N and P application, there was no significant difference above 60kg N and $30kg\;P_2O_5$. The yield was the highest at 15, 30 and $45kg\;K_2O$ followed by $25kg\;K_2O$. The relationships between N, P and the stem number per hill were significantly linear positive, though it was not linear between K and the stem number. From these results, to increase rice productivity in the target area, farmers' effort to increase N and P input rather than CARDI recommendation up to 60kg N and $30kg\;P_2O_5$ will be sufficient considering economic efficiency. Besides, the amount of K application should be reconsidered.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.363-363
• /
• 2017

The NPK are known as macro elements that affect crop growth and yield. In 1989, Cambodia Agricultural Research and Development Institute (CARDI) gave a recommendation rate of fertilizer on rice production based on soil types. This recommended rate of NPK seems however relatively low as compared to farmers' practices nowadays and the amount in the neighboring countries. The CARDI recommended rate for Prateah Lang soil type is 50kg N, 25kg P2O5, 25kg K2O ha-1 while recent farmers' practice rates are 55 - 64kg N, 24 - 46kg P2O5, 30kg K2O ha-1. However, the overuse of chemical fertilizer will lead to un-preferable plant growth, insect pest, disease and economic yield. Thus, we examined the effect of different NPK application rates on the growth and yield components in Prateah Lang soil type in Takeo province to investigate appropriate rates for improving rice productivity with economic efficiency. This study was conducted from July to November during wet season in 2013. A multi-locational trial with 6 treatments (T0 - T5) of NPK rates in 5 locations (trial 1 - 5) with 3 replications was conducted. The different combinations of NPK application were employed from 0, 50, 60, 80, 100, 120kg N ha-1, 0, 25, 30 45, 60kg P2O5 ha-1 and 0, 15, 25, 30, 45kg K2O ha-1. Urea, DAP and KCl were used for fertilization. Split application was employed [basal: 20% of N, 100% of P and K, top dressing-1st: 40% of N (30DAT), 2nd: 40% of N (PI stage)]. Three-week-old seedlings of var. Phka Rumdoul were transplanted with 2 - 3 seedlings hill-1 with $20cm{\times}20cm$ spacing. Plant length, tiller number at the maximum tillering stage and yield components were measured. The different rates of NPK application affected some yield components. The panicle number per hill was the most important key component followed by the spikelet number per panicle. However, the other parameters such as the filled grain percentage and 1000 grains weight had small effect or weak relation with the yield. Although the panicle number per hill had a significantly positive correlation with the stem number per hill, it was not correlated with the percentage of productive culms. The variation in the grain yield among the 5 trials was small and the difference was not significant. Although the yield tended to be higher at higher N and P application, there was no significant difference above 60kg N and 30kg P2O5. The yield was the highest at 15, 30 and 45kg K2O followed by 25kg K2O. The relationships between N, P and the stem number per hill were significantly linear positive, though it was not linear between K and the stem number. From these results, to increase rice productivity in the target area, farmers' effort to increase N and P input rather than CARDI recommendation up to 60kg N and 30kg P2O5 will be sufficient considering economic efficiency. Besides, the amount of K application should be reconsidered.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.16 no.3
• /
• pp.117-124
• /
• 2011

Many studies of the phytoplankton community structure have been conducted using the CHEMTAX program on the basis of the photosynthetic pigment concentrations measured by a HPLC (High-Performance Liquid Chromatography) technique. The CHEMTAX program determines the contribution of each phytoplankton class to total phytoplankton biomass (chlorophyll a) based on the ratios of marker pigment to chlorophyll a of phytoplankton group. In this study, the marker pigment/chlorophyll a ratios were investigated in phytoplankton species isolated from marine waters around the Korean peninsula. These results were used as the input pigment ratios of the CHEMTAX program to investigate phytoplankton community structure in Korean coastal waters (Yeoja and Gamak Bay). There were significant differences in the ratios of marker pigment to chlorophyll a among the different species within the same algal class. There was a significant difference between the values of our ratios and the previously used ratios in other regions of the world. When phytoplankton community composition was calculated using our initial ratios in Yeoja and Gamak Bay, our results were significantly different from the results calculated on the basis of initial ratios of marker pigment in phytoplankton suggested in other marine waters. The estimates of the contributions of the major algal groups (bacillariophyceae and dinophytes) to total chlorophyll a varied within 5% depending on the initial ratios chosen. The variations of estimates for the pico- and nanoplankton (cyanophytes and prasinophytes), which have relatively low contributions to total chlorophyll a, were higher than those for major algal group. Although the HPLC-pigment measurements combined with CHEMTAX analysis are useful for identifying and qualifying phytoplankton community structure, further researches for the pigment ratios of the dominant phytoplankton species presenting in a given area are also needed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.126-134
• /
• 2017

