• 제목/요약/키워드: Loss Rate Parameter

검색결과 126건 처리시간 0.024초

홍채영역에서의 홍채정보 보존율 향상을 위한 새로운 속눈썹 제거 방법 (A Novel Eyelashes Removal Method for Improving Iris Data Preservation Rate)

  • 김성훈;한기태
    • 정보처리학회논문지:소프트웨어 및 데이터공학
    • /
    • 제3권10호
    • /
    • pp.429-440
    • /
    • 2014
  • 홍채 인식은 인간의 눈 영상으로부터 고유한 홍채특징을 추출하고 이를 코드화 하여 비교하는 생체인식 기술로, 이것은 시스템 안에 저장된 다른 홍채들과의 비교기술을 포함한다. 한편, 홍채 영상에서의 속눈썹은 인식률에 영향을 미치는 외부 요소인데, 만일 속눈썹이 홍채영역으로부터 정확하게 제거되지 않는다면 속눈썹을 홍채특징으로 인식하거나 홍채특징을 속눈썹으로 인식하는 오인식의 문제가 존재하게 되며, 결국 이 오인식은 홍채정보의 많은 유실을 가져오게 된다. 따라서 본 논문에서는 이러한 문제점을 해결하기 위하여 주파수 특징 분석에 사용되는 Gabor Filter를 이용한 속눈썹 제거로 홍채정보의 보존율 향상을 가져올 수 있었다. Gabor Filter는 영상의 주파수 분석을 위한 필터 중 하나인데 여기에 각도, 주파수, 가우시안 파라미터 등을 이용한 다양한 홍채영역의 특징들을 추출할 수 있는 새로운 방법으로 다양한 길이와 모양의 속눈썹을 정확하게 제거할 수 있었다. 그 결과 제안한 방법은 GMM 혹은 히스토그램 분석을 이용한 기존 방법보다 홍채영역 데이터 보존율에 있어서 약 4% 정도의 향상이 가능하였다.

유역특성에 의한 합성단위도의 유도에 관한 연구 (Derivation of the Synthetic Unit Hydrograph Based on the Watershed Characteristics)

