• Journal of Convergence Society for SMB
• /
• v.6 no.4
• /
• pp.25-30
• /
• 2016

This paper presents on the development of a compact anti-lost device requested recently. The proposed device consists of the master and slave modules based on Bluetooth4.1 technology. To implement a low-power characteristic, an algorithm has been also developed. The transmitting and receiving circuits are designed by using BoT CLE110 module supporting Bluetooth 4.1. The ATmega 328P-AU was used for the control and LP3874EMP was used as a linear regulator. Power consumption of the fabricated product in operating mode is only 10mAh and 35mAh for MCU operating state. Alarm operation distance is $10m{\pm}30%$, the effective radiated power is less than 10mW, the frequency band is designed to operate in the Bluetooth band with 26MHz bandwidth. And algorithms have been developed to extend the battery life. The size of the product was obtained as $45{\times}45{\times}15mm$ for master and $35{\times}35{\times}10mm$ fr slave. After the optimization process, it is expected to be commercialized as a wristwatch for anti-lost device.

• Journal of Preventive Medicine and Public Health
• /
• v.34 no.3
• /
• pp.191-199
• /
• 2001

Objective : In this study, we focused on estimating the burden of premature death in Korea caused by smoking using the YLL(years of life lost due to premature death) measurement. Methods : First, we determined parameters: such as age-specific standard life expectancy, age on death, sex, and cause of death by analyzing the national death certificate data and life table collected during 1997. These were provided by the National Statistical Office. Secondly, we estimated the age group- specific years of life lost due to premature death by employing the standard expected years of life lost(SEYLL) measurement. Thirdly, the burden of premature death caused by smoking was estimated using the YLLs measurement which was developed by the global burden of disease study group. Fourthly, We calculated the risk related to smoking using the population attributable risk. Results : The following results were obtained in this study: 1) Premature death that is attributable to smoking in males could be prevented in 60.9%(513,582 person-year) by non-smoking. 2) The burden of premature death by smoking for female was prevented to 17.7%(513,582 person-year) by non-smoking. Conclusion : We found that the YLL method employed in this study was appropriate in quantifying the burden of premature death. This provides a rational basis for planning a national health policy regarding premature deaths caused by smoking and other related risk factors.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.2
• /
• pp.186-195
• /
• 1998

The objective of this study was to determine if MWF(metalworking fluids) mass sampled on PVC filter lose during flowing airstream and desiccating and to present direction to correct the underestimated MWF mass. Flowing airstream caused MWF sampled on PVC filter to be breakthrough and lost. Loss of MWF on PVC filter increased in proportion to time of flowing airstream. Meanwhile, loss of MWF was observed during desiccating without flowing airstream. Vapor pressure of MWF is so low that it would not normally be thought to evaporate. However, MWF mist sampled on PVC filter has so great a surface area that loss by flowing airstream and evaporation can be appreciable. Loss between fresh and used MWF was also different. Those study results mean that NIOSH method(#0500 method) to take airborne MWF mist with PVC filter is not valid. Media to sample airborne MWF accurately still have not been introduced. It seems to be needed to estimate how much MWF on PVC filter may be lost during sampling. Regression model between sampling time including 1 day desiccating and total loss of MWF was "Total loss(%)=18.4%+0.06 sampling time(p=0.000, r2=49.6%)". This model help correct MWF lost when one measures airborne MWF using NIOSH # 0500 method.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.23
• /
• pp.10313-10317
• /
• 2015

Background: The purpose of the article was to analyze the years of potential life lost (YPLL) of women who died from breast and cervical cancer in the State of Paran$\acute{a}$, Southern Brazil. This was a temporal trend study (2000 to 2010) about the coefficients of mortality and the years of potential life lost in women aged 20 to 70 years. Materials and Methods: Data were obtained through the database of the Department of the Unified Health System (DATASUS) and the National Mortality Information System. Results: There was a loss of 125.075 YPLL due to breast cancer, with an average of 11.370 YPLL. Regarding cervical cancer, the figure obtained was 91.625 YPLL from 2000 to 2010, with an average of 8.329 YPLL. Increased risk of death from breast cancer was observed for women aged 50 to 59 years, with a significant increase among those in the age group from 40 to 49 years. There was an increased rate of cervical cancer among women 40 to 69 years. Conclusions: The risk of death grows with increasing age, being higher from 40 years. Prevention is paramount for both cancers. Thus, preventive measures are required and a reassessment of political strategies should be adopted.

• Journal of KIISE:Information Networking
• /
• v.32 no.3
• /
• pp.382-390
• /
• 2005

As today's networks evolve towards an If-based integrated network, the role of transmission control protocol(TCP) has been increasing as well. As a well-known issue, the performance of TCP is affected by its loss recovery mechanism that is comprised of two algorithms; fast retransmit and fast recovery. Although retransmission timeout(RTO) caused by multiple packet losses can be avoided by using selective acknowledgement(SACK) option, RTO cannot be avoided if a retransmitted packet is lost. Therefore, we propose a simple modification to make it possible for a TCP sender using SACK option to detect a lost retransmission. In order to evaluate the proposed algorithm, simulations have been performed for two scenarios where packet losses are random and correlated. Simulation results show that the proposed algorithm can improve TCP performance significantly.

