• Journal of Community Nutrition
• /
• v.4 no.2
• /
• pp.99-108
• /
• 2002

Recently interests on raw-food diets are rapidly increasing in relation to chronic diseases prevention in Korea, but studies on raw-food diets have been hardly performed by nutritionists. This study was performed to investigate the effects of low-calorie diets using a raw-food formula in the form of freeze-dried powder on obesity and its complications in the obese women (body mass index (BMI) $\geq$ 25kg/㎡) for eight weeks. Forty premenopausal women (mean BMI 28.04kg/㎡, mean age 28.33years old) participated in this diet intervention, and were controlled by eating 1 regular meal, 1-2 snacks and 2 raw-food formula (140kcal/pack) meals a day within the 1500-1300kcal ranges. Anthropo-mentric measurements, body compositions, physical exercise, and obesity-related risk factors were assessed before (the initial), during (the 4th week) and after (the 8th week) the study. All the data was analyzed by paired t-test, repeated measures ANOVA, and nonparametric rank test at p<0.05 level. Obesity was significantly increased during this study, and it was decreased in weight (-4.59%, p<0.000), BMI (-4.56%, p<0.000), body fat percent (-6.18%, p<0.000), fat mass (-10.19%, p<0.000), waist and hip circumferences(-5.69%, p<0.000 and -2.55%, p<0.000) and WHR (-3.24%, p<0.000). Energy expenditure of physical exercise was increased as much as 70kca1/day during the study (p=0.000), but it did not have any correlations with weight loss and changes of body compositions. Biochemical measurements including blood triglyceride(p <0.006) and leptin(p<0.000) levels were significantly decreased, LDL cholesterol level was increased(p<0.05), but all the blood lipid levels were in the normal ranges. Fatty liver echogenicity and menstrual irregularity were improved after the diet intervention(p<0.000 and p<0.034). In conclusion, this B-week low-calorie diet intervention using raw-food formula was effective for obese premenopausal women in reducing obesity and its risk factors so as not to proceed towards comorbidities. However, the variation of blood lipid levels should be observed for a longer Period.

• Journal of Society of Preventive Korean Medicine
• /
• v.19 no.1
• /
• pp.117-130
• /
• 2015

Objective : This study was designed to investigate the effects of non fermented Zizyphus. jujuba mixture (mixed fruit and leaf : ZM) and fermented Z. jujuba mixture(FZM) on fed high-fat diet induced hyperlipidemic rats for development medicinal food. Method : The extracts prepared for Zizyphus. jujuba mixture(ZM) and fermented Z. jujuba mixture(FZM) with Lactobacillus plantarum and Saccharomyces cerevisiae. Experimental group was divided into normal control group(NC group) and high fat diet groups. The high fat diet groups fed high fat diet 2 weeks after was sub-divided into high fat diet control group(HC group), high fat diet positive control group(HPC group), non fermented Z. jujuba mixture extract group(ZM group) and fermented Z. jujuba mixture extract group(FZM group). NC and HC group was orally administerd of 0.9% saline, HPC group administerd lovastatin diluted in 0.9% saline at a dose of 10 mg/kg BW, ZM and FZM groups was administerd each extracts diluted in 0.9% saline at a dose of 300 mg/kg BW once a day on a fixed time for 4 weeks. In the present study we measured organ weight, epididymal fat tissue weight, concentration of serum lipids, hepatic lipids, MDA contents in liver tissue and metabolic variables in serum. Results : ZM and FZM suppressed testis weight loss and FZM decreased epididymal fat tissue weight to level of NC group in high-fat diets. ZM and FZM did not influence on serum cholesterol level, but prominently decreased serum triglyceride concentration compared with HC group, and FZM diminished hepatic triglyceride same as serum. ZM and FZM did not impair liver and kidney function and influence positive effects through by suppression of elevation lipid level. Conclusion : These results suggested that Z. jujuba mixture(ZM, FZM) should be useful developing medicinal food for prevention and improvement of hyperlipidemia and FZM is more suitable agent than ZM.

• Journal of the Korean Institute of Navigation
• /
• v.17 no.3
• /
• pp.57-68
• /
• 1993