  • 서승덕
    • 한국농공학회지
    • /
    • 제17권1호
    • /
    • pp.3642-3654
    • /
    • 1975
  • The purpose of this thesis is to derive a unit hydrograph which may be applied to the ungaged watershed area from the relations between directly measurable unitgraph properties such as peak discharge(qp), time to peak discharge (Tp), and lag time (Lg) and watershed characteristics such as river length(L) from the given station to the upstream limits of the watershed area in km, river length from station to centroid of gravity of the watershed area in km (Lca), and main stream slope in meter per km (S). Other procedure based on routing a time-area diagram through catchment storage named Instantaneous Unit Hydrograph(IUH). Dimensionless unitgraph also analysed in brief. The basic data (1969 to 1973) used in these studies are 9 recording level gages and rating curves, 41 rain gages and pluviographs, and 40 observed unitgraphs through the 9 sub watersheds in Nak Oong River basin. The results summarized in these studies are as follows; 1. Time in hour from start of rise to peak rate (Tp) generally occured at the position of 0.3Tb (time base of hydrograph) with some indication of higher values for larger watershed. The base flow is comparelatively higher than the other small watershed area. 2. Te losses from rainfall were divided into initial loss and continuing loss. Initial loss may be defined as that portion of storm rainfall which is intercepted by vegetation, held in deppression storage or infiltrated at a high rate early in the storm and continuing loss is defined as the loss which continues at a constant rate throughout the duration of the storm after the initial loss has been satisfied. Tis continuing loss approximates the nearly constant rate of infiltration (${\Phi}$-index method). The loss rate from this analysis was estimated 50 Per cent to the rainfall excess approximately during the surface runoff occured. 3. Stream slope seems approximate, as is usual, to consider the mainstreamonly, not giving any specific consideration to tributary. It is desirable to develop a single measure of slope that is representative of the who1e stream. The mean slope of channel increment in 1 meter per 200 meters and 1 meter per 1400 meters were defined at Gazang and Jindong respectively. It is considered that the slopes are low slightly in the light of other river studies. Flood concentration rate might slightly be low in the Nak Dong river basin. 4. It found that the watershed lag (Lg, hrs) could be expressed by Lg=0.253 (L.Lca)0.4171 The product L.Lca is a measure of the size and shape of the watershed. For the logarithms, the correlation coefficient for Lg was 0.97 which defined that Lg is closely related with the watershed characteristics, L and Lca. 5. Expression for basin might be expected to take form containing theslope as {{{{ { L}_{g }=0.545 {( { L. { L}_{ca } } over { SQRT {s} } ) }^{0.346 } }}}} For the logarithms, the correlation coefficient for Lg was 0.97 which defined that Lg is closely related with the basin characteristics too. It should be needed to take care of analysis which relating to the mean slopes 6. Peak discharge per unit area of unitgraph for standard duration tr, ㎥/sec/$\textrm{km}^2$, was given by qp=10-0.52-0.0184Lg with a indication of lower values for watershed contrary to the higher lag time. For the logarithms, the correlation coefficient qp was 0.998 which defined high sign ificance. The peak discharge of the unitgraph for an area could therefore be expected to take the from Qp=qp. A(㎥/sec). 7. Using the unitgraph parameter Lg, the base length of the unitgraph, in days, was adopted as {{{{ {T}_{b } =0.73+2.073( { { L}_{g } } over {24 } )}}}} with high significant correlation coefficient, 0.92. The constant of the above equation are fixed by the procedure used to separate base flow from direct runoff. 8. The width W75 of the unitgraph at discharge equal to 75 per cent of the peak discharge, in hours and the width W50 at discharge equal to 50 Per cent of the peak discharge in hours, can be estimated from {{{{ { W}_{75 }= { 1.61} over { { q}_{b } ^{1.05 } } }}}} and {{{{ { W}_{50 }= { 2.5} over { { q}_{b } ^{1.05 } } }}}} respectively. This provides supplementary guide for sketching the unitgraph. 9. Above equations define the three factors necessary to construct the unitgraph for duration tr. For the duration tR, the lag is LgR=Lg+0.2(tR-tr) and this modified lag, LgRis used in qp and Tb It the tr happens to be equal to or close to tR, further assume qpR=qp. 10. Triangular hydrograph is a dimensionless unitgraph prepared from the 40 unitgraphs. The equation is shown as {{{{ { q}_{p } = { K.A.Q} over { { T}_{p } } }}}} or {{{{ { q}_{p } = { 0.21A.Q} over { { T}_{p } } }}}} The constant 0.21 is defined to Nak Dong River basin. 11. The base length of the time-area diagram for the IUH routing is {{{{C=0.9 {( { L. { L}_{ca } } over { SQRT { s} } ) }^{1/3 } }}}}. Correlation coefficient for C was 0.983 which defined a high significance. The base length of the T-AD was set to equal the time from the midpoint of rain fall excess to the point of contraflexure. The constant K, derived in this studies is K=8.32+0.0213 {{{{ { L} over { SQRT { s} } }}}} with correlation coefficient, 0.964. 12. In the light of the results analysed in these studies, average errors in the peak discharge of the Synthetic unitgraph, Triangular unitgraph, and IUH were estimated as 2.2, 7.7 and 6.4 per cent respectively to the peak of observed average unitgraph. Each ordinate of the Synthetic unitgraph was approached closely to the observed one.

  • PDF

자가이식한 상악 견치의 생존율과 성공률에 영향을 주는 예후 인자 연구 (Prognostic Factors Influencing Survival and Success Rates of Autotransplanted Maxillary Canine)

  • 김동현;현홍근;김영재;장기택
    • 대한소아치과학회지
    • /
    • 제44권3호
    • /
    • pp.317-326
    • /
    • 2017
  • 이 연구의 목적은 인위적으로 형성된 수여부에 자가이식한 상악 견치의 생존율과 성공률에 대해 알아보고 성공적인 이식에 영향을 주는 요인에 대해 분석하는 것이다. 28명 남녀 어린이의 37개의 자가이식한 상악 견치에 대해 후향적으로 조사하였으며 평균 관찰 기간은 25.1개월이었다. 임상 및 방사선적 평가를 통해 동요도, 병적인 치근 흡수, 수직적 치조골소실 그리고 유착에 대해 조사하였다. 관찰 기간 동안 100%의 생존을 보였으나 13개의 치아가 실패로 분류되어 64.9%의 성공률을 보였다. Cox 비례위험모형에서 성공률에 영향을 주는 요인은 공여치아의 치낭의 비후로 나타났다. 이 연구는 임상가들에게 자가치아이식 시 인위적으로 치조와를 형성할 경우 예후를 판단하는 지침이 될 수 있다고 생각된다.

