• 한국도로학회논문집
• /
• 제16권6호
• /
• pp.95-104
• /
• 2014

PURPOSES : The purpose of this study is to evaluate the degree of restraint (DOR) of longitudinal steel at continuously reinforced concrete pavement (CRCP) against environmental loadings. METHODS : To measure the longitudinal steel strain, 3-electrical resistance and self-temperature compensation gauges were installed to CRCP test section (thickness = 250mm, steel ratio = 0.7%) and continuously measured 10 min. intervals during 259 days. In order to properly analyze the steel strains first, temperature compensation process has been conducted. Secondly, measured steel strains were divided into 12 phases with different events such as before paving, during concrete hardening, and after first cracking, etc. RESULTS : Thermal strain rate (TSR) concept is defined as the linear strain variations with temperature changes and restraints rate of longitudinal steel against environmental loadings (especially thermal loading) with different cases is defined as degree of restraint(DOR). New concept of DOR could be indirect indicator of crack width behaviors of CRCP. CONCLUSIONS : Before paving, DOR of longitudinal steel is almost same at the coefficient of thermal expansion of steel ($12.44m/m/^{\circ}C$) because of no restraint boundary condition. After concrete pouring, DOR is gradually changed into -1 due to concrete stiffness developing with hydration. After first cracking at crack induced area, values of DOR are around -3~-5. The negative DOR stands for the crack width behavior instead of steel strain behavior. During winter season, DOR reached to -5.77 as the highest, but spring this values gradually reduced as -1.7 as the lowest. Based on this observation, we can presume crack width decreased over time within the time frame of this study. This finding is not consistent with the current theory on crack width variations over time, so further study is necessary to identify the causes of crack width reducing. One of the reasons could be related to concrete stress re-distribution and stress relaxation.

• 대한토목학회논문집
• /
• 제11권1호
• /
• pp.29-36
• /
• 1991

장섬유 강화 마그네슘 복합제(FP/ZE41A)의 피로 균열 성장 거동에 대한 열처리 효과를 규명한 것으로 TEM관측에 의해 알루미나 섬유와 마그네슘 복합 매트릭스간의 상호 접변을 완화시키기 위하여 풀림을 실시하였다. 피로 균열 성장 방향에 수직한 섬유와 평행한 섬유들에 대한 피로 균열 성장 거동에 관한 실험을 실시 한 바, 피로 균열 성장 방향에 수직한 시험편의 경우 열처리를 실시한 시험편은 잔류 응력을 제거시키지 않은 시험편에 비해 피로 균열 성장에 대한 더 많은 저항성을 갖고 있음을 알수 있었다. 그러나, 이에 반해 피로 균열 성장 방향에 평행한 시험편의 경우는 잔류 응력을 제거시키지 않은 시험편 이 열처리를 실시한 시험편에 비해 더 많은 피로 균열 성장 저항성을 내포하고 있다는 피로 균열 성장 거동에 대한 차이점을 발견할 수 있었다. 피로 파괴 표면에 대한 연성 파열과 섬유 박리를 SEM관찰한 결과 열처리는 피로균열 성장 거동에서 지적된 바와 같이 섬유와 매트릭스 상호면의 강도를 약화시킨다는 것을 알 수 있었다.

• 화약ㆍ발파
• /
• 제30권2호
• /
• pp.77-85
• /
• 2012

본 시공사례는 목포에 위치한 한국제분 14기 Silo를 연속적 발파해체를 수행한 것이다. 주변현황을 고려하여 붕괴방향은 종방향으로 계획을 수행하였고, 좁은 공간에서 1기 Silo 당 발파 공수가 많아서 발파에 의한 Cut-off 문제, 거동에 관한 문제 및 구조물이 거동 후 파쇄에 대한 문제점이 고려되었다. 이에 14기의 Silo를 2차로 구분하여 발파를 하였다. 1차 A-Section 발파에서는 연결용 도폭선의 Cut-off 인하여 2회 발파를 수행하여 붕괴를 시키고, 이를 개선하여 2차 B-Section 발파 때에는 한 번에 원하는 방향으로 안전하게 시공한 사례이다.

