• 한국의류학회지
• /
• 제23권7호
• /
• pp.998-1006
• /
• 1999

This study has investigated the relation between the sewing speed and seam breaking strength applied perpendicular to the seam direction. Breaking strength efficiency breaking mode of seams were examined under various sewing conditions using three kinds of sewing threads and four kinds of fabrics. The results obtained are as follows : 1. According to the increase in sewing speed seam strength was remarkably decreased. Seam strength and its loss difference were shown variously as threads and fabrics were mixed. 2. In case of fabrics with higher strength seam strength showed higher. And the seam strength was determined by the loop strength. 3. In case of fabrics with lower strength seam strength and its difference for every sample showed lower. So the strength of fabrics dominated the seam strength than those of threads. 4. In the experiment using various fabrics and sewing threads there was a type of thread appropriate to each fabric. Fabrics and threads with have similar physical properties were shown proper seam efficiency. 5. The breaking mode was different for every sample seam that was tested.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 추계학술발표회
• /
• pp.538-539
• /
• 2005

• Journal of Electrical Engineering and Technology
• /
• 제12권6호
• /
• pp.2208-2218
• /
• 2017

To resolve overload in a distribution system, a distribution system operator (DSO) often performs a load transfer using normally open tie points and switches in the distribution line. During this process, the distribution system is momentarily operated in closed-loop operation. A closed-loop current in the distribution system can cause a power failure due to excess breaking current in the circuit breakers and reclosers. Therefore, it is necessary to calculate the closed-loop current exactly. However, if there are a large number of distributed generation (DG) systems in the distribution system, such as energy storage systems (ESS), they might obstruct the closed-loop operation based on bidirectional power flow. For quick and precise operation of a closed-loop system, the ESS has to regulate the power generation while satisfying closed-loop operation in the worst cases. We propose a strategy for balanced power regulation of an ESS. Simulations were carried out using PSCAD/EMTDC, and the results were compared with calculation results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.592-593
• /
• 2015

Recently, the fault current has increased to exceed the rated breaking capacity of protective device due to the growth of the power demand on the power system where is changed into the loop-, mesh-, network grid. To limit fault current, the superconducting fault current limiter (SFCL) is announced with various methods. In many researches, the current limiting effect with the SFCL has been analyzed considering the rated breaking capacity of the CB with one fault condition. However, the power system has various short circuit and operation conditions. In order to select the capacity of the SFCL with reclosing operation and burden of the fault current on the protective device, the characteristics of the power system were investigated. Through the analysis, the evaluation method of the current rate was improved.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2002년도 학술대회논문집
• /
• pp.97-101
• /
• 2002

The optical current transformer using Faraday effect is the sensor to measure current that flows in any conductor. This sensor doesn't undergo the magnetic saturation and effect of adjacent conductors. But this senor using bulk-glass sensing element has crucial drawback. It is impossible that the sensor is mounted to conductor without breaking the closed-loop of light or conductor. So we developed the clamp-type optical current transformer and made an experiment.

• 대한전자공학회논문지SD
• /
• 제42권11호
• /
• pp.23-32
• /
• 2005

회로도면 자동생성 분야는 지난 수십 년간 HDL기반 설계과정에서 사용되어 왔다. 그러나 회로 도면은 더욱 복잡해져서 레지스터 및 시스템 레벨에서 자동 생성된 회로도면을 보고 신호의 흐름을 파악하기 어렵다. 이와 같이 복잡해진 회로도면의 가독성을 향상시키기 위해 본 논문에서는 4가지 기법, 즉 i ) 심볼이나 터미널들과 같이 반복되는 회로 패턴을 벡터 형태로 치환, ii) 피드백 루프 절단 알고리즘 개선, iii) 번들 네트 생성시 발생하는 다단 연결을 간결 화할 수 있는 압축 탭, iv) 연결도에 따라 블록열을 구분하고 정렬하는 알고리즘을 제안한다. 제안된 회로도면 생성 기법의 효용성을 확인하기 위해 도면 자동생성 프로그램을 개발하고, 계층적으로 설계된 미디어 프로세서의 다양한 모듈의 도면을 생성시켰다. 실험한 결과 도면 면적을 비롯하여 배선 수, 길이 등을 $90\%$까지 감소시키고 가독성을 높이는 효과를 보였으며 블록의 분산 및 빈 공간 발생을 억제하는 효과를 보였다.