• The Journal of the Korea Contents Association
• /
• v.12 no.7
• /
• pp.21-28
• /
• 2012

The data centric storage (DCS) scheme is one of representative methods to efficiently store and maintain data generated in wireless sensor networks. In the DCS schemes, each node has the specified data range for storing data. This feature is highly vulnerable to the faults of nodes. In this paper, we propose a new recovery scheme for the lost data caused by the faults of nodes in DCS environments. The proposed scheme improves the accuracy of query results by recovering the lost data using the spatial continuity of physical data. To show the superiority of our proposed scheme, we simulate it in the DCS environments with the faults of nodes. In the result, our proposed scheme improves the accuracy by about 28% through about 2.5% additional energy consumption over the existing scheme.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.5
• /
• pp.628-636
• /
• 2012

Raw-starch-digesting enzyme (RSDA) was immobilized on Amberlite beads by conjugation of glutaraldehyde/polyglutaraldehyde (PG)-activated beads or by crosslinking. The effect of immobilization on enzyme stability and catalytic efficiency was evaluated. Immobilization conditions greatly influenced the immobilization efficiency. Optimum pH values shifted from pH 5 to 6 for spontaneous crosslinking and sequential crosslinking, to pH 6-8 for RSDA covalently attached on polyglutaraldehyde-activated Amberlite beads, and to pH 7 for RSDA on glutaraldehyde-activated Amberlite. RSDA on glutaraldehyde-activated Amberlite beads had no loss of activity after 2 h storage at pH 9; enzyme on PG-activated beads lost 9%, whereas soluble enzyme lost 65% of its initial activity. Soluble enzyme lost 50% initial activity after 3 h incubation at $60^{\circ}C$, whereas glutaraldehyde-activated derivative lost only 7.7% initial activity. RSDA derivatives retained over 90% activity after 10 batch reuse at $40^{\circ}C$. The apparent $K_m$ of the enzyme reduced from 0.35 mg/ml to 0.32 mg/ml for RSDA on glutaraldehyde-activated RSDA but increased to 0.42 mg/ml for the PG-activated RSDA derivative. Covalent immobilization on glutaraldehyde Amberlite beads was most stable and promises to address the instability and contamination issues that impede the industrial use of RSDAs. Moreover, the cheap, porous, and non-toxic nature of Amberlite, ease of immobilization, and high yield make it more interesting for the immobilization of this enzyme.

• ETRI Journal
• /
• v.38 no.6
• /
• pp.1064-1073
• /
• 2016

An adaptive speech streaming method to improve the perceived speech quality of a software-based multipoint control unit (SW-based MCU) over IP networks is proposed. First, the proposed method predicts whether the speech packet to be transmitted is lost. To this end, the proposed method learns the pattern of packet losses in the IP network, and then predicts the loss of the packet to be transmitted over that IP network. The proposed method classifies the speech signal into different classes of silence, unvoiced, speech onset, or voiced frame. Based on the results of packet loss prediction and speech classification, the proposed method determines the proper amount and bitrate of redundant speech data (RSD) that are sent with primary speech data (PSD) in order to assist the speech decoder to restore the speech signals of lost packets. Specifically, when a packet is predicted to be lost, the amount and bitrate of the RSD must be increased through a reduction in the bitrate of the PSD. The effectiveness of the proposed method for learning the packet loss pattern and assigning a different speech coding rate is then demonstrated using a support vector machine and adaptive multirate-narrowband, respectively. The results show that as compared with conventional methods that restore lost speech signals, the proposed method remarkably improves the perceived speech quality of an SW-based MCU under various packet loss conditions in an IP network.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.3
• /
• pp.8-13
• /
• 2015

One of the most usual indicators to measure the performance of any inventory policy is the mean physical stock. In general, when estimating the mean physical stock in periodic review inventory systems, approximate approaches are often utilized by practitioners and researchers. The mean physical stock is generally calculated by a simple approximation. Still these simple methods are frequently used to analyze various single stockpoint and multi-echelon inventory systems. However, such a simple approximation can be very inaccurate. This is particularly true for low service levels. Even though exact methods to calculate the mean physical stock have been derived, they are available for specific cases only and computationally not very efficient, and therefore less useful in practice. In literature, approximate approaches, such as the simple, the linear, and Simpson approximations, were derived for the periodic review inventory systems that allow backorders. This paper modifies the approximate approaches for the lost sales case and evaluates the modified approximate approaches. Through computational experiments, average (and maximum) percentage deviations of mean physical stock between the exact method and the modified approximations are compared in the periodic review inventory system with lost sales. The same comparison between the modified and the original approximations are also conducted, in order to examine the performance of modified approximations. The results show that all modified approximations perform well for high service levels, but also that the performance may deteriorate fast with decreasing service level. The modified Simpson approximation is clearly better. In addition, the comparison between the modified and the original approximations in the periodic review inventory system with lost sales shows that the modified approximation outperforms the original approximation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.4B
• /
• pp.288-297
• /
• 2003

The fast retransmit and fast recovery algorithm of TCP Reno, when multiple packets in the same window are lost, cannot recover them without RTO (Retransmission Timeout). TCP New-Reno can recover multiple lost packets by extending fast recovery using partial acknowledgement. If the retransmitted packet is lost again during fast recovery, however, RTO cannot be avoided. In this paper, we propose an algorithm called "Duplicate Acknowledgement Counting(DAC)" to alleviate this problem. DAC can detect the retransmitted packet loss by counting duplicate ACKs. Conditions that a lost packet can be recovered by loss recovery of TCP Reno, TCP New-Reno and TCP New-Reno using DAC are derived by modeling loss recovery behavior of each TCP. We calculate the loss recovery probability for random packet loss probability numerically, and show that DAC can improve loss recovery behavior of TCP New-Reno.