• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1759-1768
• /
• 2018

The energy density, power density and ohm resistance of battery change significantly as results of battery aging, which lead to decrease in the accuracy of the equivalent model. A parameter identification method of the equivale6nt circuit model with 3 R-C branches based on the test database of battery life cycle is proposed in this paper. This database is built on the basis of experiments such as updating of available capacity, charging and discharging tests at different rates and relaxation characteristics tests. It can realize regular update and calibration of key parameters like SOH, so as to ensure the reliability of parameters identified. Taking SOH, SOC and T as independent variables, lookup table method is adopted to set initial value for the parameter matrix. Meanwhile, in order to ensure the validity of the model, the least square method based on variable forgetting factor is adopted for optimizing to complete the identification of equivalent model parameters. By comparing the simulation data with measured data for charging and discharging experiments of Li-ion battery, the effectiveness of the full life cycle database and the model are verified.

• 한국정보통신학회논문지
• /
• 제17권8호
• /
• pp.1891-1898
• /
• 2013

3차원 그래픽 API인 OpenGL과 Direct3D를 효율적으로 처리하기 위해 sine, cosine, 역수, 역제곱근, 지수 및 로그 연산을 처리하는 부동소수점 연산회로를 설계하였다. 고속 연산과 2 ulp 보다 작은 오차를 만족시키기 위해 2차 최대최소 근사 방식과 테이블 룩업 방식을 사용하였다. 설계된 회로는 65nm CMOS 표준 셀 조건에서 2.3-ns의 최대 지연시간을 갖고 있으며, 약 23,300 게이트로 구성된다. 최대 400 MFLOPS의 연산 성능과 높은 정밀도로, 설계한 연산회로는 3차원 모바일 그래픽 분야에 효율적으로 적용 가능하다.

• 한국정보과학회논문지:시스템및이론
• /
• 제31권9호
• /
• pp.536-542
• /
• 2004

본 논문에서는 디지털 주파수 합성기의 구조에 대하여 연구하였다. 디지털 주파수 합성기는 높은 스펙트럼 순도로 빠른 주파수 전환이 가능하고, 현대의 확산 스펙트럼 무선통신 시스템에 널리 사용된다. 롬 기반의 디지털 주파수 합성기는 싸인 파형의 크기를 저장한 롬 테이블을 사용한다. 본 논문에서는 롬의 크기를 줄이는 세 가지 새로운 기술을 제안하였다. 새로운 기법 중 한 가지는 여러 개의 계층적 구조를 사용하였다. 다른 기법들은 계층적 롬 구조를 간단한 보간 기법으로 결합하였다. 이러한 기법으로 12비트의 싸인 파형을 생성하였다. 실험 결과 새롭게 제안한 기법은 기존 방법[1]에 비해 ROM 크기를 24%까지 줄일 수 있다.

• Journal of Communications and Networks
• /
• 제5권1호
• /
• pp.25-32
• /
• 2003

4G mobile communication system requires the throughput of 10-100Mbps. Adaptive modulated OFDM system is promising technique for increasing the throughput. In the pilot symbol assisted high-speed packet transmission system, the data symbol duration is generally considered to be small compared to the coherence time. However, OFDM symbol duration is longer than the symbol duration of a single carrier system, so that the packet duration of the pilot symbol assisted high speed packet transmission system is long. In this case, the change of channel conditions is too fast to be accurately estimated by channel estimator at the receiver in high Doppler frequency, so that many errors occur during demodulation, especially with the data symbols at the end of each packet. In this paper, we consider the BER at various instantaneous $E_b/N_o$ that includes the demodulation errors in high Doppler frequency. When the coherence time is ten times longer than the duration of a single packet, the channel can be closely approximated as an AWGN channel. Otherwise, the approximation breaks down and the above-mentioned errors that occur during demodulation must be taken into consideration. In this paper, we propose the pilot symbol assisted high speed packet transmission system based on adaptive OFDM using a novel lookup table to consider the demodulated errors and evaluate the throughput performance.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2003년도 춘계학술발표논문집 (상)
• /
• pp.409-412
• /
• 2003

The 3-D shape use to effect of movie, animation, industrial design, medical treatment service, education, engineering etc... But it is not easy to make 3-D shape from the information of 2-D image. There are two methods in restoring 3-D video image through 2-D image; First the method of using a laser; Second, the method of acquiring 3-D image through stereo vision. Instead of doing two methods with many difficulties, I study the method of simple 3-D image in this research paper. We present here a simple and efficient method, called direct calibration, which does not require any equations at all. The direct calibration procedure builds a lookup table(LUT) linking image and 3-D coordinates by a real 3-D triangulation system. The LUT is built by measuring the image coordinates of a grid of known 3-D points, and recording both image and world coordinates for each point; the depth values of all other visible points are obtained by interpolation.

