• 한국도로학회논문집
• /
• 제16권6호
• /
• pp.59-67
• /
• 2014

PURPOSES : The purpose of this study is to analyse the longitudinal steel strain and stress of continuously reinforced concrete pavement(CRCP) with longitudinal and transverse direction at early age using stress dependent strain analysis method. METHODS : To measure the longitudinal steel strain, 9-electrical resistance and self-temperature compensation gauges were installed to CRCP test section (thickness = 250mm, steel ratio = 0.7%) and continuously measured 10min. intervals during 30days. In order to properly analyze the steel stress first, temperature compensation process has been conducted. Secondly, measured steel strains were divided into stress dependent strain (elastic strain) and stress independent strain (thermal strain) and then stress dependent strain was applied to stress calculation of longitudinal steels. RESULTS : Steel strains were successfully measured during 30days. To verify the accuracy of temperature compensation process, measured coefficient of thermal expansion(COTE,$11.46{\times}10^{-6}m/m/^{\circ}C$) of longitudinal steel before paving was compared with that of unrestrained steel. Max. steel stress in the transverse direction shows about 266MPa at 23days after placement. CONCLUSIONS : Steel stresses in the longitudinal and transverse direction have been evaluated. In longitudinal direction, steel stress from the crack was rapidly reduced from 183MPa at crack to 18MPa from 600mm apart the crack. From this observation, stress effective length can be identified as within 600mm apart from the crack. In transverse direction, max. stress point was located near the center of pavement width and stress level(266MPa) is about 66% of yield stress of steel.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 가을 학술발표회 논문집
• /
• pp.284-292
• /
• 1995

This paper is on experimental study on the behavior of reinforced concrete columns subjected to longitudinal steel ratio To investigate the effects of concrete strength and longitedinal steel ratio on the behavior of reinforced concrete columns. a series of tests were carried out for thirty-six tied reinforced concrete columns with a 100mm square cross section and three slendemess ratio of 15, 30 and 50. And To study and illustrate the change of the ultimate loads and that of displacements, two different concrete strength of 180,26kfg/$\textrm{cm}^2$, 819,36kfg/$\textrm{cm}^2$ and five different longitudinal steel ratio of 0.5, 1.0, 4.0, 5.7 and 10.3% were used. The boundary conditions at the ends were both hinged and the end eccentricities (17mm) were equal and of the same sign. While the ultimate load capacity of high-strength concrete column was much increased when the columns were short, that was not when the columns were slender. The effect of longitudinal steel ratio on the increased of ultimate load of column was more evident for slender columns than for short ones and the ultimate of longitudinal steel ratio were more pronounced with increasing concrete strength. The more inserted the longitudinal steel, the more increased the ultimate load, but the superabundance of longitudinal steel ratio over the limitation of maximum steel ratio in ACI code was used, it was showed that the ultimate load was rather decreased.

• Steel and Composite Structures
• /
• 제38권6호
• /
• pp.657-670
• /
• 2021

This paper presents a designing method for enhancing fire resistance of steel box bridge girders (closed steel box bridge girder supporting a thin concrete slab) through taking into account such parameters namely; fire severity, type of longitudinal stiffeners (I, L, and T shaped), and number of longitudinal stiffeners. A validated 3-D finite element model, developed through the computer program ANSYS, is utilized to go over the fire response of a typical steel box bridge girder using the transient thermo-structural analysis method. Results from the numerical analysis show that fire severity and type of longitudinal stiffeners welded on bottom flange have significant influence on fire resistance of steel box bridge girders. T shaped longitudinal stiffeners applied on bottom flange can highly prevent collapse of steel box bridge girders towards the end of fire exposure. Increase of longitudinal stiffeners on bottom flange and web can slightly enhance fire resistance of steel box bridge girders. Rate of deflection-based criterion can be reliable to evaluate fire resistance of steel box bridge girders in most fire exposure cases. Thus, T shaped longitudinal stiffeners on bottom flange incorporated into bridge fire-resistance design can significantly enhance fire resistance of steel box bridge girders.

