• International Journal of Fluid Machinery and Systems
• /
• v.3 no.1
• /
• pp.11-19
• /
• 2010

The performance of the crossover system of a centrifugal compressor stage consisting of static components of $180^{\circ}$ U-bend, return channel vanes and exit ducting with a $90^{\circ}$ bend is investigated. This study is confined to the assessment of performance of the crossover system by varying the shape of the return channel vanes. For this purpose two different types of Return Channel Vanes (RCV1 and RCV2) were experimentally investigated. The performance of the crossover system is discussed in terms of total pressure loss coefficient, static pressure recovery coefficient and vane surface pressure distribution. The experimentation was carried out on a test setup in which static swirl vanes were used to simulate the flow at the exit of an actual centrifugal compressor impeller with a design flow coefficient of 0.053. The swirl vanes are connected to a mechanism with which the flow angle at the inlet of U-bend could be altered. The measurements were taken at five different operating conditions varying from 70% to 120% of design flow rate. On an overall assessment RCV1 is found to give better performance in comparison to RCV2 for different U-bend inlet flow angles. The performance of RCV2 was verified using numerical studies with the help of a CFD Code. Three dimensional sector models were used for simulating the flow through the crossover system. The turbulence was predicted with standard k-$\varepsilon$, 2-equation model. The iso-Mach contour plots on different planes and development of secondary flows were visualized through this study.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4B
• /
• pp.162-169
• /
• 2005

Network traffic measurements show that the data traffic on packet switched networks has the self-similar features which is different from the traditional traffic models such as Poisson distribution or Markovian process model. Most of the call admission control researches have been done on the performance analysis of a single network switch. It is necessary to consider the performance analysis of the proposed admission control scheme under interconnected switch environment because the data traffic transmits through switches in networks. From the simulation results, it is shown that the call admission control scheme may not operate properly on the interconnected switch even though the scheme works well on a single switch. In this parer, we analyze the cell loss probability, utilization and self-similarity of output ports of the interconnected networks switch by using shared buffer memory management schemes and propose the new call admission control scheme considering the interconnected network switches under self-similar traffic environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11A
• /
• pp.1946-1956
• /
• 2001

In this paper, we propose a novel 2-D partial matching algorithm based on model-based stochastic analysis of feature correspondences in a relation vector space, which is quite robust to shape variations as well as invariant to geometric transformations. We represent an object using the ARG (Attributed Relational Graph) model with features of a set of relation vectors. In addition, we statistically model the partial occlusion or noise as the distortion of the relation vector distribution in the relation vector space. Our partial matching algorithm consists of two-phases. First, a finite number of candidate sets areselected by using logical constraint embedding local and structural consistency Second, the feature loss detection is done iteratively by error detection and voting scheme thorough the error analysis of relation vector space. Experimental results on real images demonstrate that the proposed algorithm is quite robust to noise and localize target objects correctly even inseverely noisy and occluded scenes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3B
• /
• pp.408-422
• /
• 2000

In this paper, we propose a generalized vector channel model for wireless communication systems using antenna arrays. The proposed channel model reflects path loss. spatial-temporal variation of shadowing, multipath fading , Doppler effect, spatial distribution of local scatterers and delay spread due to remote dominant scatterers. In addition, we use a discrete ray model in which respective ray signal experiences independent shadowing, fading and Doppler shift, and impinges on antenna arrays at a distinct angle. Based on the proposed mode. we derive the relations on the spatial and temporal correlations of the received signals and implement a spatial channel simulator. By comparing the theoretical values with the simulated ones, we verify the effectiveness of the implemented simulator. The simulator is then used to generate an arbitrary channel impulse response and to analyze the channel characteristics under various environments.

• Journal of the Korean Electrochemical Society
• /
• v.18 no.4
• /
• pp.172-181
• /
• 2015

Solid Oxide Fuel Cells (SOFC) continue to be among the most promising alternative energy devices. This paper addresses i-V characteristics of SOFC with a focus on air flow rate along the planar anode electrodes. To address this, detailed Butler-Volmer kinetics are implemented in a general-purpose CFD code FLUENT. The numerical results were validated against experimental data from the literature showing excellent match with i-V polarization data ranging 1V-0.4V. Numerical calculations of fuel cell operation under different flow rare conditions were performed in three-dimensional geometries. Results are presented in terms of concentration distribution of hydrogen, oxygen, and water. The simulations and results indicate that advanced CFD with UDF(User-Defined Function) of Butler-Volmer kinetics can be used to identify the conditions leading to air flow rate and specific surface area and guide development of operating conditions and improve the fuel cell system performance.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.4
• /
• pp.659-664
• /
• 2020

In this paper, we propose a silicon-based electro-optic (EO) modulator which can modulate a sign of a topological charge number l of |l|=1 orbital angular momentum (OAM) mode. The proposed EO modulator consists of position-dependent doped Si waveguide core and undoped SiO2, cladding, which enables control of the effective index and propagation loss of two OAM constitutive eigenmodes. The modulator functions as OAM mode maintaining waveguide at -0.33V and as topological charge sign inverter at 10V. The output OAM mode purity is calculated through electric field distribution, showing high purity of |l|>0.92 in both cases.

