• 전기학회논문지
• /
• 제65권1호
• /
• pp.158-164
• /
• 2016

That's the reason why LED lighting has to employ AC power inlet. However, LED is a kind of diode, semiconductor, it's driven by DC power. With whis reason all of LED lighting should have AC/DC converter in its systems. This converter causes energy loss, it's the target for lesson the energy loss. To reduce this energy loss, DC power distribution structure can be used. LED lighting system using LVDC is a kind of DC power distribution structure, but LVDC has severe voltage drop which makes non-uniform brightness in lighting system. In this paper, we suggest a novel structure for the uniform brightness in LVDC LED lighting system using IoT based network system. The constructed test-bed system of suggested structure shows this structure can con control the brightness with uniformity.

• 한국전산구조공학회논문집
• /
• 제15권3호
• /
• pp.421-432
• /
• 2002

본 연구에서는 진동제어를 목적으로 강성이 평면에서 비대칭적으로 분포된 구조물에 감쇠기를 설치할 경우 감쇠편심과 강성편심에 따른 모드특성 및 변위응답의 변화에 관하여 연구하였다 모드 특성으로는 고유진동수, 모드 감쇠비, 모드참여계수, 동적 증폭계수 등의 변화를 분석하였으며, 변위는 지진이력에 대한 약변, 강변, 무게중심 등에서의 변위를 비교하였다. 또한 이를 바탕으로 비틀림 응답을 최소화하기 위한 감쇠기의 적정 감쇠 편심 및 적정 감쇠 분배 문제에 대해 논하였으며, 단층구조물에서 유도된 적정 감쇠분배 방법을 다층구조뭍에 적용하고 그 효과를 확인하였다.

• 한국식품저장유통학회지
• /
• 제10권2호
• /
• pp.142-146
• /
• 2003

국내에서 생산, 유통되는 주요 과일류인 복숭아, 사과, 배, 단감, 글에 대하여 환경 조건별, 품종별 호흡속도와 증산속도를 분석함으로서 유통중 객관적인 포장 농산물의 감모율의 허용기준 근거를 마련하고자 하였다. 신선 과일류의 호흡특성과 증산특성은 동일 품목이라도 품종과 수확시기에 따라 다르게 나타났다. 과일류의 호흡속도는 온도가 높을수록 높게 나타났으며 호흡작용의 과 발생되는 수증기 발생량은 3.55∼107.67mg/kg/h로 골판지 박스의 강도 저하에 영향을 미칠 정도로 높지는 않았다. 증산작용 결과 발생되는 수증기의양은 15kg 포장의 경우 5일후 24∼l,195g으로 호흡속도에 의해 발생한 수증기 양에 비해 훨씬 높게 나타났다.

• 한국화재소방학회논문지
• /
• 제31권4호
• /
• pp.7-11
• /
• 2017

각종 화재, 폭발, 누출, 테러 사고 시 발생되는 유해가스로부터 작업자나 소방대원들의 안전을 확보하고 원활한 구조활동을 위하여 입자형 활성탄을 여과재로 사용하는 특수 방독면의 필요성이 크게 증가하고 있다. 본 연구에서는 CFD 유동해석을 통하여 활성탄 정화통에 대한 압력손실 특성을 규명하였으며, 해석 결과 호흡유량에 대한 압력손실은 유속이 빠를수록, 여과재의 입자가 작을수록, 공극률이 작을수록 커지지만, 특정 조건 이상에서는 그 변화가 매우 크게 나타나 활성탄 여과재의 선택 시 이를 충분히 고려하여야 하는 것으로 분석되었다.

• 한국기계가공학회지
• /
• 제21권7호
• /
• pp.64-70
• /
• 2022

The aim of this study is to improve the purification efficiency of odor gas by increasing the contact area between an odor gas and adsorbent. To analyze the flow in the adsorption tower, the flow characteristics in the hollow activated carbon-adsorption tower are identified by applying the loss model, which is a porous flow analysis model. The flow characteristics are investigated for pressure loss, velocity distribution, turbulent kinetic energy, and residence time distribution. The results show that the hollow adsorption tower performs better than the solid adsorption tower in terms of pressure loss and performance. The inner diameter of the hollow region inside the adsorption tower is 0.64 m (Di/Do = 0.37). Furthermore, the adsorbent performance is unaffected even when adsorbent stages are installed to replace the adsorbent.