CELP 부호화기를 위한 양방향 패킷 손실 은닉 알고리즘 (BS-PLC(Both Side-Packet Loss Concealment) for CELP Coder)

  • 이인성;황정준;정규혁
    • 대한전자공학회논문지TC
    • /
    • 제42권12호
    • /
    • pp.127-134
    • /
    • 2005
  • VoIP에서 패킷의 손실은 음성의 품질에 영향을 주는 가장 중요한 요인이다. 따라서 수신된 정보로부터 손실된 패킷을 복구하는 것은 중요하다. 따라서 본 논문은 VoIP에서 가장 많이 사용되는 CELP 부호화기를 위한 수신측 기반의 손실 패킷 복구방법을 제안한다. 제안하는 WSOLA(Waveform Shift OverLab Add)기반의 BS-PLC (Both Side Packet Loss Concealment) 방법은 패킷 손실이 발생하였을 경우 미래 패킷을 이용할 수 있는 경우와 그렇지 않을 경우로 나누고, LP(Linear prediction) 파라미터와 여기 신호를 복구한다. 미래 패킷을 이용할 수 없는 경우에는 과거에 전송된 정상 패킷만을 가지고 복원을 하며, 미래 패킷을 이용할 수 있을 경우에는 과거의 정상 패킷과 미래의 정상 패킷을 동시에 이용하여 손실된 패킷을 복구한다. 연속 패킷 손실 환경은 Gilbert 모델로 설정하였고, 제안한 알고리즘을 VoIP에서 가장 많이 사용되는 CELP 음성부호화기인 G.729에 적용하여 성능을 비교한다. 성능 비교를 위해 손실율을 변화시키면서 SNR(Signal to Noise)와 MOS(Mean Opinion Score)측정하였고, 제안한 방법을 G.729의 패킷 손실 은닉 방법과 비교하였다. 실험 결과, 평균 손실률이 $20\%$에서도 SNR은 2dB, MOS값은 0.3정도로의 음질 개선을 보였다.

브라운관 전자총 부품의 펄스 Nd:YAG레이저 용접에 관한 연구 (I) - 빔의 출력특성과 광학변수 - (A Study on Pulsed Nd:YAG Laser Welding of Electron Gun in Braun Tubes (I) - Characteristics of Beam Output Energy and Optical Parameters -)

  • 김종도;하승협;조상명
    • Journal of Welding and Joining
    • /
    • 제20권4호
    • /
    • pp.525-534
    • /
    • 2002
  • During laser spot welding of the braun tube electron gun, phenomena such as serious spattering and oxidative reaction, etc. were occurred. The spatter occurred from weld pool affects the braun tube, namely it blocks up a very small hole on the shadow mask and causes short circuit between two roles of the electron gun. We guessed that high power density and oxidative reaction are main sources of these problems. So, we studied to prevent and to reduce spatter occurring in spot welding of the braun tube electron gun using pulsed Nd:YAG laser. The characteristics of laser output power was estimated, and the loss of laser energy by optical parameter and spatter was measured by powermeter. The effects of welding parameters, laser defocused distance and incident angle, were investigated on the shape and penetration depth of the laser welded bead in flare and flange joints. From these results, the laser peak power was a major factor to control penetration depth and to occur spatter. It was found that the losses of laser energy by optic parameter and sticked spatter affect seriously laser weldability of thin sheets. The deepest penetration depth is gotten on focal position, and a "bead transition" occurred with a slight displacement of focal position relative to the workpiece surface and the absorption rate of the laser energy is affected by the shape factor of the workpiece. When we changed the incident angle of laser beam, the penetration depth was decreased a little with increasing of the incident angle, and the bead width was increased. The spattering was prevented by considering laser beam energy and incident angle.ent angle.

무선 ATM망에서 rt-VBR 서비스를 위한 동적 슬롯 할당 기법 (Dynamic slot allocation scheme for rt-VBR services in the wireless ATM networks)

  • 양성룡;임인택;허정석
    • 정보처리학회논문지C
    • /
    • 제9C권4호
    • /
    • pp.543-550
    • /
    • 2002
  • 본 논문에서는 무선 ATM망에서 rt-VBR 서비스를 위한 동적 슬롯 할당 기법을 제안한다. 제안된 방식에서는 슬롯 할당을 요구하기 위한 예약 요청 패킷을 경쟁 기반으로 전송하고, 예약 요청이 성공하면 단말기에서는 비 경쟁 방식으로 동적 매개변수를 전달한다. 기지국 스케줄러는 예약이 성공한 단말기들이 잔여수명과 요청하는 슬롯 수와 같은 동적 매개변수를 전송하기 위한 DPS 미니슬롯을 할당한다. 한편 기지국 스케줄러는 단말기들이 전송한 잔여수명을 기반으로 잔여수명이 가장 짧은 단말기에게 상향 데이터 슬롯을 우선적으로 할당한다. 본 논문에서는 제안한 방식의 성능을 시뮬레이션을 통하여 분석하였다. 시뮬레이션의 결과, 제안한 동적 슬롯 할당 기법은 셀 손실률을 낮게 유지하면서 rt_VBR 서비스가 요구하는 전송 지연을 보장하고 있음을 알 수 있다.

