• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1019-1028
• /
• 2021

Emergency exit guidance lights were designed and manufactured to quickly determine the location of the emergency exit in the event of a fire using a gas sensor, an illumination sensor, a temperature sensor, an Arduino Uno, and a Bluetooth module. This research was designed such that, when a fire breaks out, a red arrow appears as the illuminance value is low and a green arrow as the illuminance value is high to improve visibility when detecting high temperature and smoke. In addition, it is designed to prevent more serious conflagration by applying an alarm sound and text transmission algorithm using a communication module to transmit text messages indicating a 174Hz alarm sound and a fire location to prevent more serious conflagration.

• Journal of Mushroom
• /
• v.7 no.3
• /
• pp.115-121
• /
• 2009

Recently sawdust cultivation of Shiitake mushroom (Lentinula edodes ) is getting increased because log cultivation is getting difficult to get oak logs. It is important to make mycelia browning on the substrate surface in sawdust cultivation. This browned surface plays an important role like as artificial bark of the oak log, which protects the other pests and suppresses water evaporation in the substrate. The period for mycelia browning is so long that the sawdust cultivation of Shiitake mushroom can not spread well into the mushroom farms. In this article we would like to discuss about the effect of environmental condition to the mycelial browning during sawdust bag cultivation for the To reduce the period required for browning of substrates, sawdust substrates was illuminated light with difference intensity. One hundred Lux light illumination was needed for producing normal yield of fruit body but fruit body yield was low and abnormally shaped fruit body was produced when cultured under the dark condition of incubation. Illumination over 200lux is necessary for the successful browning of substrates during incubation. Optimum incubation temperature for browning of substrates and fruiting was $25^{\circ}C$. The treatment of cotton plug with different size to identify the effect of aeration on the browning of substrates and fruiting showed rapid mycelial growth and reduced the periods for browning as the size of cotton plug was bigger. However, yield of fruit body was the highest at 16mm diameter cotton plug as compared to 20mm of that. $CO_2$ content in vessel of substrates was low as the size of cotton plug was bigger during incubation. $CO_2$ content during incubation of substrate was highest in periods between 8 week and 14 week after inoculation of shiitake when substrate was changed color into brown. $C_2H_4$ content in vessel with substrates was highest at 8mm diameter cotton plug and it was increased by order of 12, 16, 20, 0, 4 mm diameter cotton plug during substrate incubation. Sawdust substrate was soaked in cold water for different time to identify soaking effect of sawdust substrate on fruit body yield and activities of enzymes in these substrates were investigated. The fruit body yield was increased up to 40% by soaking substrates in comparison with unsoaked substrates. The soaked substrates showed 165, 175g/1,000ml at treatment of 4 and 15 hours, respectively. Cellulose activities in soaked substrates were not changed with soaking time, but activities of laccase, lignin degradation enzyme, were drastically increased up to 4 times in comparison with unsoaked substrates.

• Journal of Korean Society of Forest Science
• /
• v.79 no.2
• /
• pp.115-126
• /
• 1990

This study was performed to find differences in phototaxis response of the larva, adult emergence, sex ratio and gall formation rate of Thecodiplosis japonensis Uchida et Inouye between two areas, north and south. Larvae from these two areas, Hweng-sung in north and Moo-an in south, both considered to be the sities of severe outbreak of the insect recently, were collected from the floor and transported to the entomology larboratory, Won-Kwang University in Iri, then overwintered. These larvae were used for various experimental purposes on various dates. The following results were obtained. 1. The sizes of larvae reached 2.45 in length, 0.70 in width for north, and 2.50 in length, 0.72 in width for sourth. It seems that the differents were not significant. 2. It is known that Leaving gall of larvae to the ground for the hibernation usually occurs on rainy days. For the larvae dispersion, the phototaxis response of the larvae was hypothesized. To check this, the author manipulated some different illumination intensities adjusting the distance between the glass tube in which 100 larvae were contained and electric bulb. The glass tubes were blackened all but except a small portion. The phototaxis responses between two areas seemed to be different particularly at low light intensities, 45, 145 and 1000 lux, The larvae from north assembled to the clear portion of the glass tube were more than 30 out of 100, however less than 30 in south sample regardless of the time passage. In either cases, the saturation points came after about 8 to 10 hours. If temperature units were used, the phototaxis curve= after 1 hour illumination between two areas provided significant differences. 3. The adult emergence of south area was lagged 10 days later than that of north area. The accumulated effective day-degrees of temperature for adult emergence were $934^{\circ}C$ for north area and $1180^{\circ}C$ for south area. The emerging duration of north area appeared to be in late May through the early of July and the peak emergence occurred in middle June that was approximately 15days earlier than that of south area. The sex ratio of female to male, regardless of area, was approximately 3 : 1. 4. The rates of gall formation of the red pine(Pinus densiflora Siebold et Zuccarini), 6-year-old seedlings, were as low as 9.94% for north area and 8.87% for south area. Through the close observation, the author presumed that the population reduction was greatly affected during the prepupa stage by relative moisture content and predators, such as spiders and ants presented on the ground.

