• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.263-266
• /
• 1987

Generally an incandescent lamp is made in the bulb with a horizontal position filament. In this paper the position of filament was changed Into a vortical position. When the position of filament is changed into a vertical position, efficacy is increased and color rendering is somewhat improved. In this subject the heat loss by a filling gas is important. The heat loss by a filling gas was calculated theoretically. The results in an Incandescent lamp experiment can be analyzed through the heat loss by a filling gas. As a filling gas the mixture of argon and nitrogen is used. The variation of lamp characteristics by the shape of filament rill be considered. The change by filament position to a vortical position is required in the field of power consumption saving of lighting system.

• 항공우주시스템공학회지
• /
• 제4권3호
• /
• pp.17-23
• /
• 2010

GPS sensors provide accurate position and velocity of moving vehicles. However, GPS is weak at intermittent signal loss and large position error. Combination with INS improves the GPS position accuracy during the GPS signal loss. In this paper, a fusion filter using GPS and INS is developed and its perfomance is analyzed with RC car and RC airplane experiments.

• Journal of Power Electronics
• /
• 제10권4호
• /
• pp.405-411
• /
• 2010

This paper proposes a novel tracking algorithm considering radiation to improve the power of a photovoltaic (PV) tracking system. The sensor method used in a conventional PV plant is unable to track the sun's exact position when the intensity of solar radiation is low. It also has the problem of malfunctions in the tracking system due to rapid changes in the climate. The program method generates power loss due to unnecessary operation of the tracking system because it is not adapted to various weather conditions. This tracking system does not increase the power above that of a power of tracking system fixed at a specific position due to these problems. To reduce the power loss, this paper proposes a novel control algorithm for a tracking system and proves the validity of the proposed control algorithm through a comparison with the conventional PV tracking method.

• Journal of Ubiquitous Convergence Technology
• /
• 제2권2호
• /
• pp.78-87
• /
• 2008

Received signal strength indicator (RSSI) is used as one of the ranging techniques to locate dynamic sensor nodes in wireless sensor network. Before it can be used for position estimation, RSSI values must be converted to distances using path loss model. These distances among sensor nodes are combined using trilateration method to find position. This paper presents an idea which attempts to integrate both path loss model and trilateration as one algorithm without going through RSSI-distance conversion. This means it is not simply formulas combination but a whole new model was developed. Several advantages were found after integration: it is able to reduce processing load, and ensure that all values do not exceed the maximum range of 16-bit signed or unsigned numbers due to antilog operation in path loss model. The results also show that this method is able to reduce estimation error while inaccurate environmental parameters are used for RSSI-distance conversion.

• 설비공학논문집
• /
• 제22권6호
• /
• pp.413-418
• /
• 2010

The amount of heat loss of a refrigerator through the gasket is nearly 30% of total refrigerator heat loss. In this paper, quantitative evaluation for the effects of various effort to reduce heat losses through the gasket. The first trial is to extend the inner gasket to prevent the heat loss flowing from the inner of refrigerator. The effects of thermal conductivity changes of gasket and magnet are investigated by the numerical heat transfer analysis. The position change of hot line is also examined in the present research. From the present result of the numerical simulation of heat transfer, we are able to reduce the heat loss about 20~40% by using inner gasket extension. The reducing of thermal conductivity of gasket is considerable in the heat loss reduction. On the other hand, the thermal conductivity change of magnet has no apparent effect in heat loss reduction. The position change of hot line has considerable positive effect in the reduction of heat loss near gasket region.

• 한국가스학회지
• /
• 제14권2호
• /
• pp.47-52
• /
• 2010

최근에 공압 제어 시스템에서 정압기를 장착하여 에너지를 절감하는 연구가 진행되고 있다. 정압기는 내부적으로 매우 복잡하기 때문에 유체력 손실에 영향을 끼친다. 따라서 정압기 설계 시, 유체역학적 접근을 통한 설계 변수의 도출은 매우 중요하다. 본 연구에서는 상용 CFD 패키지인 FLUENT를 사용하여 정압기 내에서 팁의 크기, 팁의 위치, 그리고 유량이 유체력 손실에 끼치는 영향을 살펴보았다. t/T 비가 0.8이상일 때, 유체력 손실을 증가시키지 않으면서 목표 감압을 이룰 수 있었고, 위치의 영향은 크지 않음을 알 수 있었다.

• 대한치과교정학회지
• /
• 제46권3호
• /
• pp.155-162
• /
• 2016

Objective: The aim of this study was to investigate whether labial tooth inclination and alveolar bone loss affect the moment per unit of force ($M_t/F$) in controlled tipping and consequent stresses on the periodontal ligament (PDL). Methods: Three-dimensional models (n = 20) of maxillary central incisors were created with different labial inclinations ($5^{\circ}$, $10^{\circ}$, $15^{\circ}$, and $20^{\circ}$) and different amounts of alveolar bone loss (0, 2, 4, and 6 mm). The $M_t/F$ necessary for controlled tipping ($M_t/F_{cont}$) and the principal stresses on the PDL were calculated for each model separately in a finite element analysis. Results: As labial inclination increased, $M_t/F_{cont}$ and the length of the moment arm decreased. In contrast, increased alveolar bone loss caused increases in $M_t/F_{cont}$ and the length of the moment arm. When $M_t/F$ was near $M_t/F_{cont}$, increases in Mt/F caused compressive stresses to move from a predominantly labial apical region to a palatal apical position, and tensile stresses in the labial area moved from a cervical position to a mid-root position. Although controlled tipping was applied to the incisors, increases in alveolar bone loss and labial tooth inclination caused increases in maximum compressive and tensile stresses at the root apices. Conclusions: Increases in alveolar bone loss and labial tooth inclination caused increases in stresses that might cause root resorption at the root apex, despite the application of controlled tipping to the incisors.

