• Magazine of the Korean Society of Agricultural Engineers
• /
• v.15 no.1
• /
• pp.2913-2924
• /
• 1973

This study was to investigate the drying mechanism of stratified soil by investigating 'effects of the upper soil on moisture loss of the lower soil and vice versa' and at the same time by examining how the drying progressed in the stratified soils with bare surface and with vegetated surface respectively. There were six plots of the stratified soils with bare surface($A_1- A_6$ plot) and the same other six plots($B_1- B_5$ plot), with vegetated surface(white clover). These six plots were made by permutating two kinds of soils from three kinds of soils; clay loam(CL). Sandy loam(SL). Sand(s). Each layer was leveled by saturating sufficient water. Depth of each plot was 40cm by making each layer 20cm deep and its area. $90{\times}90(cm^2)$. The cell was put at the point of the central and mid-depth of the each layer in the each plot in order to measure the soil moisture by using OHMMETER. soil moisture tester, and movement of soil water from out sides was cut off by putting the vinyl on the four sides. The results obtained were as follow; 1. Drying progressed from the surface layer to the lower layer regardless of plots. There was a tendency thet drying of the upper soil was faster than that of the lower soil and drying of the plot with vegetated surface was also faster than that of the plot with bare surface. 2. Soil moisture was recovered at approximately the field capacity or moisture equivalent by infiltration in the course of drying, when there was a rainfall. 3. Effects of soil texture of the lower soil on dryness of the upper soil in the stratified soil were explained as follows; a) When the lower soil was S and the upper, CL or SL, dryness of the upper soils overlying the lower soil of S was much faster than that overlying the lower soil of SL or CL, because sandy soil, having the small field capacity value and playing a part of the layer cutting off to some extent capillary water supply. Drying of SL was remarkably faster than that of CL in the upper soil. b) When the lower soil was SL and the upper S or CL, drying of the upper soil was the slowest because of the lower SL, having a comparatively large field capacity value. Drying of CL tended to be faster than that of S in the upper soil. c) When the lower soil was CL and the upper S or SL, drying of the upper soil was relatively fast because of the lower CL, having the largest field capacity value but the slowest capillary conductivity. Drying of SL tended to be faster than that of S in the upper soil. 4. According to a change in soil moisture content of the upper soil and the lower soil during a day there was a tendency that soil moisture contents of CL and SL in the upper soil were decreased to its minimum value but that of S increased to its maximum value, during 3 hours between 12.00 and 15.00. There was another tendency that soil moisture contents of CL, SL and S in the lower soil were all slightly decreased by temperature rising and those in a cloudy day were smaller than those in a clear day. 5. The ratio of the accumulated soil moisture consumption to the accumulated guage evaporation in the plot with vegetated surface was generally larger than that in the plot with bare surface. The ratio tended to decrease in the course of time, and also there was a tendency that it mainly depended on the texture of the upper soil at the first period and the texture of the lower soil at the last period. 6. A change in the ratio of the accumulated soil moisture consumption was larger in the lower soil of SL than in the lower soil of S. when the upper soil was CL and the lower, SL and S. The ratio showed the biggest figure among any other plots, and the ratio in the lower soil plot of CL indicated sligtly bigger than that in the lower soil plot of S, when the upper soil was SL and the lower, CL and S. The ratio showed less figure than that of two cases above mentioned, when the upper soil was S and the lower CL and SL and that in the lower soil plot of CL indicated a less ratio than that in the lower soil plot of SL. As a result of this experiments, the various soil layers wero arranged in the following order with regard to the ratio of the accumulated soil moisture consumption: SL/CL>SL/S>CL/SL>CL/S$\fallingdotseq$S/SL>S/CL.