• International Journal of Aeronautical and Space Sciences
• /
• 제8권1호
• /
• pp.32-45
• /
• 2007

The T-50 advanced supersonic jet trainer employs the Relaxed Static Stability (RSS) concept to improve the aerodynamic performance while the flight control system stabilizes the unstable aircraft and provides adequate handling qualities. The T-50 flight control laws employ a proportional-plus-integral type controller based on a dynamic inversion method in longitudinal axis and a proportional type controller based on a blended roll system with simple roll rate feedback and beta-betadot feedback system. These control laws are verified by flight tests with various maneuver set flight envelopes and the control laws are updated to resolve flight test issues. This paper describes several concepts of flight control laws used in T-50 to resolve those flight test issues. Control laws for solving the roll-off problem during pitch maneuver in asymmetric loading configurations, improving the departure resistance in negative angle of attack conditions and enhancing the fine tracking performance in air-to-air tracking maneuvers are described with flight test data.

• Smart Structures and Systems
• /
• 제13권4호
• /
• pp.659-683
• /
• 2014

The static analysis of structures with arbitrary cross-section geometry and material lamination via a refined one-dimensional (1D) approach is presented in this paper. Higher-order 1D models with a variable order of expansion for the displacement field are developed on the basis of Carrera Unified Formulation (CUF). Classical Euler-Bernoulli and Timoshenko beam theories are obtained as particular cases of the first-order model. Numerical results of displacement, strain and stress are provided by using the finite element method (FEM) along the longitudinal direction for different configurations in excellent agreement with three-dimensional (3D) finite element solutions. In particular, a layered thin-walled cylinder is considered as first assessment with a laminated conventional cross-section. An atherosclerotic plaque is introduced as a typical structure with arbitrary cross-section geometry and studied for both the homogeneous and nonhomogeneous material cases through the 1D variable kinematic models. The analyses highlight limitations of classical beam theories and the importance of higher-order terms in accurately detecting in-plane cross-section deformation without introducing additional numerical problems. Comparisons with 3D finite element solutions prove that 1D CUF provides remarkable three-dimensional accuracy in the analysis of even short and nonhomogeneous structures with arbitrary geometry through a significant reduction in computational cost.

• Steel and Composite Structures
• /
• 제45권2호
• /
• pp.219-230
• /
• 2022

The aim of this paper is to study the mechanical behaviors of the cold-formed thin-walled steel and reinforced concrete sandwich composite slab (CTS&RC-SCS) under vertical loads and to develop the calculation methods of its flexural bearing capacity and section stiffness. Two CTS&RC-SCS specimens were designed and manufactured to carry out the static loading test, and meanwhile, the numerical simulation analyses based on finite element method were implemented. The comparison between experimental results and numerical analysis results shows that the CTS&RC-SCS has good flexural capacity and ductility, and the accuracy and rationality of the numerical simulation analysis are verified. Further, the variable parameter analysis results indicate that neither increasing the concrete strength grade nor increasing the thickness of C-sections can significantly improve the flexural capacity of CTS&RC-SCS. With the increase of the ratio of longitudinal bars and the thickness of the composite slab, the flexural capacity of CTS&RC-SCS will be significantly increased. On the basis of experimental research and numerical analysis above, the calculation formula of the flexural capacity of CTS&RC-SCS was deduced according to the plastic section design theory, and section stiffness calculation formula was proposed according to the theory of transformed section. In terms of the ultimate flexural capacity and mid-span deflection, the calculated values based on the formulas and the experimental values are in good agreement.

