• Progress in Superconductivity and Cryogenics
• /
• v.17 no.4
• /
• pp.16-20
• /
• 2015

We investigated optical properties of an electron-doped copper oxide high temperature superconductor, $Pr_{0.85}LaCe_{0.15}CuO_4$ (PLCCO) single crystal. We obtained the optical conductivity from measured reflectance at various temperatures. We found our data contained c-axis longitudinal optical (LO) phonon modes due to miscut and intrinsic lattice distortion. We applied an extended Drude model to study the correlations between charge carriers in the system. The LO phonons appear as strong sharp peaks in the optical scattering rate. We tried to remove the LO phonon modes by using the energy loss function, which also shows the LO phonons as peaks, and could not remove them completely. We extracted the electron-boson spectral density function using a generalized Allen's formula. We observed that the resulting electron-boson density show similar temperature dependence as hole-doped cuprates.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.3
• /
• pp.277-284
• /
• 2016

In this study, we investigated the quality characteristics of madeleine combined with lyophilized red snow crab Chionoecetes japonicus leg-meat powder (CM). The madeleine was prepared by the addition of wheat flour containing 0, 1, 5, 10, 15 and 20% concentrations of CM. Moisture content, pH, and baking loss rate did not differ significantly among groups. Light coloration significantly decreased in a dose-dependent manner, while red and yellow coloration significantly increased. Hardness, chewiness and gumminess significantly increased in a dose-dependent manner, while cohesiveness, springiness and adhesiveness did not differ from CON (madeleine containing 0% CM). In terms of sensory characteristics, appearance and color did not differ compared to CON, while taste, flavor and overall preference increased in a dose-dependent manner, with CM10 having the highest score among the groups. The present study assesses the potential of this improved formula as a convenience food.

• Journal of Korean Medical classics
• /
• v.28 no.1
• /
• pp.97-110
• /
• 2015

Objectives : Usually medical terminology of oriental mecidine has a multiple meaning. But concept of Shanghan(傷寒) should be simple, because Shanghanlun(傷寒論) is a clinical guideline book. So I researched to suggest many concept of Shanghan, which are suitable for each chapter of Shanghanlun. Methods : I enumerated provisions including Shnaghan from the original texts of Gangpyeong-Shanghanlun(康平傷寒論). And I translated and reviewed them. Results : 1. Shanghan of Preface(序文) means a disease of high fatality. 2. Shanghan of Shanghanrye(傷寒例) means diseases due to physical damage of cold weather. 3. Shanghan of Diagnosis of Daeyang Disease(辨大陽病) - Neck stiffness(痙), Dampness(濕), Sun stroke(暍) means certain disease names accompanying fever, chill. 4. Shanghan used in Diagnosis of Diseases is a premise of many provisions of Shanghanlun. And Shanghan is made up of finished fever, expected fever, chill, body pain, loss of appetite, image of tension. Conclusions : We can use a appropriate translation on Shanghan of each chapter of Gangpyeong-Sanghanlun. Especially Shanghan used in "Diagnosis of Diseases" should have more accurate meaning.

• Journal of Nutrition and Health
• /
• v.28 no.4
• /
• pp.331-344
• /
• 1995

The process of breast feeding was investigated from the 36th week of pregnancy to 12 weeks postnatal, in order to analyze the factors affecting breast feeding duration and provide the basic data on an education program for successful breast feeding. The general characteristics of study group had no marked effects on the breastfeeding duration. The young and highly condition during pregnancy and the degree of morning sickness affected the practice of breastfeeding. In the study of prenatal sociobehavioral factors, intended duration affected the breastfeeding duration, and the maternal perception that breastfeeding is good for weight loss after delivery as well as infant formula milk is not as good as breast milk, led to successful breast feeding. Among the postnatal biological factors, the duration of gestation affected the breast feeding. Among the postnatal biological factors, the duration of gestation affected the breastiffeding outcome. In the case of early parturition, breastfeeding rate was low. Among the postnatal biocultural factors, time of first feed, milk volume and maternal perception of infant's sucking ability affected the bresatfeeding duration. From these result, it is suggested that an education program such as participation of nursing class to the pregnant women should be provided for successful breastfeeding.

• Journal of Korea Water Resources Association
• /
• v.53 no.10
• /
• pp.861-870
• /
• 2020

As the flow velocity and Reynolds number increase in rockfill porous media, the flow deviates from Darcy conditions. In this study, the permeability tests of rock column specimen and laboratory gabion weir model were carried out to investigate a head loss behaviour of flow through rockfill deposition in small river artificial recharge. Through column test, the nonlinear relationships between flow velocity and hydraulic gradient and coefficients were determined and the correlation formula of hydraulic mean radius and coefficients was proposed. The flow velocities and discharges in voids estimated by proposed equations were well matched with the measured values of laboratory gabion weir model.