• Journal of KIISE:Information Networking
• /
• v.30 no.6
• /
• pp.705-713
• /
• 2003

For group security to protect group data or to charge, group keys should be updated via key update messages when the membership of group changes. If we lose these messages, it is not possible to decrypt the group data and so this is why the recovery of lost keys is very significant. Any message lost during a certain member is logged off can not be recovered in real-time. Saving all messages and resending them by KDC (Key Distribution Center) not only requests large saving spaces, but also causes to transmit and decrypt unnecessary keys. This paper analyzes the problem of the loss of key update messages along with other problems that may arise during member login procedure, and also gives an efficient method for recovering group keys and auxiliary keys. This method provides that group keys and auxiliary keys can be recovered and sent effectively using information stored in key-tree. The group key generation method presented in this paper is simple and enable us to recover any group key without storing. It also eliminates the transmissions and decryptions of useless auxiliary keys.

• Journal of the Korean association of regional geographers
• /
• v.20 no.2
• /
• pp.153-162
• /
• 2014

This Research is to study types and distribution for place name of migration derived from Korea Peninsula by analyzing villages name of the Yanbian Korean Autonomous Prefecture. Village names of Yanbian Korean were identified as 945 out of 2,015. Place name migrated from Korea Peninsula was turned out 51 villages. Up to the present time in the Transition of China, 34 place names were disappeared, maintained place names were 16, and rehabilitated place name after loss was 1. The place name by naming method were classified as small area directed migration, large area directed migration, and merged migration. In case of small area directed migration, origin and destination is same such as Jeongeup and Muju, Cheonbuk, large area directed migration is named case by region migrants like a Gangwonchon named by people moved from GanwonDo, and merged case combine initials with each village names in case of GilseongChon by colligated Gilju and Seokseongmyeon. The results will be expected to support research information for identity and ethnical migration process.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1998.10a
• /
• pp.68-111
• /
• 1998

The structure of the Hanwoo (Korean Native Cattle) Industry remains very weak and vulnerable to the WTO/IMF system. Considering that the majority of cattle farmers are small sized, and that marketing systems are outdated and inefficient, rapid expansion of lower priced beef imports by WTO system and rapid increasing of production costs by IMF system would lead to the deprivation of a regular source of farm income and threaten the stability of rural life. Accordingly, the Hanwoo industry should be expanded in accordance with progress in the implementation of (1) programs for the structural adjustment and (2) measures to compensate for the loss. Efforts for lowering major production factor costs needs to continue, In order to increase the supply of calves at low cost, the programs of collective cow-calf farms should be expanded, thereby reducing the cost of calf purchase, which constitutes the largest share of Hanwoo production cost. Also, feedlot operations should be encouraged for small herd farms in order to achieve a substantial saving in beef production costs by integrated operations from calf production to cattle fattening. A substantial saving would also be made by collective purchase and distribution of various inputs through the cooperatives' channels. Extension services should be strengthened for cattle farm management, cattle care and feeding, prevention of cattle disease, etc. In order to minimize cash outlays for commercial mixed feeds, utilization of far by-products as feeds should be enhanced and production of forage crops productive of resources, such as land and rural labor, during the farm o(f-season, needs to be encouraged. Also, technological development for enhancing the nutritional value of farm by-products should be encouraged. Measures for successful segregation of the Hanwoo beef market should be implemented, thereby enhancing incentive for quality beef producers and protecting consumers willing to pay higher price for quality beef. For development of the Hanwoo industry, a considerable time frame would be required in order for (1) small livestock farmers to make a successful adjustment by staying in the enterprise and achieving increased price efficiency (2) livestock farmers to acquire know-how for producing quality Hanwoo beef, (3) the ongoing Government policy of enhancing price-quality competitiveness, and for improving the quality Hanwoo beef marketing to take root. (4) consumers to increase their ability to distinguish meat quality, and others.

• Journal of the Korean Society of Combustion
• /
• v.19 no.3
• /
• pp.1-7
• /
• 2014

Experimental study has been carried out to understand combustion characteristics of a swirl-stabilized premixed gas turbine combustor for power generation. $NO_x$ and CO emissions, extinction limit, pressure loss, and temperature distribution were measured for various operating conditions. Results show that, with increasing inlet air temperature, $NO_x$ is increased due to a higher adiabatic flame temperature while CO is increased or decreased for low or high A/F ratio regime, respectively. depending on the flame location. With decreasing load from the design condition, $NO_x$ is decreased as thermal load is reduced. With further decreasing load, however, $NO_x$ is increased due to a longer residence time. CO is decreased and then increased with decreasing load. Flame extinction limit is extended with increasing inlet air temperature as the recirculation strength is enhanced.