There have been numerous studies on extracting the R-peak from electrocardiogram (ECG) signals. However, most of the detection methods are complicated to implement in a real-time portable electrocardiograph device and have the disadvantage of requiring a large amount of calculations. R-peak detection requires pre-processing and post-processing related to baseline drift and the removal of noise from the commercial power supply for ECG data. An adaptive filter technique is widely used for R-peak detection, but the R-peak value cannot be detected when the input is lower than a threshold value. Moreover, there is a problem in detecting the P-peak and T-peak values due to the derivation of an erroneous threshold value as a result of noise. We propose a robust R-peak detection algorithm with low complexity and simple computation to solve these problems. The proposed scheme removes the baseline drift in ECG signals using an adaptive filter to solve the problems involved in threshold extraction. We also propose a technique to extract the appropriate threshold value automatically using the minimum and maximum values of the filtered ECG signal. To detect the R-peak from the ECG signal, we propose a threshold neighborhood search technique. Through experiments, we confirmed the improvement of the R-peak detection accuracy of the proposed method and achieved a detection speed that is suitable for a mobile system by reducing the amount of calculation. The experimental results show that the heart rate detection accuracy and sensitivity were very high (about 100%).

• Ocean and Polar Research
• /
• v.27 no.2
• /
• pp.125-133
• /
• 2005

This study described the phonology and reproductive potential of four species of Korean seagrasses, Zostera caespitosa, Z. caulescem, Z. Japonica and Z. marina. Z. caespitosa and Z. caulescens sampled from a mixed stand at the subtidal area of Yulpo Bay, Geojedo of the South Sea of Korea in November 2002 and August 2003. Z japonica and Z. marina occurred at the depth between the middle intertidal and shallow subtidal (<1m below mean sea level) of Seungbongdo (in Yellow Sea) samples collected in February and October 2003. The sexual reproductive phase of the four Zostera species was apparently different in timing of flowering, reproductive period, fruiting and seed maturing. Z. caespitosa flowered from February to early May $(10-16^{\circ}C)$, and its seed production completed in early May. The reproductive shoots of Z. caulescens began to appear in January $(9^{\circ}C)$, and its flowering followed from February to June $(10-19^{\circ}C)$. The flowers of Z. japonica were observed from July to September $(18-22^{\circ}C)$, and its seeds matured from August to September. The most commonly I marina flowered from April to August $(7-21^{\circ}C)$ and developed into seeds in July. Z. caulescens, the largest plant, had the highest number of seeds per shoot and longest spadix length. Z. marina, which was intermediate In size, recorded the highest reproductive potential. The study indicates that the reproductive phase and potential of the four species of seagrass from Korea are highly related to water temperature, and the populations of these species show a perennial lifespan with a low sexual reproductive input.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.55-62
• /
• 2006

Transverse cracks in continuously reinforced concrete pavement (CRCP) occur at early ages due to temperature and moisture variations. The width and spacing of transverse cracks have a significant effect on pavement performance such as load transfer efficiency and punchout development. Also, crack widths in CRCP depend on 'zero-stress temperature,' which is defined as a temperature where initial concrete stresses become zero, as well as drying shrinkage of concrete. For good long-term performance of CRCP, transverse cracks need to be kept tight. To keep the crack widths tight throughout the pavement life, zero-stress temperature must be as low as practically possible. Thus, temperature control at early ages is a key component In ensuring good CRCP performance. In this study, concrete temperatures were predicted using PavePro, a concrete temperature prediction program, for a CRCP construction project, and those values were compared with actual measured temperatures obtained from field testing. The cracks were also surveyed for 12 days after concrete placement. Findings from this study can be summarized as follows. First, the actual maximum temperatures are greater than the predicted maximum temperature in the ranges of 0.2 to 4.5$^{\circ}C$. For accurate temperature predictions, hydration properties of cementitious materials such as activation energy and adiabatic constants, should be evaluated and accurate values be obtained for use as input values. Second, within 24 hours of concrete placement, temperatures of concrete placed in the morning are higher than those placed in the afternoon, and the maximum concrete temperature occurred in the concrete placed at noon. Finally, from the 12 days of condition survey, it was noted that the rate of crack occurrence in the morning placed section was 25 percent greater than that in the afternoon placed section. Based on these findings, it is concluded that maximum concrete temperature has a significant effect on crack development, and boner concrete temperature control is needed to ensure adequate CRCP performance.