• Journal of Intelligence and Information Systems
• /
• v.23 no.1
• /
• pp.69-93
• /
• 2017

The development of ICT has leaded the diversification and changes of supplies and demands in markets. It also caused the creations of a variety of values which are differentiated from those in the existing market. Therefore, a new-type market is created, which can include multi-value chains which are from ICT-based created markets as well as the existing markets. We defined the platform as the new-type market. In the platform, the multi-value chains can be coexisted with multi-values. In true market, when a new-type value chain entered into an existing market, it is general that it can be conflicted with the existing value chain in the market. The conflicted problem among multi-value chains in a market is caused by the sharing of limited market resources like suppliers, consumers, services or products among the value chains. In other words, if there are multi-value chains in the platform, then it is possible to have conflictions, overlapping, creations or losses of values among the value chains. To solve the problem, we introduce coexistence factors to reduce the conflictions to reach market equilibrium in the platform. In the other hand, it is possible to lead the creations of differentiated values from the existing market and to augment the total market values in the platform. In the early era of ICT development, ICT was introduced for improvement of efficiency and effectiveness of the value chains in the existing market. However, according to the changed role of ICT from the supporter to the promotor of the market, ICT became to lead the variations of the value chains and creations of various values in the markets. For instance, Uber Taxi created a new value chain with ICT-based new-type service or products with new resources like new suppliers and consumers. When Uber and Traditional Taxi services are playing at the same time in Taxi service platform, it is possible to create values or make conflictions among values between the new and old value chains. In this research, like Uber and traditional taxi services, if there are conflictions among the multi-value chains, then it is necessary to minimize the conflictions in the platform for the coexistence of multi-value chains which can create the value-added values in the platform. So, it is important to predict and discuss the possible conflicted problems between new and old value chains. The confliction should be solved to reach market equilibrium with multi-value chains in the platform. That is, we discuss the possibility of the coexistence of multi-value chains in the platform which are comprised of a variety of suppliers and customers. To do this, especially we are focusing on the healthcare markets. Nowadays healthcare markets are popularized in global market as well as domestic. Therefore, there are a lot of and a variety of healthcare services like Traditional-, Tele-, or Intelligent- healthcare services and so on. It shows that there are multi-suppliers, -consumers and -services as components of each different value chain in the same platform. The platform can be shared by different values that are created or overlapped by confliction and loss of values in the value chains. In this research, as was said, we focused on the healthcare services to show if a platform can be shared by different value chains like traditional-, tele-healthcare and intelligent-healthcare services and products. Additionally, we try to show if it is possible to increase the value of each value chain as well as the total value of the platform. As the result, it is possible to increase of each value of each value chain as well as the total value in the platform. Finally, we propose a coexistence model to overcome such problems and showed the possibility of coexistence between the value chains through experimentation.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.2
• /
• pp.4-19
• /
• 2016

Jangkei(狀啓) made to the Royal Court by Yi Sun-sin during the Japanese invasions of Korea is handed down under the names of Jangcho(狀草), Keicho(啓草), Keibon(啓本) and others depending on copying patterns of those times and later times as it was copied out by a third person. In particular, "YimjinJangcho(壬辰狀草)" which Yi drew up during his service as the director of the naval forces in Jeolla Jwasooyeong is known as the most popular Jangkei. "ChungMinKongKeicho" which has been re-located recently after loss is a national treasure level cultural property as valuable as "YimjinJangcho" and should be treated as a model of Yi Sun-sin's other Jangkeis by next generations. As of now, however it is not confirmed if it is a totally new book related to Yi Sun-sin or is supplementary to the lost Jangkei, this study decided to ascertain relevant information through a bibliographic discussion on the question. "Chungmin(忠愍)" was the title that was used after the death of Yi Sun-sin, and "ChungMinKongKeicho" was completed when Jangkei was copied in 1662. 12 books that would not be found in YimjinJangcho are included in the book and such books are also present in the Jangkei supplement which has been known lost so far. What should be especially focused on here is that the forms and contents of these (11) photographs that Japanese shot from "ChungMinKongKeicho" in 1928 turned out to be completely identical to those of the original copy. The point that Korean History Compilation Committee added the 12 books to Jangkei as referring to the book as "One Keicho(啓草) partially copied(抄寫) in separation" and that Cho Sung-do categorized the 12 books into a supplement and others can be solid proofs to make the Jangkei supplement called "ChungMinKongKeicho". In terms of "ChungMooKongKeicho", since it consists of 62 books in total, it is not reasonable to see the book as Jangkei supplement which has the extra 12 more books for itself. "ChungMooKongKeibon" in "ChungMooKongYusa" was written with a total of 16 books. In the body, Yidumun is only clearly present, and the three books in the later part are same with the original copy of "ChungMooKongKeicho". "YimjinJangcho" by Korean History Compilation Committee has been the only book in which Yidumun was observed so far but now, it is assumed that the publication date of "ChungMooKongKeibon" goes before that of the former. The counterargument to the opinion that "ChungMinKongKeicho" is the supplement to Jangkei is based on Lee Eun-sang's comment "One page of a log in the Jangkei copy supplement." At first Seol Ui-sik introduced a piece photo of the rough draft of "MoosulIlki" in a drawing form through "Nanjung Ilkicho by Yi Sun-sin" in 1953. Lee Eun-sang also added two pages of the handwritten Yilkicho in the Jangkeichobon supplement to "MoosulIlki" and for the second time, the phrase "One page of a log written during the last 10 days after the Jangkei copy supplement" and "Supplement" were used. Those views are originated from the comment "One photograph of the rough draft of "MoosulIlki"" which Seol Ui-sik introduced without knowledge of the exact source. Lee Eun-sang said, "One page of a log in the Jangkei copy supplement" because Lee mistook "ChungMooKongYusa" for a book related to Jangkei. Since it is the wrong argument different from the actual situation of the original copy, if it has to be corrected, it should be rephrased "One page of a log in ChungMooKongYusa." After all, the source of the counterargument is the mistake because there has never been the Jangkei supplement with one page of a log included. All the Jangkeis other than "YimjinJangcho" can be said as the Jangkei supplements but still, they are separated from the other Jangkeis for the extra 12 more books are present in the commonly-called Jangkei supplement. Due to that reason, the argument on how "ChungMinKongKeicho" with the 12 books added is the popular Jangkei supplement should be considered more reasonable.

