• 한국초전도ㆍ저온공학회논문지
• /
• 제17권4호
• /
• pp.16-20
• /
• 2015

We investigated optical properties of an electron-doped copper oxide high temperature superconductor, $Pr_{0.85}LaCe_{0.15}CuO_4$ (PLCCO) single crystal. We obtained the optical conductivity from measured reflectance at various temperatures. We found our data contained c-axis longitudinal optical (LO) phonon modes due to miscut and intrinsic lattice distortion. We applied an extended Drude model to study the correlations between charge carriers in the system. The LO phonons appear as strong sharp peaks in the optical scattering rate. We tried to remove the LO phonon modes by using the energy loss function, which also shows the LO phonons as peaks, and could not remove them completely. We extracted the electron-boson spectral density function using a generalized Allen's formula. We observed that the resulting electron-boson density show similar temperature dependence as hole-doped cuprates.

• 한국수산과학회지
• /
• 제49권3호
• /
• pp.277-284
• /
• 2016

In this study, we investigated the quality characteristics of madeleine combined with lyophilized red snow crab Chionoecetes japonicus leg-meat powder (CM). The madeleine was prepared by the addition of wheat flour containing 0, 1, 5, 10, 15 and 20% concentrations of CM. Moisture content, pH, and baking loss rate did not differ significantly among groups. Light coloration significantly decreased in a dose-dependent manner, while red and yellow coloration significantly increased. Hardness, chewiness and gumminess significantly increased in a dose-dependent manner, while cohesiveness, springiness and adhesiveness did not differ from CON (madeleine containing 0% CM). In terms of sensory characteristics, appearance and color did not differ compared to CON, while taste, flavor and overall preference increased in a dose-dependent manner, with CM10 having the highest score among the groups. The present study assesses the potential of this improved formula as a convenience food.

• 대한한의학원전학회지
• /
• 제28권1호
• /
• pp.97-110
• /
• 2015

Objectives : Usually medical terminology of oriental mecidine has a multiple meaning. But concept of Shanghan(傷寒) should be simple, because Shanghanlun(傷寒論) is a clinical guideline book. So I researched to suggest many concept of Shanghan, which are suitable for each chapter of Shanghanlun. Methods : I enumerated provisions including Shnaghan from the original texts of Gangpyeong-Shanghanlun(康平傷寒論). And I translated and reviewed them. Results : 1. Shanghan of Preface(序文) means a disease of high fatality. 2. Shanghan of Shanghanrye(傷寒例) means diseases due to physical damage of cold weather. 3. Shanghan of Diagnosis of Daeyang Disease(辨大陽病) - Neck stiffness(痙), Dampness(濕), Sun stroke(暍) means certain disease names accompanying fever, chill. 4. Shanghan used in Diagnosis of Diseases is a premise of many provisions of Shanghanlun. And Shanghan is made up of finished fever, expected fever, chill, body pain, loss of appetite, image of tension. Conclusions : We can use a appropriate translation on Shanghan of each chapter of Gangpyeong-Sanghanlun. Especially Shanghan used in "Diagnosis of Diseases" should have more accurate meaning.

• Journal of Nutrition and Health
• /
• 제28권4호
• /
• pp.331-344
• /
• 1995

The process of breast feeding was investigated from the 36th week of pregnancy to 12 weeks postnatal, in order to analyze the factors affecting breast feeding duration and provide the basic data on an education program for successful breast feeding. The general characteristics of study group had no marked effects on the breastfeeding duration. The young and highly condition during pregnancy and the degree of morning sickness affected the practice of breastfeeding. In the study of prenatal sociobehavioral factors, intended duration affected the breastfeeding duration, and the maternal perception that breastfeeding is good for weight loss after delivery as well as infant formula milk is not as good as breast milk, led to successful breast feeding. Among the postnatal biological factors, the duration of gestation affected the breast feeding. Among the postnatal biological factors, the duration of gestation affected the breastiffeding outcome. In the case of early parturition, breastfeeding rate was low. Among the postnatal biocultural factors, time of first feed, milk volume and maternal perception of infant's sucking ability affected the bresatfeeding duration. From these result, it is suggested that an education program such as participation of nursing class to the pregnant women should be provided for successful breastfeeding.

• 한국수자원학회논문집
• /
• 제53권10호
• /
• pp.861-870
• /
• 2020

자갈 입자로 구성된 다공성매질에서는 유속이 증가하여 레이놀즈수가 커지게 되면 흐름은 Darcy의 영역을 벗어나게 된다. 본 연구는 인공함양 유역의 소하천에 설치예정인 돌망태 보의 채움재를 통과하는 비선형적인 흐름특성을 규명하기 위하여 자갈칼럼과 돌망태모형을 이용한 투수실험을 수행하였다. 칼럼실험을 통하여 공극유속과 수리경사의 관계식과 계수를 결정하고, 수리평균반경과의 상관관계식을 제안하였다. 제안식으로 부터 계산된 공극유속과 공극유량은 돌망태모형 투수실험의 측정치와 잘 일치하였다.