• Journal of Periodontal and Implant Science
• /
• 제34권4호
• /
• pp.819-836
• /
• 2004

Nowdays, the awareness of implant treatment has grown rapidly among dentists and patients alike in Korea, as it becomes a widely accepted treatment. The reason is that unlike crown and bridge or denture treatment, implant treatment helps preserve existing bone and improve masticatory functions. So, It is needed understanding about the type, distribution of implant patient. The following results on patient type and implant distribution were compiled from 4433 implant cases of 1596 patients treated at the periodontal dept. of Y University Hospital during 1992 to 2004. 1. There are no dissimilarities between men and women, with patients in their 40, 50s accounting for 52.5% of patients and 57.5% of implant treatments; the largest share of patients and implant treatments. 2. Mn. posterior area accounted for 54.9% of implant treatments followed by Mx. posterior area(27.6%), Mx anterior area(11.9%) and Mn anterior area(5.6%). 3. Partial edentulous patients treated by single crown and bridge-type prosthesis accounted for 97.5% and fully edentulous patient accounted for the remaining 2.5%. 4. The major cause of tooth loss is periodontal disease, followed by dental caries, trauma and congenital missing. Also, older people are more likely to suffer from tooth loss due to periodontal disease rather than dental caries. 5. In the distribution of bone quality for maxillae, type III was most, followed by type II, r type IV and r type I. As for mandible, type II was most, followed by type III, type IV and for type I. 6. In the distribution of bone quantity for maxillae, type C was most, followed by type B, type D, type A, and for type E. As for mandible, type B was 52% most, followed by type C, type D, type A and type E. 7. The majority of implants were those of 1O-14mm in length (85.2%) and regular diameter in width (64%). The results provided us with basic data on patient type, implant distribution, bone condition, etc. We wish that our results coupled with other research data helps assist in the further study for better implant success/survival rates, etc.

• 한국음향학회지
• /
• 제41권2호
• /
• pp.174-183
• /
• 2022

본 논문에서는 내부 유체를 갖는 수중에 몰수된 탄성 쉘이 기포층으로 둘러싸여 있을 때의 음향 방사를 모드 이론을 이용해 연구했다. 전 방향성의 점음원이 내부 유체의 중심에 위치해 있고 음향 소음원으로서 사용되었다. 모드 해의 미지수는 매질 사이의 경계조건으로부터 계산된다. 넓은 주파수 대역에서 모드 해의 안정성을 유지하기 위해, 모드 해의 규격 기법이 사용되었다. 기포 층은 Commander와 Prosperetti의 유효 매질 이론에 기반하여, 단일 모드 분포, 균일 분포, 정규 분포, 멱함수 분포를 이용해 각각 모의되었다. 각각의 기포 분포에 대해 삽입손실이 주파수에 대해 계산되었다. 추가적으로 공극비, 탄성 쉘의 매질 특성, 탄성 쉘과 기포층의 간극의 영향에 대한 수치해석을 수행했다.

• 대한산업공학회지
• /
• 제11권1호
• /
• pp.33-39
• /
• 1985

A stochastic model for an inventory system in which depletion of stock takes place due to random demand as well as random loss of items is studied under the assumption that the intervals between successive unit demands, as well as those between successive unit losses are independently and identically distributed random variables having negative exponential distribution with respective parameters. We have derived the steady state probability distribution of the stock level assuming instantaneous delivery of order under (s, S) inventory policy. Also we have derived total expected cost expression and the necessary conditions to be satisfied for an optimal solution.

• Journal of Information Technology Applications and Management
• /
• 제15권2호
• /
• pp.67-82
• /
• 2008

Risk that breed large size disaster is happening variously for cause at social. natural a management. Incidence and damage scale are trend that increase rapidly than past. In these circumstance, to keep operational continuity of organization, area, society, risk management action that establish systematic counter measure estimating and analyze occurrence possibility and expectation damage of risk is essential indispensable issue and the best countermeasure. Risk management action does by main purpose establish optimum disaster reduction countermeasure. To deduce various countermeasure, process that estimate and analyze occurrence possibility and expectation damage of risk is essential indispensable issue. Therefore, this paper studies process design that can presume risk occurrence frequency and damage scale through distribution of probability.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.331-334
• /
• 2005

This paper suggests the Ethernet aggregation to XGMII framing procedure (EAXFP) mechanism to economically combine the traffic adaptation technology with the link aggregation method in designing 10 Gigabit Ethernet (10 GbE) interfaces. This design sidesteps the data-loss issues that can result from designing an interface with only one link. The most critical issue in relation to the link aggregation interface is the algorithm used to control frame distribution between the ten ports. The proposed EAXFP mechanism offers an efficient link aggregation method as well as an efficient frame distribution algorithm, which maximize the throughout of the 10 GbE interface. In the experiment and analysis of the proposed mechanism, it was also discovered that the 10 GbE interface that uses the proposed EAXFP mechanism significantly reduced the packet loss rate. When there will be heavy traffic loads come about in the future, the proposed EAXFP mechanism assures an efficient and economical transmission performance on the router system.