• Journal of Korean Society of Forest Science
• /
• v.13 no.1
• /
• pp.67-78
• /
• 1971

The measures of contour-terracing with sod has been executed as a major measures for hillside erosion control works for a long time in Korea. It is, however, recognized that pair terracings make a new slope-face having the more steeper degree of slope between the upper and the lower terraces on hillsides and it also does not contribute for establishing the natural vegetation-cover by penetration of pioneer seeds on the slope faces or cut-faces of hillsides. The study was therefore conducted in connection with the above problems on the cut-face having slope of $40^{\circ}$ and 1.6 meter in slope length with clay soils. Plot allocation for the experiment consists of 3 kinds of 3 replica plots having each $1.6m^2$ of slope area, i. e., the control plot with direct seeding on slopes only ($T_1$), the covering plot with the straw-mats after seeding on slopes ($T_2$) and the seeding plot after covering with the straw-mats. ($T_3$). The main results obtained may be summarized as follows : 1. Effects of the straw-mat mulchings on surface soil loss control:-The total amount of soil losses from each treatments are measured as 4,651 gr from $T_1$, 163 gr. from $T_2$ and 2,891 gr. from $T_3$ treatment respectively. (Refer to table No. 2, 3 and 4). In short, it is recognized that effect of $T_2$ treatment is compared as 28.5 times than that of $T_1$ treatment and 17.7 times than that of $T_3$ treatment respectively. Effect of $T_3$ treatment compared with $T_1$ treatment is also such recognizable as 1.6 times in control of surface soil losses on a slope face. 2. Effect of the straw-mat mulchings on soil moisture content on slopes; -Average per cent of surface soil moisture content by treatments show as 21.60 at the $T_1$, 23.04 at the $T_2$ and 22.21 at the $T_3$ treatment respectively and that of subsurface soil moisture content by treatment show as 23.81 at the $T_1$, 26.16 at the $T_2$ and 24.81 at the $T_3$ treatment respectively. The variance of soil moisture content by treatments was highly significant (Refer table No. 7, 8 and 9). 3. Effect of the straw-mat mulchings on vegetation establishment;-Average numbers of germination by treatments are counted as 237 Nos. at the $T_1$, 246 Nos. at the $T_2$ and 262 Nos. at the $T_3$ treatment plots and the vegetation coverage on ground was almost same as about 90% of covers in all treatments. This effect is more or less lower than that of surface soil erosion control. 4. Regarding the effect on surface soil erosion control, the straw-mat mulchings would be effective as a new measures for control of soil erosion on erosion susceptible lands such slope-faced bare-lands as cut-fill faces, mass-movement faces and bare hillsides.