• 한국전산구조공학회논문집
• /
• 제23권4호
• /
• pp.417-424
• /
• 2010

변단면을 갖는 FCM(Free Cantilever Method) 교량의 초기 설계단계에서 설계변경에 따른 반복적 작업에 대한 효율성 향상을 위하여 박스거더의 종방향 형상을 자동조정할 수 있도록 하는 파라메트릭 모델링 방법을 연구하였다. FCM 교량의 종방향 형상을 표현하기 위한 매개변수를 정의하였으며, 기존 FCM 교량의 설계 시 적용된 매개변수의 통계치 적용을 통해 매개변수들 간의 내재적, 외재적 구속조건 및 함수관계를 정의하였다. 정의한 구속조건 및 관계를 적용한 파라메트릭 모델링 구현을 통해 그 적용 가능성을 검증하였으며, 기존 설계된 교량을 대상으로 파라메트릭 모델링을 수행한 결과로 생성된 3차원 교량 모델의 콘크리트 물량과 대상교량의 설계문서 상의 물량 비교를 통해 모델의 정확성을 확인하였다.

• 한국식품과학회지
• /
• 제9권4호
• /
• pp.271-276
• /
• 1977

한우(韓牛)의 round muscke에 papain을 농도별(濃度別)로 증가(增加)시켜서 longitudinal section과 cross section하여 결체조직(結締組織)의 collagenous fibre와 elastic fibre를 각각(各各) 염색(染色)하여 현미경으로 관찰한 결과(結果)는 다음과 같다. 1. 효소(酵素) 농도(濃度)의 증가(增加)에 따라 비정형 상태로 뭉쳐져 있는 collagenous fibre는 점점 풀어지는 상태(狀態)를 지나 후에는 붕괴되며 또한 염색성(染色性)이 현저하게 약해졌다. 2. elastic fibre의 방향(方向)은 muscle fibre에 평행(平行)하게 존재(存在)하며 효소(酵素) 농도(濃度)의 증가(增加)에 따라 점차 탄성(彈性)을 잃고 loose헤지며 직선적(直線的)으로 보이고 fragment되는 것도 현저하다. 3. collagenous fibre와 elastic fibre 모두 효소(酵素) 처리구(處理區)가 대조구(對照區)에 비하여 조직변화(組織變化)가 현저하다.

• 한국도로학회논문집
• /
• 제19권1호
• /
• pp.63-72
• /
• 2017

PURPOSES : The purpose of this study is to investigate the fundamental behaviors such as stresses and deflections of the middle slab in a double-deck tunnel for the development of a middle slab design guide. METHODS : The middle slab has been divided into the following three different sections as according to its structural differences: the normal section, expansion joint section, and emergency passageway section. The normal section of middle slab represents the slab supported by brackets installed continuously along the longitudinal direction of tunnel lining. The expansion joint section refers to a discontinuity of middle slab due to the existence of a transverse expansion joint. The emergency passageway section has an empty rectangular space in the middle slab that acts as an exit in an emergency. The finite element analysis models of these three sections of middle slab have been developed to analyze their respective behaviors. RESULTS : The stresses and deflections of middle slab at the three different sections decrease as the slab thickness increases. The emergency passageway section yields the largest stresses and deflections, with the normal section yielding the smallest. CONCLUSIONS : The stress concentrations at the corners of the passageway rectangular space can be reduced by creating hunch areas at the corners. The stresses and deflections in the emergency passageway section can be significantly decreased by attaching beams under the middle slab in the passageway area.

• 한국지진공학회논문집
• /
• 제14권2호
• /
• pp.27-36
• /
• 2010

횡하중을 받는 RC 기둥의 전단강도는 기둥의 변위연성도가 증가함에 따라 감소하는 것으로 알려져 있다. 연성도의 증가에 따른 전단강도의 감소율은 초기전단강도에 따라 크게 좌우되므로 이를 합리적으로 예측하기 위해서는 초기전단강도의 평가가 매우 중요하다. 기둥의 전단거동은 단면모양, 형상비, 축력, 축방향철근비, 연성도 등 다양한 요인에 의하여 영향을 받아 복잡하다. 본 연구에서는 형상비, 단면의 중공비, 축방향철근비, 중공 및 중실단면을 변수로 하는 시험체를 제작하여 실험적 연구를 수행하여 전단거동특성을 살펴보았다. 또한, 축방향철근이 전단강도에 미치는 영향을 분석하여 형상비와 축력을 고려한 기존의 초기전단평가식을 보완하였으며, 그 타당성을 검증하였다.