• 한국조명전기설비학회지:조명전기설비
• /
• 제7권4호
• /
• pp.42-50
• /
• 1993

본 연구에서는 자동동조 퍼지 PID 제어 앨고리즘을 사용하여 유도전동기 구동방법을 제안하였다. 퍼지제어에서는 수학적인 모델링이 없이 경험적인 정보를 이용하면 제어가 가능하며 퍼지룩업 테이블을 적절히 이용하면 실시간 제어도 가능한 것이 특징이라 볼 수 있다. 또한, 퍼지규칙을 몇 개의 영역으로 구획하여 시스템의 변화가 발생되고, 또 파라미터의 변화가 유도 전동기 구동 특성에 크게 영향을 주는 것을 감안, 본 시스템의 고성능, 고정도제어를 위하여 퍼지 앨고리즘을 적용하여 파라미터가 자동동조 기능을 갖는 유도전동기의 구동 시스템을 설계, 제작하였으며 그 특성을 기존의 PID 제어방식과 비교하였다.

• Journal of Information Processing Systems
• /
• 제10권4호
• /
• pp.628-645
• /
• 2014

In past few years, distributed hash table (DHT)-based P2P systems have been proven to be a promising way to manage decentralized index information and provide efficient lookup services. However, the skewness of users' preferences regarding keywords contained in a multi-keyword query causes a query load imbalance that combines both routing and response load. This imbalance means long file retrieval latency that negatively influences the overall system performance. Although index replication has a great potential for alleviating this problem, existing schemes did not explicitly address it or incurred high cost. To overcome this issue, we propose, in this paper, an integrated solution that consists of three replication schemes to alleviate query load imbalance while minimizing the cost. The first scheme is an active index replication that is used in order to decrease routing load in the system and to distribute response load of an index among peers that store replicas of the index. The second scheme is a proactive pointer replication that places location information of each index to a predetermined number of peers for reducing maintenance cost between the index and its replicas. The third scheme is a passive index replication that guarantees the maximum query load of peers. The result of simulations indicates that the proposed schemes can help alleviate the query load imbalance of peers. Moreover, it was found by comparison that our schemes are more cost-effective on placing replicas than PCache and EAD.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1255-1257
• /
• 2003

This study proposes a single-channel satellite remote sensing algorithm for retrieving aerosol optical thickness over global ocean using FY-1C/1D data. An efficient lookup table (LUT)method is adopted in this algorithm to generate apparent reflectance in channel 1 and channel 2 of FY-1C/1D over ocean. The algorithm scale the apparent reflectance in cloud-free conditions to aerosol optical thickness using a state-of-art radiative transfer model 6S with input of the relative spectral response of channel 1 and 2 of FY-1C/1D. Monthly mean composite maps of the aerosol optical thickness have been obtained from FY-1C/1D global area coverage data between 2001 and 2003. Aerosol optical thickness maps can show the major aerosol source which are located off the west coast of northern and southern Africa, Arabian Sea and India Ocean. These result is very similar to other satellite sensors such as AVHRR and MODIS in the location area of heavy aerosol optical thickness over global ocean. The algorithm have been used to FY-1D operational performance and it is the first operational aerosol remote sensing product in China.

• 대한기계학회논문집
• /
• 제19권11호
• /
• pp.3003-3013
• /
• 1995

The characteristics of the flow field in the tangentially fired furnace are presented. Experiments are conducted in the simplified cold type isothermal flow model. In the measurement of flow field, a hot wire anemometer is used. The hot wire was calibrated by lookup table method. The mean velocity field and turbulence characteristics are showed with changing the nozzle angle. In the center of the model, the low speed, unstable flow region is formed. The size and position of these regions are varied with changing the nozzle angle. It can be used as fundamental data in the design of the large furnace. From the experimental results, various turbulent characteristics of swirling flow field is obtained. And the entrainment mechanism of the jet flow field is described from the distribution of the skewness and the flatness. It can be used the raw data of approximate calculation and turbulent modelling.

• Journal of Power Electronics
• /
• 제17권4호
• /
• pp.914-922
• /
• 2017

Multilevel converters have attracted a lot of attention in recent years. The efficiency parameters of a multilevel converter such as the switching losses and total harmonic distortion (THD) mainly depend on the modulation strategy used to control the converter. Among all of the modulation techniques, the selective harmonic elimination (SHE) method is particularly suitable for high-power applications due to its low switching frequency and high quality output voltage. This paper proposes a new expression for the SHE problem in five-level converters. Based on this new expression, a simple analytical method is introduced to determine the feasible modulation index intervals and to calculate the exact value of the switching angles. For each selected harmonic, this method presents three-level or five-level waveforms according to the value of the modulation index. Furthermore, a flowchart is proposed for the real-time implementation of this analytical method, which can be performed by a simple processor and without the need of any lookup table. The performance of the proposed algorithm is evaluated with several simulation and experimental results for a single phase five-level diode-clamped inverter.