• Korean Journal of Soil Science and Fertilizer
• /
• v.5 no.2
• /
• pp.65-74
• /
• 1972

A local rice variety, Jinheung and newly bred IR667-Suwon 214 were grown in $5m^2$ concret pot with two spacings and two nitrogen levels and their ripening structure and its function were comparatively investigated to elucidate the causes of unusually low ripened grain ratio of IR667 lines. The following differences between two varieties were found. 1. Though IR667 had much lower ripened grain ratio (64%) than Jinheung (85%) grain yield(790 kg/10a) of IR667 was higher than that (760 kg/10a) of Jinheung. 2. Number of ripined grain per net assimiration rate (NAR) at 10 days after heading was a little higher in IR667 (6,490) than in Jinheung (6,360) consiting to lower grain weight ($29.9{\times}10^{-3}g$) in IR667 than $31.2{\times}10^{-3}g$ of Jinheung. But number of total grain per NAR was much higher (10,530) in IR667 than 7,290 of Jinheung indicating that it was the probable cause of low ripened grain ratio of IR667. 3. Extinction coeificient (K) was 0.115 in IR667 and 0.200 in Jinheung, thus IR667 could construct greater ripening structure per unit area. 4. Number of grain per LAI was decreased with increasing LAI at heading and the decreasing rate was similar for both IR667 and Jinheung. 5. Critical leaf area index at which crop growth rata (CGR) is maximum was 6.5 for IR667 and 5.2 for Jinheung. Below 5.2 of LAI net assimilation rate was always higher an Jinheung throughout the growing season. 6. The estimated optimum leaf area index having maximum grain yield was 7.4 for IR667 and 6.2 for Jinheung at 10 days after heading. However, actual leaf area index was 6.2 for IR-667 and 4.7 for Jinheung and these were even below critical leaf area index. 7. The decrease of LAI during ripening period was great in IR667 but photosynthesis per $m^2$ was decreased more rapidly in Jinheung. 8. Net assimilation rate (NAR) decreased with the increase of LAI at any time of ripening period. The decreasing rate of NAR with the increase of LAI was greater in IR667 with ripening. The greater decreasing rate of NAR in IR667 seemed to be attributed to low photosynthetic activity and high respiratory loss due to the requirement of higher optimum temperature of ripening. 9. Grain yield-ripened grain ratio curve showed less contribution of dry matter yield after heading to grain yield in IR667 than in Jinheung due to unfavorable ripening environment(specialy air temperature) indicating that yield of IR667 could most effectively increased through the improvement of ripening environment.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.3
• /
• pp.259-267
• /
• 2004

Purpose: NEMA NU2-2001 was proposed as a new standard for performance evaluation of whole body PET scanners. in this study, system performance of Siemens CTI ECAT EXACT 47 PET scanner including spatial resolution, sensitivity, scatter fraction, and count rate performance in 2D and 3D mode was evaluated using this new standard method. Methods: ECAT EXACT 47 is a BGO crystal based PET scanner and covers an axial field of view (FOV) of 16.2 cm. Retractable septa allow 2D and 3D data acquisition. All the PET data were acquired according to the NEMA NU2-2001 protocols (coincidence window: 12 ns, energy window: $250{\sim}650$ keV). For the spatial resolution measurement, F-18 point source was placed at the center of the axial FOV((a) x=0, and y=1, (b)x=0, and y=10, (c)x=70, and y=0cm) and a position one fourth of the axial FOV from the center ((a) x=0, and y=1, (b)x=0, and y=10, (c)x=10, and y=0cm). In this case, x and y are transaxial horizontal and vertical, and z is the scanner's axial direction. Images were reconstructed using FBP with ramp filter without any post processing. To measure the system sensitivity, NEMA sensitivity phantom filled with F-18 solution and surrounded by $1{\sim}5$ aluminum sleeves were scanned at the center of transaxial FOV and 10 cm offset from the center. Attenuation free values of sensitivity wire estimated by extrapolating data to the zero wall thickness. NEMA scatter phantom with length of 70 cm was filled with F-18 or C-11solution (2D: 2,900 MBq, 3D: 407 MBq), and coincidence count rates wire measured for 7 half-lives to obtain noise equivalent count rate (MECR) and scatter fraction. We confirmed that dead time loss of the last flame were below 1%. Scatter fraction was estimated by averaging the true to background (staffer+random) ratios of last 3 frames in which the fractions of random rate art negligibly small. Results: Axial and transverse resolutions at 1cm offset from the center were 0.62 and 0.66 cm (FBP in 2D and 3D), and 0.67 and 0.69 cm (FBP in 2D and 3D). Axial, transverse radial, and transverse tangential resolutions at 10cm offset from the center were 0.72 and 0.68 cm (FBP in 2D and 3D), 0.63 and 0.66 cm (FBP in 2D and 3D), and 0.72 and 0.66 cm (FBP in 2D and 3D). Sensitivity values were 708.6 (2D), 2931.3 (3D) counts/sec/MBq at the center and 728.7 (2D, 3398.2 (3D) counts/sec/MBq at 10 cm offset from the center. Scatter fractions were 0.19 (2D) and 0.49 (3D). Peak true count rate and NECR were 64.0 kcps at 40.1 kBq/mL and 49.6 kcps at 40.1 kBq/mL in 2D and 53.7 kcps at 4.76 kBq/mL and 26.4 kcps at 4.47 kBq/mL in 3D. Conclusion: Information about the performance of CTI ECAT EXACT 47 PET scanner reported in this study will be useful for the quantitative analysis of data and determination of optimal image acquisition protocols using this widely used scanner for clinical and research purposes.