• 한국공간구조학회논문집
• /
• 제7권1호
• /
• pp.63-70
• /
• 2007

최근 복잡해진 도심지의 토지 이용률을 높이기 위하여 원형 강교각이 건설이 요구되고 있다. 원형강교각의 경우 줄어든 단면으로 좌굴 내하력이 감소하며 이에 대한 방안으로 수직 보강재의 적용을 고려할 수 있다. 그러나 수직보강재를 적용한 원형 강교각의 좌굴 내하력의 증가의 효과에 대해서는 아직 명히 파악되지 않았다. 본 연구에서는 먼저 탄소성 유한요소해석 통하여 보강재를 적용하지 않은 무보강 원형 강교각과 수직보강재가 보강된 원형 강교각에 대해서 좌굴내하력을 검토하였다. 그리고, 형상비(R/t)에 따른 좌굴내하력의 변화를 기존의 실험식과 비교하여 그 효과를 검토하였다. 그리고 원형강교각의 수직 보강재를 적용하여 폭과 두께에 따른 좌굴 내하력을 비교 검토하였다. 그리고 수직 보강재를 적용한 원형 강교각에 대한 내진성능을 검토하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.553-558
• /
• 2001

Recent destructive seismic events demonstrated the importance of mitigating human casualties and serious property damages in design and construction of structures. The Korean Bridge Design Specifications (1992) adopted seismic design requirements based on the AASHTO specification, and minor modification was made in 2000. The longitudinal steel connection of reinforced concrete bridge column is sometimes practically unavoidable. The longitudinal reinforcement details affect seismic performance such as flexural failure and shear failure. This research aims to develop longitudinal steel connection details with confinement steel by experimental study for seismic performance of reinforced concrete bridge columns. Quasi-static test under three different axial load levels was conducted for 12 spiral column specimens. All the column specimens had the same aspect ratio of 3.5. The column specimens were transversely reinforced with spiral and with five different longitudinal steel connection. The final objective of this study is to suggest appropriate longitudinal reinforcement connection details for the limited ductility design concept and improve construction quality.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 춘계학술대회 논문집
• /
• pp.345-352
• /
• 2001

Recent destructive seismic events demonstrated the importance of mitigating human casualties and serious property damages in design and construction of structures. The Korean Bridge Design Specifications (1992) adopted seismic design requirements based on the AASHTO specification, and minor modification was made in 2000. The longitudinal steel connection of reinforced concrete bridge column is sometimes practically unavoidable. The longitudinal reinforcement details affect seisimc performance such as flexural failure and shear failure. This research aims to develop longitudinal steel connection details with confinement steel by experimental study for seismic performance of reinforced concrete bridge columns. Quasi-static test under three different axial load levels was conducted for 12 spiral column specimens. All the column specimens had the same aspect ratio of 3.5. The column specimens were transversely reinforced with spiral and with five different longitudinal steel connection. The final objective of this study is to suggest appropriate longitudinal reinforcement connection details for the limited ductility design concept and improve construction quality.

• 한국강구조학회 논문집
• /
• 제16권5호통권72호
• /
• pp.653-660
• /
• 2004

도심지의 토지 이용률을 높이기 위하여 상대적으로 단면이 작은 원형 강교각의 건설이 요구되고 있다. 이때 줄어든 단면으로 인해 감소된 좌굴내하력을 높이는 방안으로 수직보강재의 적용을 고려할 수 있다. 그러나 수직보강재를 적용함으로써 얻어질 수 있는 좌굴내하력의 증가효과는 아직 명확하지 않다. 본 연구에서는 기하학적, 재료학적 비선형을 고려한 탄소성 유한요소해석을 수행하여 원형강교각의 반지름-두께비에 따른 수직보강재의 수가 좌굴내하력에 미치는 영향을 명확히 하였다. 또한, 수직보강재의 폭과 두께, 원형강교각의 세장비에 따른 좌굴해석을 수행하여 그 관계를 명확히 하였다.

