• Proceedings of the KWS Conference
• /
• 2003.05a
• /
• pp.263-265
• /
• 2003

The transverse crack, a type of cold crack, occurs perpendicular to the axis of the weld interface, longitudinal residual stresses ($\sigma$k direction) are more important in transverse crack occurrence from my own experience. Specimens were fabricated and welded under actual construction conditions, and then residual stresses of longitudinal stresses were measured for different welding conditions with SAW and FCAW process. The residual stress values for the specimen welded Interpass temperature below 30$^{\circ}C$ was higher than the specimen welded interpass temperature of 100～120$^{\circ}C$. And also the residual stress values for a specimen measured at weld surface, as welded condition, was higher than that of longitudinal residual stresses that was measured from a small test piece, due to the residual stress was relieved in the process of the cutting and machining. Transverse weld cracks were detected in the area of the maximum residual stresses both SAW and FCAW process.

• Communications for Statistical Applications and Methods
• /
• v.27 no.2
• /
• pp.241-254
• /
• 2020

This study proposes generalized models of joint latent class analysis (JLCA) for longitudinal data in two approaches, a JLCA with latent profile (JLCPA) and a JLCA with latent transition (JLTA). Our models reflect cross-sectional as well as longitudinal dependence among multiple latent classes and track multiple class-sequences over time. For the identifiability and meaningful inference, EM algorithm produces maximum-likelihood estimates under local independence assumptions. As an empirical analysis, we apply our models to track the joint patterns of adolescent depression and anxiety among US adolescents and show that both JLCPA and JLTA identify three adolescent emotional well-being subgroups. In addition, JLCPA classifies two representative profiles for these emotional well-being subgroups across time, and these profiles have different tendencies according to the parent-adolescent-relationship subgroups.

• (The)Korea Educational Review
• /
• v.23 no.1
• /
• pp.205-230
• /
• 2017

Drawing on third to fifth wave data from the Longitudinal Study of North Korean Migrant Youths' Education, we examined the longitudinal relationship between social capital of North Korean Migrant Youths and school adjustment using latent growth modeling(LGM). Specifically, we sought to answer the following research questions: Do social capital and school adjustment among North Korean Migrant Youths change over time? Is there a relationship between the changes in social capital and school adjustment among these students? Our LGM results showed that trends in social capital and school adjustment among these students were not fixed but changed over time. While the social capital developed by these students was found to influence school adjustment at the time of its development, it did not continue to influence changes in school adjustment over time. Changes in school adjustment of North Korean migrant youths were affected by changes in social capital. These results suggest that there is room for gradual improvement of school adjustment level by strengthening social capital of North Korean migrant youths.

• The korean journal of orthodontics
• /
• v.19 no.1 s.27
• /
• pp.137-151
• /
• 1989

To help arrive at a more accurate diagnosis of anteroposterior apial base relationship on each individual case, it is important to compare the interpretation in the same population on a longitudinal basis. The author studied on the changes of the anteroposterior apical base relationship using serial lateral cephalometric roentgenograms of 15 boys and 27 girls aged from 6 to 13 years of Korean children. Following results were obtained 1. Norms of Korean boys and girls were established. 2. With ages, there was a gradual decrease of ANB, AXB angle, and there was a gradual increase of facial angle, A-B plane angle, APDI. 3. Wits appraisal does not change significantly with ages. 4. No significant differences were observed in the changes between male and female subjects for all absolute values between the ages of 6 years and 12 years, but significant differences were observed in ANB, AXB, A-B plane angle of the age of 13 years. No significant differences were observed in the changes between male and female subjects for all incremental values between the ages of 6 years and 13 years.

• Journal of the Korean Home Economics Association
• /
• v.50 no.2
• /
• pp.75-84
• /
• 2012

The purpose of this study was to examine the relationship between infants' turn-taking and vocabulary development during a one-year longitudinal study. Participants of this study included 46 infants who participated in both of the 1st and the 2nd tests. The infants' turn-taking frequencies were observed during mother-infant's free play for 10 minutes. The infants' vocabulary was investigated with MCDI-K for the 1st test and PRES for the 2nd test. The collected data were analyzed using both t-test and Pearson's correlation. The research results were as follows: First, the turn-taking frequencies and vocabulary of infants increased with age groups. Second, there was positive relationship between the turn-taking and the receptive vocabulary in group A at T1. Third, there were significant differences in receptive vocabulary at T1 and expressive vocabulary at T2 among group A according to the infants' turn-taking levels.