• Cartoon and Animation Studies
• /
• s.41
• /
• pp.455-486
• /
• 2015

The 3D printing technology, which started from the patent registration in 1986, was a technology that did not attract attention other than from some companies, due to the lack of awareness at the time. However, today, as expiring patents are appearing after the passage of 20 years, the price of 3D printers have decreased to the level of allowing purchase by individuals and the technology is attracting attention from industries, in addition to the general public, such as by naturally accepting 3D and to share 3D data, based on the generalization of online information exchange and improvement of computer performance. The production capability of 3D printers, which is based on digital data enabling digital transmission and revision and supplementation or production manufacturing not requiring molding, may provide a groundbreaking change to the process of manufacturing, and may attain the same effect in the character merchandise sector. Using a 3D printer is becoming a necessity in various figure merchandise productions which are in the forefront of the kidult culture that is recently gaining attention, and when predicting the demand by the industrial sites related to such character merchandise and when considering the more inexpensive price due to the expiration of patents and sharing of technology, expanding opportunities and sectors of employment and cultivating manpower that are able to engage in further creative work seems as a must, by introducing education courses cultivating manpower that can utilize 3D printers at the education field. However, there are limits in the information that can be obtained when seeking to introduce 3D printers in school education. Because the press or information media only mentions general information, such as the growth of the industrial size or prosperous future value of 3D printers, the research level of the academic world also remains at the level of organizing contents in an introductory level, such as by analyzing data on industrial size, analyzing the applicable scope in the industry, or introducing the printing technology. Such lack of information gives rise to problems at the education site. There would be no choice but to incur temporal and opportunity expenses, since the technology would only be able to be used after going through trials and errors, by first introducing the technology without examining the actual information, such as through comparing the strengths and weaknesses. In particular, if an expensive equipment introduced does not suit the features of school education, the loss costs would be significant. This research targeted general users without a technology-related basis, instead of specialists. By comparing the strengths and weaknesses and analyzing the problems and matters requiring notice upon use, pursuant to the representative technologies, instead of merely introducing the 3D printer technology as had been done previously, this research sought to explain the types of features that a 3D printer should have, in particular, when required in education relating to the development of figure merchandise as an optional cultural contents at cartoon-related departments, and sought to provide information that can be of practical help when seeking to provide education using 3D printers in the future. In the main body, the technologies were explained by making a classification based on a new perspective, such as the buttress method, types of materials, two-dimensional printing method, and three-dimensional printing method. The reason for selecting such different classification method was to easily allow mutual comparison of the practical problems upon use. In conclusion, the most suitable 3D printer was selected as the printer in the FDM method, which is comparatively cheap and requires low repair and maintenance cost and low materials expenses, although rather insufficient in the quality of outputs, and a recommendation was made, in addition, to select an entity that is supportive in providing technical support.