• Education of Primary School Mathematics
• /
• v.12 no.1
• /
• pp.1-20
• /
• 2009

The purposes of this study are to analyze elementary school student's intuitive thinking in the process of mathematical problem solving and to analyze elementary school student's errors of intuitive thinking in the process of mathematical problem solving. According to these purposes, the research questions can be set up as followings. (1) How is the state of illumination of the elementary school student's intuitive thinking in the process of mathematical problem solving? (2) What are origins of errors by elementary school student's intuitive thinking in the process of mathematical problem solving? In this study, Bogdan & Biklen's qualitative research method were used. The subjects in this study were 4 students who were attending the elementary school. The data in this study were 'Intuitine Thinking Test', records of observation and interview. In the interview, the discourses were recorded by sound and video recording. These were later transcribed and analyzed in detail. The findings of this study were as follows: First, If Elementary school student Knows the algorithm of problem, they rely on solving by algorithm rather than solving by intuitive thinking. Second, their problem solving ability by intuitive model are low. What is more they solve the problem by Intuitive model, their Self- Evidence is low. Third, in the process of solving the problem, intuitive thinking can complement logical thinking. Last, in the concept of probability and problem of probability, they are led into cognitive conflict cause of subjective interpretation.

• Journal of KIISE
• /
• v.41 no.9
• /
• pp.666-673
• /
• 2014

This paper proposes a scalable face recognition method for unconstrained face databases, and shows a simple experimental result. Existing face recognition research usually has focused on improving the recognition rate in a constrained environment where illumination, face alignment, facial expression, and background is controlled. Therefore, it cannot be applied in unconstrained face databases. The proposed system is face feature extraction algorithm for unconstrained face recognition. First of all, we extract the area that represent the important features(landmarks) in the face, like the eyes, nose, and mouth. Each landmark is represented by a high-dimensional LBP(Local Binary Pattern) histogram feature vector. The multi-scale LBP histogram vector corresponding to a single landmark, becomes a low-dimensional face feature vector through the feature reduction process, PCA(Principal Component Analysis) and LDA(Linear Discriminant Analysis). We use the Rank acquisition method and Precision at k(p@k) performance verification method for verifying the face recognition performance of the low-dimensional face feature by the proposed algorithm. To generate the experimental results of face recognition we used the FERET, LFW and PubFig83 database. The face recognition system using the proposed algorithm showed a better classification performance over the existing methods.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.358-373
• /
• 1997

Resin modified glass ionomers were introduced in 1988 to overcome the problems of moisture sensitivity and low early mechanical strength of conventional glass ionomers and to maintain their clinical advantages. The purpose of this study was to evaluate the color stability of four resin modified glass ionomers(Fuji II LC, Vitremer, Dyract and VariGlass), one resin composite material(Z-100), and one conventional glass ionomer(GC Fuji II) under several conditions. These conditions were as follows: 1) before curing, 2) after curing, 3) after polishing, 4) after 500 thermocycling, 5) after 1,000 thermocycling, 6) after 1,500 thermocycling and 7) after 2,000 thermocycling. Three specimens of each material/shade combination were made. Materials were condensed into metal mold with a diameter of 10 mm and a thickness of 2.0 mm, and were pressed between glass plates. The material was polymerized using a light polymerizing unit(Visilux II, 3M, USA). After removal of excess, the surface was polished sequentially on wet sandpapers. A reflection spectrophotometer(Model TC-6FX, Tokyo Denshoku Co., Japan) was used to determine CIELAB coordinates($L^*,a^*$ and $b^*$) of each specimen. CIE standard illumination C was used as the light source. The results were as follows : 1. In comparing different shades of same material, CIELAB color difference(${\Delta}E^*$) value was not significantly different from each other(p>0.05). 2. CIELAB color difference(${\Delta}E^*$) values between after-curing and after-polishing were ranged from 5.53 to 27.08. These values were higher than those of other condition combinations. 3. CIELAB color difference(${\Delta}E^*$) values between before-thermocycling and after-thermocycling were ranged from 1.40 to 7.81. Despite the number of thermocycling increased, CIELAB color difference(${\Delta}E^*$) value was low. 4. The color stability of resin modified glass ionomers was more stable than that of conventional glass ionomers but less stable than that of Z100.

• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.239-247
• /
• 2005

In this study, we have used newly developed dual-beam shearography which is based on laser speckle that includes various information about an object. Among the several shearing techniques, we used Michelson shearing interference technique which is the most powerful. Acrylate plate was used as a sample, which has inner defects and low thermal conductivity. Michelson shearing interferometer was used for obtaining speckle fringes. We also used phase shifting technique to get a phase map. Using single beam illumination, we could obtain mixture of deformation components of both in-plane and out-of-plane. In order to separate the two components, we have used dual-beam shearography technique. We have obtained a speckle pattern of both before and after deformation. Through LS filtering and unwrapping processes, we could find a position and a shape of the inner defects easily. Deformation of the acrylate plate due to thermal heating has occurred mainly in z-direction(out-of-plane) because it has low thermal conductivity. The acrylate plate was deformed only at the restricted area where the electrical heat applied.

• Journal of Digital Convergence
• /
• v.14 no.5
• /
• pp.325-331
• /
• 2016

In driving at evening or night, we are not able to recognize the speed bump and so stop suddenly. It could result in accidents. And also, we have a restriction of street light installation in farm road because it could be harmful to the crops and driver could not recognize the walking people. It needs to develop the speed bump with light and streetlight to be non harmful to the crops. So, we develop both the speed bump and streetlight with LED which could be non harmful to the crops and be increased recognition of walking people in farm road. For LED lighting power, we use the solar cells, and piezoelectric elements. It has automatic on/off according to power saving rates without illumination sensor. Minimization of circuit elements and design of minimum resisters and low power LED was used for power saving in assuring 3-days.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.87-87
• /
• 2010

Photoelectrochemical (PEC) systems are promising methods of producing H2 gas using solar energy in an aqueous solution. The photoelectrochemical properties of numerous metal oxides have been studied. Among them, the PEC systems based on TiO2 have been extensively studied. However, the drawback of a PEC system with TiO2 is that only ultraviolet (UV) light can be absorbed because of its large band gap (3.2 - 3.4 eV). Two approaches have been introduced in order to use PEC cells in the visible light region. The first method includes doping impurities, such as nitrogen, into TiO2, and this technique has been extensively studied in an attempt to narrow the band gap. In comparison, research on the second method, which includes visible light water splitting in molecular photosystems, has been slow. Mallouk et al. recently developed electrochemical water-splitting cells using the Ru(II) complex as the visible light photosensitizer. the dye-sensitized PEC cell consisted of a dye-sensitized TiO2 layer, a Pt counter electrode, and an aqueous solution between them. Under a visible light (< 3 eV) illumination, only the dye molecule absorbed the light and became excited because TiO2 had the wide band gap. The light absorption of the dye was followed by the transfer of an electron from the excited state (S*) of the dye to the conduction band (CB) of TiO2 and its subsequent transfer to the transparent conducting oxide (TCO). The electrons moved through the wire to the Pt, where the water reduction (or H2 evolution) occurred. The oxidized dye molecules caused the water oxidation because their HOMO level was below the H2O/O2 level. Organic dyes have been developed as metal-free alternatives to the Ru(II) complexes because of their tunable optical and electronic properties and low-cost manufacturing. Recently, organic dye molecules containing multi-branched, multi-anchoring groups have received a great deal of interest. In this work, tri-branched tri-anchoring organic dyes (Dye 2) were designed and applied to visible light water-splitting cells based on dye-sensitized TiO2 electrodes. Dye 2 had a molecular structure containing one donor (D) and three acceptor (A) groups, and each ended with an anchoring functionality. In comparison, mono-anchoring dyes (Dye 1) were also synthesized. The PEC response of the Dye 2-sensitized TiO2 film was much better than the Dye 1-sensitized or unsensitized TiO2 films.

• Journal of Life Science
• /
• v.13 no.1
• /
• pp.15-20
• /
• 2003

Seeds treated before sowing should be dried for their quality control on their sale or storage. The experiments were done to clarify the effect of drying, temperature and light quality treated during drying and germination on germination of gourd (Lagenaria siceraria Standl.) seeds. Drying of treated seeds was done at $35^{\circ}C$. After treated seeds were dried. their germination test was done at 10, 20 and $30^{\circ}C$ on the condition of darkness, but with blue, red, far-red light and darkness as light quality treatments. FR-yongjadaemok and FR-kunghap were used as test cultivars and their daily germination rates were measured at treatment levels. Its presowing hydrated seeds were dried 10 hours at $35^{\circ}C$ until reached below their original moisture content, and germination rate between the above dried seeds and the conventional dry-heated ones was not significantly different. At $30^{\circ}C$ germination temperature, the treated seeds showed higher initial germination rate when dried under red light illumination than under darkness although their germination rates were nearly same at each temperature of 10 and $20^{\circ}C$ being relatively low. Effect of the red light treatment during their drying continued to more than 3 months. Germination rate of the red light treated seeds during drying was reduced by far-red light treated during their germination. The initial rate to the second day after sowing were higher under red light and darkness treated during germination than under the two other lights.