The economy of Korea has grown up significantly in its scale. It has, therefore, become imperative to develop countermeasures to prevent work related injuries and occupational illnesses resultining from haza-rdous working conditions and handling harmful substances. A lot of cargo handling accident in port have occurred due to the characteristics of poor working environment, diversity of working place and method, fluctuation of the amount of cargo and handling of heavy, long, harmful and dangerous cargo, etc. According to '91 industrial accident analysis carried out by the ministry of labour, the number of the stevedores injured by cargo handling accident in port were 1, 432 persons (the death accident : 22 per-sons), the amount of industrial accident compensation in port was 6.7 billion won (the amount of economic loss : 33.6 billion won), and the injury occurance rate of the stevedoring industry was higher than that of the whole industry. This paper, therefore, aims to the actual status of the stevedoring industry and to extract the main cau-ses of the accidents related to cargo handling in port through factor analysis using the data of the accide-nts in the whole habour from 1990 to 1992, and to suggest the countermeasures to prevent such accident. The main causes of the accident and countermeasures are found to be as follows through the factor analy-sis : Factor1, factor2, and factor3 related to a defect of human being and management, a defect of state and environment, and an insufficiency of education and law are extracted. The short-term countermeasures to prevent these accidents are 1) to consolidate the safety and health organization in the working spot, 2) to secure a safe condition in working spot before dock work, 3) to strengthen a dock worker's safety educa-tion. The long-term countermeasures are 1) to promote a decasualisation of dock workers, 2) to modernize the cargo working methods through constructing exclusive pier and introducing exclusive cargo handling equipment, 3) to establish a exclusive dock accident prevention organization and the dock workers law. Factor 4, factor5, factor6, and factor7 related to an unfitness, a deficiency of technical knowledge, a nonfu-lfilment of safety measures, and a bad arrangement are extracted. The countermeasures to prevent these accidents are 1) to perform a complete safety inspection of cargo handling equipments and tools and to carry out the dock work according to a working plan, 2) to publish and supply technical safety books, safety instruction book, safety check list, etc., 3) to strengthen the safety patrol at the working spot in habour and to activate a safety fund, 4) to maintain always a clean workshop with the safety consciousness in which the good arragement of the working spot is considered to be the beginning of safety.

• Journal of Navigation and Port Research
• /
• v.37 no.1
• /
• pp.113-121
• /
• 2013

IMO(International Maritime Organization) is existed the movement for revising ISM Code so that the maintenance history and the trouble information given trading in a ship can be transferred. An empirical analysis was made on the influence that will have upon shipping industry through surveying on the recognition on ISM Code revision in employees of the relevant field and on the expected problems given being amended ISM Code as the above. In conclusion, the positive effect is judged to be more in the aspect of ship safety, which is the aim of ISM Code, rather than the negative effect, which may take place given being revised ISM Code. In other words, the clean market can be formed through this because fairness is maintained on both sides given trading in a ship by which opening the maintenance record and the trouble history is applied equally to a buyer and a seller. Ships can be reduced a loss of time and cost in preventing similar problems and seeking solution that may appear in important equipments, through this maintenance record. Also, based on these materials, it comes to be available for analyzing a risk of ship and preventing and managing a risk, thereby being increased ability of maintenance and repair in a ship, resulting in being judged to likely contributing to ship safety and environmental-pollution prevention.

• The korean journal of orthodontics
• /
• v.26 no.4
• /
• pp.341-348
• /
• 1996

The efficiency of maxillary canine retraction by means of sliding mechanics along an 0.016 continuous labial arch and an 0.009 inch in diameter with a lumen of 0.030 inch NiTi closed coil spring was compared with that using the same NiTi closed coil spring and Molar Anchoring Spring(MAS) which was designed by author. MAS was made of .017" X .025" TMA wire and was given 60 degree tip-back bend on the wire close to the molar tube. This study was designed to investigate molar and canine root control during retraction into an extraction site with continuous arch wire system. Two techniques were tested with a continuous arch model embedded in a photoelastic resin. A photoelastic model was employed to visualize the effects of forces applied to canine and molar by two retraction mechanics. With the aid of polarized light, stresses were viewed as colored fringes. The photoelastic overview of the upper right quadrant showed that stress concentrations were observed in its photoelastic model. The obtained results were as follows. 1. Higher concentration of compression can be seen clearly at the distal curvature of the canine and mesial curvature of the molar and premolar when NiTi closed coil spring was applied only, which means severe anchorage loss of the molar and uncontrolled tipping of the canine. 2. The least level compression was presented at the mesial root area of the molar and premolar, and mesial root area of the canine when NiTi closed coil spring and MAS were used simultaneously. Especially mesial alveolar crest region of the canine was shown moderate level of compression that means MAS can be used as a appliance for anchorage control and prevention of canine extrusion and uncontrolled tipping during canine retraction.

• Korean Security Journal
• /
• no.48
• /
• pp.79-111
• /
• 2016

This study aims at analyzing the global trend of standardization in the field of Industrial Security through ISO/TC 292. It covers broad areas from risk management for industrial property protection and loss prevention through supply chain security, product and document fraud and counterfeiting countermeasures and control and community resilience. It also explores the historical background of the standardization in the security field, how ISO TC 292 came out as a leading group in order to standardize relevant security management systems. TC 292 deals with terminology, general security-related standards and supply chain security management. One of the major findings from this analysis is that security targets and threats are diversified and so organizations like enterprises should have proper flexibility to adapt themselves to new security environment and take appropriate resilience system to cope with the threats and incidents. Also the ISO standardization requires public or private entities to take holistic approaches in security management. Finally, it was found that South Korea has to prepare for this global trend of standardization in this field so that ISO certification market demand and the requirements for transnational trades can be well met.