• The Korean Journal of Air & Space Law and Policy
• /
• v.32 no.1
• /
• pp.3-51
• /
• 2017

From a historical point of view, while the Warsaw Convention was passed in 1924 to regulate the unified judicial responsibility in the global air transportation industry, protection of airline consumers was somewhat lacking in protecting air carriers. In principle, the air carrier does not bear any obligation or liability when the aircraft is not operated normally due to natural disasters such as typhoon or heavy snowfall. However, in recent years, in developed countries such as the US and Europe, there has been a movement in which regulates the air carriers' obligation to protect their passengers even if there is no misconduct or negligence. Furthermore, the legislation of such advanced countries imposes an obligation on the airlines to compensate the loss separately from damages in case the abnormal operation of the aircraft is not caused by force majeure but caused by their negligence. Under this historical and international context, Korea is also modifying the system of aviation consumer protection by referring to other foreign legislation. However, when compared with foreign countries, our norm has a few drawbacks. First, the airline's protection or care obligations are mixed with the legal liability for damages in the provision, which seems to be due to the lack of understanding of the airline's passenger protection obligation. The liability for damages, which is governed by the International Convention or the Commercial Act, shall be determined by judging the cause of the airline's liability in respect of the damage of the individual passenger in the course of the air transportation. However, the duty to care and the burden for compensation shall be granted to all passengers who feel uncomfortable with the abnormal operation regardless of the cause of the accident. Also, our compensation system for denied boarding due to oversale is too low compared to the case of foreign countries, and setting the compensation amount range differently based on the time for the re-routing is somewhat unclear. Regarding checked-baggage claim, it will be necessary to refund the fee only from the fact that the baggage is delayed without asking whether there is any damage occurred from the delayed baggage. This is the content of the duty to care, which is different from the current Commercial Act or the international convention, in which responsibility is different depending on whether the airline takes all the necessary measures in order to prevent delaying of the baggage. The content of force majeure, which is a requirement for exemption from the obligation to care passengers on the airplane, shall be reconsidered. Maintenance for safe navigation is not considered to be included in force majeure, and connection to airplanes, airport conditions are disputable. According to the EC Regulation, if the cause of the abnormal operation of the airline is force majeure, the airline's compensation obligation is exempted but the duty to care of airline company is still meaningful. Furthermore, even if the main role of aviation consumer protection is on an airline, it is the responsibility of government agencies to supervise the fulfillment of such protection obligations. Therefore, it is necessary for the Korean government to actively take measures such as enforcing incentives for airlines that faithfully fulfill their obligation to care and imposed penalties on the contrary.

• Radiation Oncology Journal
• /
• v.20 no.2
• /
• pp.116-122
• /
• 2002

Purpose : A randomized prospective study was conducted to compare the efficacy of early or late alternating schedules of radiotherapy, and carboplatin and ifosfamide chemotherapy in patients with limited-disease small cell lung cancer. Materials and Methods: From August 1993 to August 1996, a total of 44 patients with newly diagnosed, limited-disease small cell lung cancer, PS $H0\~2$, wt $loss<10\%$ were enrolled in a randomized trial which compared early alternating radiotherapy (RT)/chemotherapy (CT) and late alternating RT/CT. The CT regimen included ifosfamide $1.5\;g/m^2$ IV, d1-5 and carboplatin AUC 5/d IV, d2 peformed at 4 week intervals for a total of 6 cycles. RT (54 Gy/30 fr) was started after the first cycle of CT (early arm, N=22) or after the third cycle of CT (late arm, N=22) with a split course of treatment. Results : The pretreatment characteristics between the two arms were well balanced. The response rates in the early $(86\%)$ and late $(85\%)$ arm were similar. The median survival durations and 2-year survival rates were 15 months and $22.7\%$ in the early arm, and 17 months and $14.9\%$ in the late arm (p=0.47 by the log-rank test). The two-year progression free survival rates were $19.1\%$ in the early arm and $19.6\%$ in the late arm (p=0.52 by the log-rank test). Acute grade 3 or 4 hematologic and nonhematologic toxicities were similar between the two arms. Eighteen patients $(82\%)$ completed 6 cycles of CT in the early arm and 17 $(77\%)$ in the late arm. Four patients received less than 45 Gy of RT in the early arm and two in the late arm. There was no significant difference in the failure patterns. The local failure rate was $43\%$ in the early arm and $45\%$ in the late arm. The first site of failure was the brain in $24\%$ of the early arm patients compared to $35\%$ in the late arm (p=0.51). Conclusion : There were no statistical differences in the overall survival rate and the pattern of failure between the early and late alternating RT/CT in patients with limited-disease small cell lung cancer.