ITU 모델을 이용한 공용데이터링크 기반의 공중중계 시스템의 커버리지 예측 (Coverage Prediction for Aerial Relay Systems based on the Common Data Link using ITU Models)

  • 박재수;송영환;최효기;윤창배;황찬호
    • 한국전자통신학회논문지
    • /
    • 제15권1호
    • /
    • pp.21-30
    • /
    • 2020
  • 본 논문에서는 국제전기통신연합에서 권고하는 경로손실 예측모델을 이용하여 지상통제소와 무인 항공기 사이의 공대지 채널에 대한 경로손실을 예측하고, 이를 공대공 채널로 확장하여 중고도급 무인 항공기를 기반으로 하는 공중중계 시스템에 대한 네트워크 커버리지를 분석한다. 대기에 의한 경로손실 예측을 위해 한반도의 기후 및 지리적 인자를 활용하였다. 특히 국내의 강우량 및 유효지구반경 인자는 한국정보통신기술협회에서 공시한 실측 데이터를 활용하여 정확도를 높였다. 또한, 공중중계 송수신기는 현재 국내에서 개발 완료된 공용데이터링크 시스템의 주요지표를 활용하였다. 예측 결과로부터 임무 고도가 높아질수록 공중중계 시스템의 네트워크 커버리지가 넓어짐을 확인하였다.

AA5182 알루미늄 판재의 Nd:YAG 레이저 용접에서 유전 알고리즘을 이용한 공정변수 최적화에 대한 연구 (A Study of Process Parameters Optimization Using Genetic Algorithm for Nd:YAG Laser Welding of AA5182 Aluminum Alloy Sheet)

  • 박영환;이세헌;박현성
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2007년도 춘계학술대회A
    • /
    • pp.1322-1327
    • /
    • 2007
  • Many automotive companies have tried to apply the aluminum alloy sheet to car body because reducing the car weight can improve the fuel efficiency of vehicle. In order to do that, sheet materials require of weldablity, formability, productivity and so on. Aluminum alloy was not easy to join these metals due to its material properties. Thus, the laser is good heat source for aluminum alloy welding because of its high heat intensity. However, the welding quality was not good by porosity, underfill, and magnesium loss in welded metal for AA5182 aluminum alloy. In this study, Nd:YAG laser welding of AA 5182 with filler wire AA 5356 was carried out to overcome this problem. The weldability of AA5182 laser welding with AA5356 filler wire was investigated in terms of tensile strength and Erichsen ratio. For full penetration, mechanical properties were improved by filler wire. In order to optimize the process parameters, model to estimate tensile strength by artificial neural network was developed and fitness function was defined in consideration of weldability and productivity. Genetic algorithm was used to search the optimal point of laser power, welding speed, and wire feed rate.

  • PDF

건물 연료전지용 재생블로어 설계변수 특성연구 (Characteristics of Design Parameters on the Regenerative Blower Used for Building Fuel Cell System)

  • 장춘만;이종성
    • 설비공학논문집
    • /
    • 제24권10호
    • /
    • pp.739-744
    • /
    • 2012
  • This paper describes the blower performance used for single-stage high pressure regenerative blower. The blower considered is widely applied to the field of a fuel cell system, a medical equipment and a sewage treatment plant. Flow rate and rotating frequency of a impeller of the blower are considered as design parameters for the proper operation of the blower. Three-dimensional Navier-Stokes equations are introduced to analyze the performance and internal flow of the blower. Relatively good agreement between experimental measurements and numerical simulation is obtained. Throughout a numerical simulation, it is found that small and stable vortical flow generated inside the blade passage is effective to increase pressure and efficiency of the blower. Large local recirculation flow having low velocity in the blade passage obstructs the generation of stable vortical flow, thus increases the pressure loss of the blower. Detailed flow field inside the blower is also analyzed and discussed.

스태빌라이져 위치 및 리어가이더 형상변화에 따른 횡류홴의 성능특성 연구 (Performance of a Cross-Flow Fan with Various Stabilizer Positions and Rearguider Shapes)

  • 김동원;김형섭;윤태석;박성관;김윤제
    • 한국유체기계학회 논문집
    • /
    • 제7권4호
    • /
    • pp.7-15
    • /
    • 2004
  • The design point of the cross-flow fan is generally based on the region within low static pressure and high flow rate. It relatively makes high dynamic pressure at low speed because a working fluid passes through an impeller blade twice. However, it has low static pressure efficiency between $30\%$ and $40\%$ because of relative high impact loss. The purpose of this study is to research the reciprocal relation among each parameter. Experiments and numerical analyses are conducted on effects of a stabilizer and a rearguider on performance analysis of a cross-flow fan. Two-dimensional, unsteady governing equations are solved using FVM, PISO algorithm, sliding grid system and standard $k-{\epsilon}$ turbulence model. Experiments are also carried out to estimate the performance of the modeled cross-flow fan. It is clarified that the rearguider of Archimedes type has excellent results for the most part.