• 한국표면공학회지
• /
• 제38권4호
• /
• pp.156-162
• /
• 2005

Nickel-iron nanocrystalline alloys with different compositions and grain sizes were fabricated by electro-plating for MEMS devices. The iron content of the deposits was changed by varying the nickel/iron ion ratio in the electrolyte. X-ray diffraction (XRD) analysis was applied for measuring the strength of the texture and grain size of the deposits. The nickel/iron atom ratio of the deposits was analyzed by EDS. The hardness of the alloys was evaluated by Vickers hardness indenter. The internal stress of the deposits was measured by Thin Film Stress Measurement using Stoney's formula. Surface morphology and roughness were investigated by Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). The results of this study revealed that at a grain size of approximately $17\~24$nm the hardness, internal stress and roughness depend strongly on the iron content. With increasing the iron content, the hardness and internal stress of the deposits increased. An excellent correlation between the increase in the internal stress and the loss of (200) texture was found.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.588-593
• /
• 2011

The Main design parameters of ship HVAC systems are pressure drop and noise analysis of ducts. The Noise prediction for HVAC(Heating, Ventilating and Air Conditioning) systems are normally performed by empirical method suggested by NEBB(National Environmental Balancing Bureau, 1994), but NEBB's method is not suitable for the ship HVAC systems. In this paper, numerical analysis methods are used to develop a noise prediction method for the ship HVAC systems, especially for large ducts. To develop regression formula of attenuation of sound pressure level in large duct, Boundary Element Method(BEM) is used. Using dynamic loss coefficient which is suggested by ASHRAE fitting data base and numerical methods of HVAC noise analysis, integrated HVAC noise analysis of Program is developed. The developed program can present pressure drop and noise analysis of the ship HVAC systems. To verify the accuracy and convenience of the developed program, prediction of HVAC system for Semi-Submersible Drilling RIG is carried out and the results are compared with measurement of noise level during sea trial.

• 한국자동차공학회논문집
• /
• 제5권6호
• /
• pp.77-88
• /
• 1997

The heat rejection to coolant is a dominant factor for building vehicle cooling system such as radiator and cooling fan. Since the vehicle cooling system also has effects on fuel consumption and noise, the study of heat rejection to coolant has been emphasized. However, the study on heat rejection to coolant has been mainly focused on the field that related to the characteristics of combustion and localized heat loss. It is no much of use in design for the entire cooling system because it is focused on such a specific point. In this work, the heat rejection rate to coolant for four different engines are obtained to derive a simple heat transfer empirical formula that can be applied to the engine cooling system design, and it is compared with the other studies. Also, to observe effects of engine operation factors and heat transfer factors on coolant, we measured the metal temperature and the heat rejection rate. The heat rejection to coolant does not depend significantly upon the coolant flowrate, but mainly upon the amount of air fuel mixture and the air fuel ratio as long as the composition of coolant does not change. The reduction of heat rejection to coolant did not effectively improve the fuel consumption, but was mostly converted to raise the exhaust gas temperature and the oil temperature.

• 한국전자파학회논문지
• /
• 제10권2호
• /
• pp.207-217
• /
• 1999

오프셋 반사경 안테나에서 1차복사기가 초점에 위치 하지 않을 경우 개구면 상의 전계분포에 위상왜곡이 생기게 되어 최대 빔 방향이 바뀌고 이득이 감소하며 사이드로브가 증가한다. 이런 스캔특성을 고찰하기 위 하여 1차복사기가 초점에서 벗어나 있는 오프셋 반사경 안테나의 복사패턴을 짧은 시간에 정확하게 계산할 수 었도록 Zernike 다항식을 이용하여 해석하고 이로부터 반사경의 구조에 따른 스캔로스에 관한 데이터를 나타냈다. 또한 오프셋 반사경 안테나에서 구조에 따른 BDF를 계산할 수 있도록 이론을 전개하고 계산 결과 를 제시하여 빔 편향 특성을 알아볼 수 있게 하였으며 간단한 BDF 근사식도 제시하였다.

• Journal of Electrical Engineering and information Science
• /
• 제2권3호
• /
• pp.29-40
• /
• 1997

Two asymptotic analyses of the queue length distribution at a statistical multiplexor supporting heterogeneous exponential on-off sources are considered. The first analysis is performed by approximating the cell generation rates as a multi-dimensional Ornstein-Uhlenbeck process and then applying the Benes queueing formula. In the second analysis, w state with a system of linear equations derived from the exact expressions of the dominant eigenvalue of the matrix governing the queue length distribution. Assuming that there are a large number of sources, we obtain asymptotic approximations to the dominant eigenvalue. Based on the analyses, we define a traffic descriptor to include the mean and the variance of the cell generation rate and a burstiness measure. A simple expression for the quality of service (QoS) in cell loss rate is derived in terms of the traffic descriptor parameters and the multiplexor parameters (output link capacity and buffer size). The result is then used to quantify the factors determining the required capacity of a call taking the statistical multiplexing gain into consideration. As an application of the analyses, we can use the required capacity calculation for simple yet effective connection admission control(CAC) algorithms.