• Journal of Information Display
• /
• v.10 no.1
• /
• pp.6-15
• /
• 2009

In this paper, a new approach is proposed for the efficient generation of computer-generated holograms (CGHs) using the spatially redundant data on a 3D object and the novel look-up table (N-LUT) method. First, the pre-calculated N-point principle fringe patterns (PFPs) were calculated using the 1-point PFP of the N-LUT. Second, spatially redundant data on a 3D object were extracted and re-grouped into the N-point redundancy map using the run-length encoding (RLE) method. Then CGH patterns were generated using the spatial redundancy map and the N-LUT method. Finally, the generated hologram patterns were reconstructed. In this approach, the object points that were involved in the calculation of the CGH patterns were dramatically reduced, due to which the computational speed was increased. Some experiments with a test 3D object were carried out and the results were compared with those of conventional methods.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.18-21
• /
• 2007

Digital image watermarking is a technology used in copyrighting of digital images by embedding unremovable informations. In this paper, a pixel-domain look-up-table-based watermarking algorithm is presented. With this methodology, the watermark was embedded in the host image, but we did not observe any distortion at certain specific region of interest. This means the proposed method is preferred in case of satellite images. Then, the image manipulation tool which is called 'StirMark' will be used to perform many kinds of attacks such as rotation, scaling, filtering and compression on the watermarked image. Finally, the effectiveness of a watermarking technique in terms of 'robustness' and 'data integrity' criteria will be measured by calculating PSNR of watermark and watermarked image.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.12
• /
• pp.35-44
• /
• 1994

In this paper, we propose a new modification method of the look-up table in self-organizing fuzzy control using look-up table. This method has the property that look-up table is modified to have fast response property. Its principle is that the controller forces the trajectory to go into the fast respose region which the error change amount is larger than the error at initial time whenever the reference or disturbance change. Also we introduce the variable learning speed coefficient which is proportional to distance from switching curve. And to demonstrate the applicability of the proposed method, we had simulation study for some examples and esecuted pole balance experiments with inverted pendulum.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1995.10b
• /
• pp.125-130
• /
• 1995

Recently, the vehicle engine requried precision control of Air-Fuel rate and rigid restriction of exhaust gas. Therefore, we demanded excellent measuring equipment so as to improve of engine performance. Specially, throttle valve control is very important part in the engine control, because structure of engine dynamometer system is very important part in the engine control, because structure of engine dynamometer system is very complicate and it has nonlinear elements which is influenced of disturbance about vibration, a heat, a cooling, energy loss so on. In this study, we propose the method that the control technique using Fuzzy Look-up table and we obtained the satisfying result from realized the control system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12C
• /
• pp.1068-1074
• /
• 2008

In this paper, we propose the algorithm for generating the array of elemental image by using look-up table (L UT) in a computer generated integral imaging system. It makes the LUT independently for the projection point of x and y. The algorithm using LUT to the existing ones needs less computing time to generate the array of elemental image. By comparing the computing time of proposed algorithm with that of the existing algorithms e xperimently, we proved the efficiency of proposed algorithm.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.126-127
• /
• 2014

기존 IPMSM (Interior Permanent Magnet Synchronous Motor) 제어를 위한 LUT (Look Up Table)방식은 입력한 일정 간격의 데이터를 이용한 선형 보간 방법이 주로 사용되었다. 하지만, 이러한 방식은 LUT 구성을 위해 많은 데이터를 요구하므로, DSP 메모리 용량에 LUT 구성의 한계가 존재한다. 또한, 많은 양의 데이터를 관리해야하는 단점을 가지고 있다. 본 논문에서는 이러한 단점을 보완하기 위하여 영역 분할을 이용한 다항식 곡면 적합 LUT 구성을 제안하였다. 다항식 곡면 적합을 이용한 LUT 구성 방법은, 관리해야하는 데이터양을 비약적으로 줄일 수 있는 장점을 가지고 있다. 제안한 방법의 효용성은 실험을 통하여 증명하였다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1996.10a
• /
• pp.198-207
• /
• 1996

Electro sensitive traffic system can't consider passenger car unit, so, it causes start up delay time and passenger waiting time. In this paper, it antecedently creates optimal traffic cycle of passenger car unit at the bottom traffic intersection. But, sometimes it can make mistakes due to changes in car weight, car speed, and control of feed-back data. Moreover, to prevent spillback, it can adapt control even though upper traffic intersection has a different saturation rate, road length, road slope and road width.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.4
• /
• pp.388-398
• /
• 1998

In constructing fuzzy control systems. there are many parameters such as rule base. membership functions. inference m method. defuzzification. and I/O scaling factors. To control the system in properly using fuzzy logic. we have to consider t the correlation with those parameters. This paper deals with self-tuning of fuzzy control systems. The fuzzy controller h has parameters that are input and output scaling factors to effect control output. And we propose the looklongleftarrowup table b based self-tuning fuzy controller. We propose the PMTM(Plus-Minus Tuning Method) for self tuning method, self-tuning the initial look-up table to the appropriate table by adding and subtracting the values.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.2
• /
• pp.244-253
• /
• 2000

Since no single routing-switching combination performs the best under various different types of applications, a flexible network is required to support a range of polices. This paper introduces an implementation of a look-up table routing engine offering flexible routing and switching polices without performance degradation unlike those based on microprocessors. By deciding contents of look-up tables, the engine can implement wormhole routing, virtual cut-through routing, and packet switching, as well as hybrid switching, under a variety of routing algorithms. Since the routing engine has a piplelined look-up table architecture, the routing delay is as small as one flit, and thus it can overlap multiple routing actions without performance degradation in comparison with hardwired routers dedicated to a specific policy. Because four pipeline stages do not induce a hazard, expensive forwarding logic is not required. The routing engine can accommodate four physical links with a time shared cut-through bus or single link with a cross-bar switch. It is implemented using Xilinx 4000 series FPGA.

• Journal of KIISE
• /
• v.44 no.3
• /
• pp.253-260
• /
• 2017

In computer graphics, high-quality lens flares have been generated using costly offline rendering. A recent matrix-based approximation has enabled generation of high-quality lens flares suitable for real-time applications, but its quality degrades due to the lack of nonlinear patterns of lens flares. This paper introduces a method for high-quality lens-flare rendering, which includes blending of both nonlinear as well as linear patterns. The nonlinear patterns are pre-rendered or photo-graphically captured offline and stored in a look-up table. The online stage reads only the pattern by looking up the table using a light angle, hence making its performance drop negligible while greatly improving the quality.