• BMB Reports
• /
• 제50권1호
• /
• pp.1-2
• /
• 2017

Acquiring a selective growth advantage by breaking the proliferation barrier established by gatekeeper genes is a centrally important event in tumor formation. Removal of the mammalian Hippo kinase Mst1 and Mst2 in hepatocytes leads to rapid hepatocellular carcinoma (HCC) formation, indicating that the Hippo signaling pathway is a critical gatekeeper that restrains abnormal growth in hepatocytes. By rigorous genetic approaches, we identified an interacting network of the Hippo, Wnt/${\beta}$-catenin and Notch signaling pathways that control organ size and HCC development. We found that in hepatocytes, the loss of Mst1/2 leads to the activation of Notch signaling, which forms a positive feedback loop with Yap/Taz (transcription factors controlled by Mst1/2). This positive feedback loop results in severe liver enlargement and rapid HCC formation. Blocking the Yap/Taz-Notch positive feedback loop by Notch inhibition in vivo significantly reduced the Yap/Taz activities, hepatocyte proliferation and tumor formation. Furthermore, we uncovered a surprising inhibitory role of Wnt/${\beta}$-catenin signaling to Yap/Taz activities, which are important in tumor initiation. Genetic removal of ${\beta}$-catenin in the liver of the Mst1/2 mutants significantly accelerates tumoriogenesis. Therefore, Wnt/${\beta}$-catenin signaling, known for its oncogenic property, exerts an unexpected function in restricting Yap/Taz and Notch activities in HCC initiation. The molecular interplay between the three signaling pathways identified in our study provides new insights in developing novel therapeutic strategies to treat liver tumors.

• Archives of Plastic Surgery
• /
• 제36권4호
• /
• pp.512-515
• /
• 2009

Purpose: Neurofibromatosis(NF) is an autosomal - dominant systemic disease. Up to fifty percent of patients with NF are reported to have concomitant vascular abnormalities. In the resection of a larger NF, the risk of uncontrolled hemorrhage is much higher due to the difficulty of hemostasis of large vessels within the tumor. We ligated the base of the giant NF with a simple loop - shaped ligation before removal of the giant NF in both buttocks. And then we could successfully reduce the amount of hemorrhage during the operation. Methods: A 46 - year - old female patient presented for giant masses of both gluteal area, which has been growing slowly for the last ten years. Each mass was about $30{\times}20cm$ in size. After designing the elliptical resection margin, we tightened the tumor base by using continuous loop - shaped suture ligation(weaving the thread up and down in a loop - shaped pattern, leaving a space of 2 cm between each loop) with a straight needle and prolene 2 - 0. After skin incision, we proceeded the dissection toward the central and inferior side of the mass obliquely while we avoided breaking large vascular sinuses. We resected the tumor in a wedged - shape. Subcutaneous tissue was sutured layer by layer and skin was closed by vertical mattress and interrupted suture. The loop - shaped ligation of the base was removed and compressive dressing was done with gauzes and elastic bandages. Results: Postoperative complications such as infection, hemorrhage, hematoma, and dehiscense did not occur. Perioperatively the patient was sufficiently transfused with five units of blood and two units of fresh frozen plasma. During the subsequent 1 year follow - up, the functional and cosmetic result was excellent. Conclusion: A continuous loop - shaped suture ligation procedure along the base of the giant NF effectively reduced the amount of hemorrhage during the operation, made dissection and ligation of vessels easily and quickly, and shorten the operating time and postoperative recovery time.

• 제어로봇시스템학회논문지
• /
• 제3권5호
• /
• pp.443-449
• /
• 1997

LQ-servo design procedure introduced by Athans is a method using a partial states feedback and an output feedback in order to improve the poor performance robustness of the LQR as well as to maintain its stability robustness. Although the method guarantees good stability robustness, it is not effective in performance robustness as it does not match the singular value at low or high frequencies of the transfer matrix obtained by breaking at the plant output. This paper intends propose of a new method, using the limited behaviour of the control gain introduced by Kwakernaak and Sivan, in order to improve it does it refer to controlga introduced by kwakernaak or the new metho Anblguouls.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1924-1926
• /
• 2002

The optical current transformer using Faraday effect is the sensor to measure current that flows in any conductor. This sensor doesn't undergo the magnetic saturation and effect of adjacent conductors. But this senor using bulk-glass sensing clement has crucial drawback. It is impossible that the sensor is mounted to conductor without breaking the closed-loop of light or conductor. So we developed the clamp-type optical current transformer and made an experiment.