• Journal of the Korean institute of surface engineering
• /
• v.38 no.4
• /
• pp.156-162
• /
• 2005

Nickel-iron nanocrystalline alloys with different compositions and grain sizes were fabricated by electro-plating for MEMS devices. The iron content of the deposits was changed by varying the nickel/iron ion ratio in the electrolyte. X-ray diffraction (XRD) analysis was applied for measuring the strength of the texture and grain size of the deposits. The nickel/iron atom ratio of the deposits was analyzed by EDS. The hardness of the alloys was evaluated by Vickers hardness indenter. The internal stress of the deposits was measured by Thin Film Stress Measurement using Stoney's formula. Surface morphology and roughness were investigated by Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). The results of this study revealed that at a grain size of approximately $17\~24$nm the hardness, internal stress and roughness depend strongly on the iron content. With increasing the iron content, the hardness and internal stress of the deposits increased. An excellent correlation between the increase in the internal stress and the loss of (200) texture was found.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.588-593
• /
• 2011

The Main design parameters of ship HVAC systems are pressure drop and noise analysis of ducts. The Noise prediction for HVAC(Heating, Ventilating and Air Conditioning) systems are normally performed by empirical method suggested by NEBB(National Environmental Balancing Bureau, 1994), but NEBB's method is not suitable for the ship HVAC systems. In this paper, numerical analysis methods are used to develop a noise prediction method for the ship HVAC systems, especially for large ducts. To develop regression formula of attenuation of sound pressure level in large duct, Boundary Element Method(BEM) is used. Using dynamic loss coefficient which is suggested by ASHRAE fitting data base and numerical methods of HVAC noise analysis, integrated HVAC noise analysis of Program is developed. The developed program can present pressure drop and noise analysis of the ship HVAC systems. To verify the accuracy and convenience of the developed program, prediction of HVAC system for Semi-Submersible Drilling RIG is carried out and the results are compared with measurement of noise level during sea trial.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.6
• /
• pp.77-88
• /
• 1997

The heat rejection to coolant is a dominant factor for building vehicle cooling system such as radiator and cooling fan. Since the vehicle cooling system also has effects on fuel consumption and noise, the study of heat rejection to coolant has been emphasized. However, the study on heat rejection to coolant has been mainly focused on the field that related to the characteristics of combustion and localized heat loss. It is no much of use in design for the entire cooling system because it is focused on such a specific point. In this work, the heat rejection rate to coolant for four different engines are obtained to derive a simple heat transfer empirical formula that can be applied to the engine cooling system design, and it is compared with the other studies. Also, to observe effects of engine operation factors and heat transfer factors on coolant, we measured the metal temperature and the heat rejection rate. The heat rejection to coolant does not depend significantly upon the coolant flowrate, but mainly upon the amount of air fuel mixture and the air fuel ratio as long as the composition of coolant does not change. The reduction of heat rejection to coolant did not effectively improve the fuel consumption, but was mostly converted to raise the exhaust gas temperature and the oil temperature.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.2
• /
• pp.207-217
• /
• 1999

When the feed of an offset reflector antenna is displaced from the focal point, the phase distortion results in the aperture field distribution, which in turn gives rise to a deviation of maximum beam, a decrease in gain, and an increase in sidelobes. In order to study these scan characteristics, an offset reflector antenna with the defocused feed is analyzed by a series expansion method using the Zernike polynomials, which can be used to calculate radiation pattern fast and exactly. And from the analyzed results, scan loss data in terms of reflector geometry are presented. And also, the BDF (beam deviation factor) expression is derived with offset reflector configuration analytically, and calculated results and simple formula of BDF are presented for determining beam deviation characteristics.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.3
• /
• pp.29-40
• /
• 1997

Two asymptotic analyses of the queue length distribution at a statistical multiplexor supporting heterogeneous exponential on-off sources are considered. The first analysis is performed by approximating the cell generation rates as a multi-dimensional Ornstein-Uhlenbeck process and then applying the Benes queueing formula. In the second analysis, w state with a system of linear equations derived from the exact expressions of the dominant eigenvalue of the matrix governing the queue length distribution. Assuming that there are a large number of sources, we obtain asymptotic approximations to the dominant eigenvalue. Based on the analyses, we define a traffic descriptor to include the mean and the variance of the cell generation rate and a burstiness measure. A simple expression for the quality of service (QoS) in cell loss rate is derived in terms of the traffic descriptor parameters and the multiplexor parameters (output link capacity and buffer size). The result is then used to quantify the factors determining the required capacity of a call taking the statistical multiplexing gain into consideration. As an application of the analyses, we can use the required capacity calculation for simple yet effective connection admission control(CAC) algorithms.