• The Korean Journal of Air & Space Law and Policy
• /
• v.30 no.2
• /
• pp.37-81
• /
• 2015

AirAsia QZ8501 Jet departed from Juanda International Airport in, Surabaya, Indonesia at 05:35 on Dec. 28, 2014 and was scheduled to arrive at Changi International Airport in Singapore at 08:30 the same day. The aircraft, an Airbus A320-200 crashed into the Java Sea on Dec. 28, 2014 carrying 162 passengers and crew off the coast of Indonesia's second largest city Surabaya on its way to Singapore. Indonesia's AirAsia jet carrying 162 people lost contact with ground control on Dec. 28, 2014. The aircraft's debris was found about 66 miles from the plane's last detected position. The 155 passengers and seven crew members aboard Flight QZ 8501, which vanished from radar 42 minutes after having departed Indonesia's second largest city of Surabaya bound for Singapore early Dec. 28, 2014. AirAsia QZ8501 had on board 137 adult passengers, 17 children and one infant, along with two pilots and five crew members in the aircraft, a majority of them Indonesian nationals. On board Flight QZ8501 were 155 Indonesian, three South Koreans, and one person each from Singapore, Malaysia and the UK. The Malaysia Airlines Flight 370 departed from Kuala Lumpur International Airport on March 8, 2014 at 00:41 local time and was scheduled to land at Beijing's Capital International Airport at 06:30 local time. Malaysia Airlines also marketed as China Southern Airlines Flight 748 (CZ748) through a code-share agreement, was a scheduled international passenger flight that disappeared on 8 March 2014 en route from Kuala Lumpur International Airport to Beijing's Capital International Airport (a distance of 2,743 miles: 4,414 km). The aircraft, a Boeing 777-200ER, last made contact with air traffic control less than an hour after takeoff. Operated by Malaysia Airlines (MAS), the aircraft carried 12 crew members and 227 passengers from 15 nations. There were 227 passengers, including 153 Chinese and 38 Malaysians, according to records. Nearly two-thirds of the passengers on Flight 370 were from China. On April 5, 2014 what could be the wreckage of the ill-fated Malaysia Airlines was found. What appeared to be the remnants of flight MH370 have been spotted drifting in a remote section of the Indian Ocean. Compensation for loss of life is vastly different between US. passengers and non-U.S. passengers. "If the claim is brought in the US. court, it's of significantly more value than if it's brought into any other court." Some victims and survivors of the Indonesian and Malaysia airline's air crash case would like to sue the lawsuit to the United States court in order to receive a larger compensation package for damage caused by an accident that occurred in the sea of Java sea and the Indian ocean and rather than taking it to the Indonesian or Malaysian court. Though each victim and survivor of the Indonesian and Malaysia airline's air crash case will receive an unconditional 113,100 Unit of Account (SDR) as an amount of compensation for damage from Indonesia's AirAsia and Malaysia Airlines in accordance with Article 21, 1 (absolute, strict, no-fault liability system) of the 1999 Montreal Convention. But if Indonesia AirAsia airlines and Malaysia Airlines cannot prove as to the following two points without fault based on Article 21, 2 (presumed faulty system) of the 1999 Montreal Convention, AirAsia of Indonesiaand Malaysia Airlines will be burdened the unlimited liability to the each victim and survivor of the Indonesian and Malaysia airline's air crash case such as (1) such damage was not due to the negligence or other wrongful act or omission of the air carrier or its servants or agents, or (2) such damage was solely due to the negligence or other wrongful act or omission of a third party. In this researcher's view for the aforementioned reasons, and under the laws of China, Indonesia, Malaysia and Korea the Chinese, Indonesian, Malaysia and Korean, some victims and survivors of the crash of the two flights are entitled to receive possibly from more than 113,100 SDR to 5 million US$ from the two airlines or from the Aviation Insurance Company based on decision of the American court. It could also be argued that it is reasonable and necessary to revise the clause referring to bodily injury to a clause mentioning personal injury based on Article 17 of the 1999 Montreal Convention so as to be included the mental injury and condolence in the near future.