• Structural Engineering and Mechanics
• /
• v.56 no.2
• /
• pp.275-291
• /
• 2015

Adherence between reinforcement and the surrounding concrete is usually ignored in finite element analysis (FEA) of reinforced concrete (RC) members. However, load transition between the reinforcement and surrounding concrete effects RC members' behavior a great deal. In this study, the effects of bond-slip on the FEA of RC members are examined. In the analyses, three types of bond-slip modeling methods (perfect bond, contact elements and spring elements) and three types of reinforcement modeling methods (smeared, one dimensional line and three dimensional solid elements) were used. Bond-slip behavior between the reinforcement and surrounding concrete was simulated with cohesive zone materials (CZM) for the first time. The bond-slip relationship was identified experimentally using a beam bending test as suggested by RILEM. The results obtained from FEA were compared with the results of four RC beams that were tested experimentally. Results showed that, in FE analyses, because of the perfect bond occurrence between the reinforcement and surrounding concrete, unrealistic strains occurred in the longitudinal reinforcement. This situation greatly affected the load deflection relationship because the longitudinal reinforcements dominated the failure mode. In addition to the spring elements, the combination of a bonded contact option with CZM also gave closer results to the experimental models. However, modeling of the bond-slip relationship with a contact element was quite difficult and time consuming. Therefore bond-slip modeling is more suitable with spring elements.

• Journal of the Korea Concrete Institute
• /
• v.28 no.3
• /
• pp.279-288
• /
• 2016

The present study simplified the moment-curvature relationship to straightforwardly determine the flexural behavior of reinforced concrete (RC) columns. For the idealized column section, moments and neutral axis depths at different stages(first flexural crack, yielding of tensile reinforcing bar, maximum strength, and 80% of the maximum strength at the descending branch) were derived on the basis of the equilibrium condition of forces and compatibility condition. Concrete strains at the extreme compression fiber beyond the maximum strength were determined using the stress-strain relationship of confined concrete, proposed by Kim et al. The lateral load-displacement curves converted from the simplified moment-curvature relationship of columns are well consistent with test results obtained from column specimens under various parameters. The moments and the corresponding neutral axis depth at different stages were formulated as a function of longitudinal reinforcement and transverse reinforcement indices and/or applied axial load index. Overall, curvature ductility of columns was significantly affected by the axial load level as well as concrete compressive strength and the amount of longitudinal and transverse reinforcing bars.

• Korean Journal of Child Studies
• /
• v.22 no.4
• /
• pp.17-32
• /
• 2001

The purpose of this study was to explore the developmental patterns of self-concept of pre-adolescents and adolescents by using the longitudinal data originated by the Korean Institute for Research in the Behavioral Sciences (KIRBS). Specifically, using Structural Equation Modeling (SEM), the effects of parents and peer groups on the stability and change of self-concept were examined across a 9-year-period. The subjects were 62 children(29 boys and 33 girls) from the KIRBS longitudinal data. The results showed that, peer relationships revealed consistent effects on children's self-concept from pre-adolescence to mid-adolescence. In particular, this influence was most evident at 7 years of age and at 16 years of age. However, parental influence was almost non-existent for 7-year-olds, equivalent to peer relationships for 10-year-olds, and decreased for 16-year-olds. On the whole, parental and peer influence on self-concept gradually decrease in adolescence. Nevertheless, parental and peer influence continue to maintain a certain level of influence from childhood to adolescence. This study provides an understanding of developmental change and stability in the self-concept of Korean adolescents.

• Transactions of Materials Processing
• /
• v.22 no.7
• /
• pp.401-406
• /
• 2013

The use of roll-formed products increases every year due to its advantages, such as high production rates, reduced tooling cost and improved quality. However, till now, it is limited to part profiles with constant cross section. In recent years, the flexible roll forming process, which allows variable cross sections of profiles by adaptive roll stands, was developed. In this study, an attempt to optimize profile design for the flexible roll forming process was performed. An equation that predicts the longitudinal strain for part geometries with variable cross-sections was proposed. The relationship between geometrical parameters and the longitudinal strain was analyzed and investigations on the optimal profile design were performed. Experiments were conducted with a lab-scale roll forming machine to validate the proposed equation. The results show that the profile design method proposed in this study is feasible and parts with variable cross sections can be successfully fabricated with the flexible roll forming process.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.12
• /
• pp.600-604
• /
• 2014

Longitudinal heat conduction is known to be an important factor in the design of a printed circuit heat exchanger(PCHE) for cryogenic applications. Parasitic heat conduction through the heat exchanger frame needs to be considered because it is known to decrease the effectiveness of the heat exchanger. In this paper, a conjugate heat transfer problem in a simple counter-flow PCHE is analyzed by a computational fluid dynamics simulation. The effect of longitudinal conduction in a straight channel is compared with the theoretical effectiveness-NTU relationship that assumes a "thin" heat exchanger frame. The calculation results suggest that the theoretical model is valid in the present calculation conditions where NTU is < 13.