• Journal of the Society of Disaster Information
• /
• v.16 no.2
• /
• pp.267-275
• /
• 2020

Purpose: In this study, GPR exploration equipment, spray vehicles and flow meters, core drill, borehole image processing system(BIPS), 3D cavity imagery equipment, and cavity formatting equipment were used to identify this cavity growth process. Method: A certain amount of water was injected in proportion to the mass of the cavity, and the cavity was observed to expand as the injected water was drained out. The cavity rating change was evaluated by quantitatively evaluating the expansion factors and the speed of growth. Results: According to the results of examining the volume change through injection time - injection flow rate - volume increase for the four experimenters, the volume increase decreased as the injection time increased, and there was no further increase in volume if injected for one hour or so. Conclusion: In addition, the injection test analyzed the volumetric variation to determine whether the cause of the cavity occurrence was the effect of the underground burial in the vicinity of the cavity. Therefore, it was found that the cavity expansion is caused by the repetition of the relaxation soil collapse due to the groundwater flow and the loss of the collapsed soil below the cavity.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.4
• /
• pp.79-86
• /
• 2015

Korean territories has formed about 70% of mountainous areas that have acidified serious level to average pH 4-5. There are a number of abandoned metal mines about 1,000 in Korea. However, mine tailings and waste rock included heavy metals are exposed to long-term environment without prevention facility or treatment system. Thus, ongoing management and monitoring of soil environment are required. Most of abandoned mine scattered in forest areas of slopes. Soil erosion due to continuous rainfall in the slopy areas can cause the secondary pollution by the influence eutrophication of water system and the productivity loss of the plant. Therefore, this study would like to estimate pH leaching rate by artificial rainfall using waste neutralization-agent in lysimeter. Moreover, the potentially of secondary pollution related to precipitation is figured out through the experiments, and the optimal planting methods would examinate after neutralizing treatment in soil. Experiments composed three kinds of lysimeter; lysimeter 1 had filled only acidic soil, lysimeter 2 had neutralized soil, and lysimeter 3 had planting plants after neutralized soil. In the results, lysimeter 2 showed the lowest pH leaching, and there is not specific relativity with pH leaching of the seasonal characteristics.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.2
• /
• pp.71-79
• /
• 2015

This paper describes vegetation based soil-media hydroseeding measures that have been previously applied as slope revegetation methods show problems such as insufficient binding force, drying, and insufficient organic matter. In particular, in the case of slope faces in regions where scattering is severe, a vicious circle exists in which remarkably low vegetation cover rates and increases in withering rates over time lead to further decreases in vegetation cover rates, which lead to further increases in erosion and scattering. Therefore, in the present study, environment friendly soil stabilizers were applied for resistance against erosion or scattering and engineering evaluations such as long-term immersion tests and flow resistance tests were conducted to determine appropriate mixing ratios. According to the results of long-term immersion tests utilizing environment friendly soil stabilizers and existing greening soil based materials, 100% collapse occurred at 30 hours and 40 days in the case of soil stabilizer mixing ratios of 0% and 2%, respectively. While the original form of the samples remained intact until the experiment was completed in the case of mixing ratios exceeding 4% indicating that 2% or higher soil stabilizer mixing ratios could affect the maintenance of forms even under extreme conditions. In addition, artificial rainfall tests were conducted on 40, 45, and 55 degree slope faces to evaluate the structural stability of vegetation based materials. Flow resistance tests were conducted on soil stabilizer mixing ratios of 0, 4, 8% to evaluate erosion resistance capability. Based on the results of the tests, environment friendly soil stabilizers applied for prevention of scattering or resistance against erosion by rainwater are considered to provide large effects to reduce losses and loss rates showed a tendency of decreasing rapidly when soil stabilizers were mixed.

• Applied Chemistry for Engineering
• /
• v.27 no.1
• /
• pp.39-44
• /
• 2016

This study was to investigate the characteristics of combustion toxic gases of pinus rigida specimens treated with chemical additives such as pyrophosphoric acid (PP)/ammonuium ion ($NH_4{^+}$), methylenepiperazinomethyl-bis-phosphonic acid (PIPEABP) and $PIPEABP/NH_4{^+}$. Each pinus rigida plates was painted in three times with 15 wt% of each chemical additives in the aqueous solution. After drying these specimens at room temperature, the production of combustion gases and smoke was examined by the cone calorimeter (ISO 5660-1). As a result, the peak mass loss rate time (PMLR time) treated with chemicals was delayed upto 10.5~47.4% compared to that of using untreated specimen. In addition, the peak production of carbon monoxide ($CO\;_{peak}$) of 32.1~71.4% and total smoke release rate (TSRR) of 15.6~43.6% for test pieces treated with the chemical additive were higher than that of using the virgin plate. In particular, for the specimens treated with the chemical additive, the rate of smoke release (RSR) 29.4~41.5% was obtained higher than that of untreated plate except the specimen treated with $PP/4NH_4{^+}$. It can thus be concluded that the treatment using the chemical additive could partially increase the combustion-retardation properties of the species when compared to those of the virgin plate.