• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.6
• /
• pp.17-29
• /
• 2021

Recently, as social distancing have been raised due to the re-spread of COVID-19, the number of serial entrepreneurs who are closing their business is rapidly increasing. Learning from failure is a source of success, but business failure can result in psychological and economic losses and negative emotions of the serial entrepreneur. At this point, it is very important to find a way to recover the negative emotions caused by business failures of serial entrepreneurs. Recently, a strategic model has emerged to deal with the negative emotions of grief caused by business failures of serial entrepreneurs. This study identified the recovery factors from the grief of business failures of serial entrepreneurs and analyzed Shepherd's(2003) three areas: loss orientation, restoration orientation, and dual process. To this end, individual in-depth interviews were conducted with 12 small business serial entrepreneurs who challenged re-startup to identify the attributes of recovery factors that were not identified with quantitative data. As a result of the study, first, recovery factors were investigated in three areas: individual orientation, family orientation, and network orientation. It was found to help improve recovery in nine categories: self-esteem, persistence, personal competence, hobbies, self-confidence, family support, networks, religion, and social support. Second, recovery obstacle factors were investigated in three areas: psychological, economic, and environmental factors. Nine categories including family, health, social network, business partner, competitor, partner, fund, external environment, and government policy were found to persist negative emotions. Third, the emotional processing process for grief was investigated in three areas: loss orientation, restoration orientation, and dual process. Ten categories such as family, partner support, social member support, government support, hobbies, networks, change of business field, moving, third-party perspective, and meditation were confirmed to enhance rapid recovery in the emotional processing process for grief. The implications of this study are as follows. The process of recovering from the grief caused by business failures of serial entrepreneurs was attempted by a qualitative study. By extending the theory of Shepherd(2003), This study can be applied to help with recovery research. In addition, conceptual models and propositions for future empirical research were presented, which can be discussed in carious academic ways.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1240-1242
• /
• 2005

In this study, we estimate the transport current loss of Bi-2223/Ag tapes with non-uniform current distribution. The conductor was consisted of three Bi-2223/Ag tapes and the each tapes were attached in parallel. The loss of conductor was investigated both numerical and experimental methods. The numerical code to predict ac loss was developed, and finite element method was introduced. It contained intrinsic properties of superconducting tape, which was obtained from nonlinear current voltage relation with external magnetic field and its orientation. Two results were compared and discussed. They showed good agreements with each other.

• Asia Marketing Journal
• /
• v.10 no.1
• /
• pp.65-94
• /
• 2008

This study examines the generalizability of the existing research in an on-line auction situation which suggests that there exist a gap between buyer's willing-to-pay price(WTP) and seller's willing-to-sell price(WTS) about the same product due to the endowment effect and consumers' loss aversion propensity. At the same time, this study also identifies and examines the potential moderating factors for the effect such as product type and consumer's goal orientation based on existing theories about consumers' gain-loss heuristics. The results show that WTS is consistently higher than WTP, and that such gap gets more pronounced when the target product is hedonic vs. utilitarian and when consumers have prevention goals vs. promotion goals. Lastly, limitations and managerial implications of this study is discussed.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.6 no.5
• /
• pp.27-37
• /
• 1992

We studied the dielectric and dynamic mechanical losses according to the quenching condition in low density polyethylene being used to power cables. According to severe quenching condition, characteristics of the temperature in internal friction los peak have decreased the magnitude of loss peak as amorphous region lengthen. From now on, the frequency dependent characteristics of dielectric loss have investigated at room temperature, and the dielectric loss peak due to interface polarization, between crystal and amorphous region, occurs about 30[Hz], and that, the peak due to orientation polarization in correspondence to the loss peak in internal friction has observed at about 3 [MHz]. As quenching velocity increased, the effect on quenching condition about the dielectric loss has decreased the magnitude of the loss peak. Thus, estimation has been carried out on the activation energies nd the degree of crystallinity by means of X-ray diffraction are obtained as follows: room quenching : 26.4 [kal/mole] and 54.73 [%], ice quenching : 25.6 [kcal/mole] and 48.47 [%], liquid nitrogen quenching specimens : 22.56 [kcal/mole] and 40.95 [%].

• Journal of the Korean Ceramic Society
• /
• v.40 no.6
• /
• pp.547-552
• /
• 2003

ZnO thin films on glass substrate were deposited by RF magnetron reactive sputtering at 100 W, 1.33 Pa, Ar/O2=50 : 50, 200$^{\circ}C$, and a target/substrate distance of 4 cm. Crystallinities, surface morphologies, chemical compositions, and electrical properties of the films were investigated by XRD, SEM, AFM, RBS, and electrometer. All films showed a strong preferred c-axis orientation and the chemical stoichiometry. The propagation velocity of ZnO/IDT/glass of single electrode and double electrode types SAW filter was about 2,589 m/sec, 2,533 m/sec and insertion loss was a minimum value of about -11 dB and -21 dB, respectively.