• 전자공학회논문지S
• /
• 제35S권11호
• /
• pp.19-27
• /
• 1998

차세대 셀룰라 이동통신 시스템은 기지국의 소형화와 서로 다른 크기의 기지국의 복합형태인 계층구조 셀룰라 형태를 가지게 되는데 이에 따른 시스템의 컨트롤은 이동국의 정확한 위치와 속도에 관한 추정을 전제로 한다[13]. 본 논문에서는 지금까지 연구되어온 이동국의 위치 추정 기법인 AOA(Angle of Arrival)와 TOA(Time of Arrival) 및 TDOA(TIme Difference of Arrival)의 방법을 설명하고 그 문제점을 분석하였고, 반사와 회절이 심하여 이동국의 위치 및 속도 추정이 어려운 마이크로셀 환경에서는 서비스 지역내 경로손실 값의 이산 지역 데이터 베이스를 이용하여 이동국의 위치를 추정하는 방법을 제안하였다. 속도의 추정은 위치의 추정치로부터 시간에 대한 변화값으로 얻었다. 오차를 최소화하기 위하여 시스템의 Causality를 만족하는 범위 안에서 이동평균(Moving Average) 방법의 Smoothing을 적용하여 그 성능을 개선하였다. 또한 이산지역 데이터 베이스의 탐색지역을 줄이는 방법을 제안함으로 시스템의 구현을 간단하게 할 수 있는 방안을 제시하였다.

• 한국인터넷방송통신학회논문지
• /
• 제18권3호
• /
• pp.83-92
• /
• 2018

본 논문은 빠르게 확대되고 있는 산업으로 각광 받고 있는 드론을 활용하여 특정 신호를 발생하는 목표물의 위치를 추정하고자 Apollonius Circle 기법을 활용하였다. 기존의 방향탐지 방법은 지상에서 차량을 통해 실시하거나 높은 위치에 안테나를 설치하여 목표물의 위치를 탐지했지만 기존의 방향탐지 방법은 LOS 신호 수신 환경을 구성하기 어렵고 또한 장비의 무게와 크기 때문에 이동 측정이 어렵다. 그러나 드론을 활용한 방향탐지는 높은 고도에서 비행하는 드론을 이용해 LOS 신호 수신 환경을 구성 및 이동 측정이 쉽다. 본 연구에서는 지상 방향탐지의 측정데이터를 이용하여 드론의 신호 수신환경을 3차원 800MHz Path-Loss Model를 활용하여 신호를 재구성하여 드론 수신 Power로 재구성하였으며 목표물의 위치를 추정하고자Apollonius Circle 기법을 활용하여 목표물의 위치를 추정하는 시뮬레이션을 구성하였다. 시뮬레이션은 지상 방향탐지와 드론 방향탐지를 구성하여 목표물의 위치추정 성능을 분석하였다.

• Journal of Periodontal and Implant Science
• /
• 제49권3호
• /
• pp.185-192
• /
• 2019

Purpose: Implant wall thickness and the height of the implant-abutment interface are known as factors that affect the distribution of stress on the marginal bone around the implant. The goal of this study was to evaluate the long-term effects of supracrestal implant placement and implant wall thickness on maintenance of the marginal bone level. Methods: In this retrospective study, 101 patients with a single implant were divided into the following 4 groups according to the thickness of the implant wall and the initial implant placement level immediately after surgery: 0.75 mm wall thickness, epicrestal position; 0.95 mm wall thickness, epicrestal position; 0.75 mm wall thickness, supracrestal position; 0.95 mm wall thickness, supracrestal position. The marginal bone level change was assessed 1 day after implant placement, immediately after functional loading, and 1 to 5 years after prosthesis delivery. To compare the marginal bone level change, repeated-measures analysis of variance was used to evaluate the statistical significance of differences within groups and between groups over time. Pearson correlation coefficients were also calculated to analyze the correlation between implant placement level and bone loss. Results: Statistically significant differences in bone loss among the 4 groups (P<0.01) and within each group over time (P<0.01) were observed. There was no significant difference between the groups with a wall thickness of 0.75 mm and 0.95 mm. In a multiple comparison, the groups with a supracrestal placement level showed greater bone loss than the epicrestal placement groups. In addition, a significant correlation between implant placement level and marginal bone loss was observed. Conclusions: The degree of bone resorption was significantly higher for implants with a supracrestal placement compared to those with an epicrestal placement.