• 콘크리트학회논문집
• /
• 제16권1호
• /
• pp.111-124
• /
• 2004

축방향철근의 연결상세에 따라 7개 그룹 총 21개의 원형나선철근 기둥 시험체를 제작하여 준정적 실험을 수행하였다. 축방향철근 연결상세(단일철근, 겹침이음 및 기계적연결), 심부구속철근비, 축력비 등을 주요 실험변수로 채택하였으며 실험결과 축방향철근 연결상세에 따라 다른 파괴거동을 나타내었고, 내진성능에서도 차이를 나타내었다. 축방향철근이 겹침이음된 시험체의 실험결과, 모든 축방향철근이 겹침이음된 시험체는 내진성능이 상당히 저하되는 것으로 나타났으나, 축방향철근의 $50\%$가 겹침이음된 시험체의 경우 제한적이지만 한정적인 연성능력을 나타내었다. 또한, 축방향철근을 커플러를 사용하여 기계적으로 연결한 시험체는 축방향철근이 단일철근으로 구성된 시험체와 유사한 파괴거동 및 강도저감거동을 나타내었다.

• 콘크리트학회논문집
• /
• 제16권2호
• /
• pp.249-260
• /
• 2004

철근콘크리트 교각의 소성힌지 구간에서의 축방향철근의 겹침이음은 내진성능면에서 바람직하지 않으나, 축방향철근의 겹침이음을 피하는 철근상세가 현실적으로 어려운 실정이며 현행 도로교설계기준에는 축방향철근 겹침이음 금지에 관한 특별한 설계기준이 없는 상태이다. 본 연구는 반복하중을 받는 철근콘크리트 원형교각의 축방향철근 연결상세에 따른 내진성능을 평가하기 위해 축방향철근 연결상세에 따른 7개 그룹 총 21개의 원형나선철근 기둥 시험체에 대한 준정적실험을 수행하였다. 실험결과 축방향철근이 겹침이음 되어있는 시험체의 경우, 단일 축방향철근으로 구성된 시험체보다 낮은 내진성능을 나타내었으며 특히, 모든 축방향철근이 겹침이음 되어있는 경우 내진성능이 상당히 저하되었다. 그러나, 축방향철근을 기계적 연결장치로 연결한 시험체의 경우 단일축방향철근 상세를 가지는 시험체와 유사한 내진성능을 나타내었다. 본 연구의 최종목적은 철근콘크리트 교각의 시공성 향상을 위한 축방향철근 연결상세의 제시 및 한정연성 내진설계를 위한 실험적 기초자료의 제공과 함께 성능단계별 축방향철근 연결상세에 따른 성능 및 손상평가를 위한 정량적 수치와 경향을 제공하기 위한 것이며, 극한변위, 극한드리프트비율, 변위연성도, 응답수정계수, 등가점성감쇠비, 잔류변형지수, 유효강성 등의 주요 내진성능평가 변수들에 대한 분석결과를 나타내었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.477-482
• /
• 2001

This paper is to study the effect of longitudinal reinforcement ratios and axial deformation on the frame analysis in reinforced concrete(RC) columns and to investigate the effect of confined concrete core, the length-width ratio and longitudinal steel ratios on frame analysis in Concrete-Filled steel Tubular(CFT) columns. An equation if derived to evaluate the modulus of elasticity for core concrete. The 34 reference data have been collected for the purpose and are processed by the mean of a multiple regression analysis technique. The equation and longitudinal reinforcement ratios was applied to RC columns for structural analysis. Then, the difference of beam moment was identified. In general, the results of analysis was indicated reasonable differences in beam moment, in case of longitudinal reinforcement ratios applied to RC columns when compared with the plain concrete columns. In CFT columns the equation was also applied in order to the effect of confined concrete core on structural analysis. Beam moment was increased as volumetric ratio of lateral steel was decreased. The effect of longitudinal steel ratios was investigated in CFT columns and was confirmed beam moment variety. The result was appeared reasonable difference in beam moment as longitudinal steel was increased.