• Composites Research
• /
• v.16 no.5
• /
• pp.39-44
• /
• 2003

Embedding viscoelastic-damping materials into composites can greatly increase the damping properties of composite structures. Usually viscoelastic-damping materials behave isotropically so that their damping properties are the same in all directions. In these days, there is a desire to develop viscoelastic-damping materials that behave orthotropically so that damping properties vary with material orientation. These orthotropic damping materials can be made by embedding rows of thin wires within the viscoelastic materials. These wires add significant directional stiffness to the damping materials. where the stiffness variation with wire orientation follows classical lamination theory. In this paper, the loss factor of composite laminate was evaluated based on Ni and Adams' theory. To investigate the effect of directional damping material, the low-velociy impact response analysis was also performed. The present analysis results show that directional damping material has a great influence on vibration and damping characteristic of composite laminate.

• Progress in Superconductivity and Cryogenics
• /
• v.14 no.4
• /
• pp.50-53
• /
• 2012

This paper describes experimental study on GM-type pulse tube refrigerator (PTR). In a PTR, the pulse tube is only filled with working gas and there exists secondary flow due to a large temperature difference between cold-end and warm-end. The stability of secondary flow is affected by orientation of cold-head and thus, the cooling performance is deteriorated by gas mixing due to secondary flow. In this study, a single stage GM-type pulse tube refrigerator is fabricated and tested. The cooing performance of the fabricated PTR is measured as varying cold-head orientation angle and the results are used as reference data. Then, we divided interior space of pulse tube into three segments, and fixed the various size of screen mesh at interface of each segment to suppress the performance degradation due to secondary flow. For various configuration of pulse tube, no-load test and heat load test are carried out with the fixed experimental condition of charging pressure, operating frequency and orifice valve turns. From experimental results, the fine screen mesh shows the effective suppression of performance degradation for the large orientation angle, but the use of screen mesh cause the loss of cooling capacity rather than the case of no insertion into pulse tube. It should be compromised whether the use of screen mesh in consideration of the installation limitation of a GM-type pulse tube refrigerator.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.961-963
• /
• 2003

Magnetization losses of HTS depend strongly on the orientation of external magnetic field because of anisotropy characteristics. For parallel and perpendicular magnetic field, analytical models to calculate the loss are well known but there is no analytical model for magetic fields which are applied to surface of HTS with arbitrary angle. In this paper, magnetization losses are measured for various incidence angles($15^{\circ}$, $35^{\circ}$, $45^{\circ}$, $60^{\circ}$) and compared with parallel and perpendicular loss. As a result, magnetization losses in HTS are strongly affected by perpenducular magnetic field component of external magnetic field.

• Journal of the Korean Society of Safety
• /
• v.23 no.6
• /
• pp.84-90
• /
• 2008

The mass loss rate and heat release rate of puzzle mats were analysed using variable external irradiation level. Five samples of puzzle mat were tested in this study : Type A, B, C, D and E. Type A, B and C are all general grades whereas Type D and E are both Flame retardant grades. Incident heat fluxs of $25kW/m^2$, $35kW/m^2$, $50kW/m^2$ and $70kW/m^2$ were selected for these experiments. All samples were tested in the horizontal orientation and were wrapped in a single layer of aluminum foil. Each sample was nominally 20mm thick and 100mm square. The combustion heat and mass loss rate were carried out from Oxygen bomb calorimeter and mass loss calorimeter according to ISO 5660-1 respectively. Heat release rates were calculated using the equation ${\dot{Q}}=A_f{\dot{m}}"_X{\Delta}H_c=0.75A_f{\dot{m}}"{\Delta}H_c$. where $A_f$ is the horizontal burning area of the sample, $\dot{m}"$ is mass loss rate per unit area, ${\Delta}H_c$ is complete heat of combustion and 0.75 is combustion efficiency.

• The Journal of the Korea Contents Association
• /
• v.19 no.9
• /
• pp.329-337
• /
• 2019

Prevention is very important in terms of the fact that the percentage of people in their 10s and 20s experience noise-prone hearing is so serious that it can lead to serious hearing later on. This study examines the effect of the hearing loss prevention public advertisement message on the hearing loss prevention intent of the acceptor according to the type of framing(positive/negative) and self-efficacy information provision (provide information/do not provide information). The perceived risk and future time orientation as individual characteristics of individual participants were set as variables that could influence the message effect. In this paper, we propose a message expression method and effective message delivery method in the aspect of message strategy and effect of execution when promoting understanding and interest in hearing loss prevention.