• 한국측량학회지
• /
• 제29권3호
• /
• pp.283-291
• /
• 2011

측량용 카메라의 경우에는 내부표정을 위해 사진지표 뿐만 아니라 렌즈에 관련된 다양한 매개변수들이 제작사의 정밀 검정을 통해 제공된다. 반면에 비측량용 카메라는 정확한 위치를 알고 있는 다수의 기준점을 이용하여 사용자가 직접 카메라 검정을 통해 내부표정요소를 구하여야 한다. 측량용 카메라는 한번 검정된 내부표정 결과를 장기간 지속적으로 활용하고 있는 것에 반하여, 비측량용 카메라의 경우에는 아직까지 장기간에 따른 내부표정요소의 안정성이 충분히 규명되지 않은 상태이다. 따라서, 비측량용 카메라의 경우 사전측량작업을 할 때마다 내부표정요소를 구하기 위한 작업을 별도로 수행하는 경우가 많다. 이는 다량의 기준점을 이용해야 하므로 매우번거로운 작업이며, 비측량용 카메라의 활용에 장애가 되어 왔다. 본 연구에서는 일반 디지털 카메라에 대해 6개월간에 걸쳐 25회의 카메라 검정과 관측을 주기적으로 실험하여 내부표정요소를 구하고, 이를 분석함으로써 비측량용 카메라의 내부표정요소가 장기간 동안 어느 정도 안정한지를 검토하였다.

• 한국분말재료학회지
• /
• 제25권5호
• /
• pp.395-401
• /
• 2018

The improvement of dispersion stability for the primary polishing slurry in a CMP process is achieved to prevent defects produced by agglomeration of the slurry. The dispersion properties are analyzed according to the physical characteristics of each silica sol sample. Further, the difference in the dispersion stability is confirmed as the surfactant content. The dispersibility results measured by Zeta potential suggest that the dispersion properties depend on the content and size of the abrasive in the primary polishing slurry. Moreover, the optimum ratio for high dispersion stability is confirmed as the addition content of the surfactant. Based on the aforementioned results, the long-term stability of each slurry is analyzed. Turbiscan analysis demonstrates that the agglomeration occurs depending on the increasing amount of surfactant. As a result, we demonstrate that the increased particle size and the decreased content of silica improve the dispersion stability and long-term stability.

• 생약학회지
• /
• 제44권2호
• /
• pp.200-208
• /
• 2013

The aim of this study was to evaluate the shelf-life of Bojungikgi-tang (Buzhongyiqi-tang in Chinese) by long-term storage test. Experiments were performed to evaluate the stability such as the selected physicochemical, pH, identification, heavy metal, microbiological experiment, and amount of marker compounds under a long-term storage test of Bojungikgi-tang decoction. The significant change was not showed in pH, heavy metal, microbiological, and identification test based on long-term storage test. Furthermore, the HPLC analysis was performed for the determinations of liquiritin, glycyrrhizin, nodakenin, and hesperidin in Bojungikgi-tang by long-term storage test. We were calculated shelf-life of Bojungikgi-tang decoction based on the amount change of four constituents. Consequently, Shelf-life by four compounds at room temperature was predicted 23 month. The suggested shelf-life would be helpful on the storage and distribution of herbal medicine.

• 생약학회지
• /
• 제43권3호
• /
• pp.257-264
• /
• 2012

The purpose of this study was to estimate the shelf-life of Ssanghwa-tang by long-term storage test. Experiments were conducted to evaluate the stability such as the selected physicochemical, pH, identification, heavy metal, microbiological experiment under a long-term storage test of Ssanghwa-tang. The significant change was not showed in pH, heavy metal, microbiological, identification test and quantitative analysis based on long-term storage test. The contents of albiflorin, paeoniflorin, cinnamic acid, liquiritin, and glycyrrhizin in long-term storage test were 66.8-93.1 ${\mu}g/mL$, 429.0-495.0 ${\mu}g/mL$, 3.8-4.4 ${\mu}g/mL$, 32.0-38.1 ${\mu}g/mL$, and 66.8-71.7 ${\mu}g/mL$, respectively. Shelf-lifes by 5 compounds about 3 lots at room temperature were predicted 21-37, 14-21, and 16-72 months, respectively. The suggested shelf-life would be helpful on the storage and distribution of herbal medicine.

• Tribology and Lubricants
• /
• 제34권5호
• /
• pp.197-207
• /
• 2018

Thermal deterioration of fuel due to long-term storage influences engine performance and causes malfunctions. Fuel stability is usually evaluated via heat resistance and thermal stability during a brief heat shock at high temperature; storage stability in this scenario means that there is very little change in the quality of the fuel during long-term storage. In addition, rubber-based products such as oil seals, O-rings, and rubber hoses can influence the quality of the fuel. When these rubber products are in contact with fuel, they can swell, mechanically weaken, and occasionally crack, thus leaking low molar weight rubber and additives including plasticizer and antioxidant into the fuel to degrade its properties and shorten its useful lifetime. This study determines the thermal stabilities of three kinds of synthetic fuels by evaluating their low temperature kinematic viscosities, chemical composition changes via GC analyses, gross heat of combustion, and color changes. We evaluate the compression set of O-rings by immersing one NBR and two FKM rubber O-rings in the three synthetic fuel samples in airtight containers at variable storage temperatures for six months; from this, we estimate the lifetimes of the O-rings using the Power law model. There were very little changes in the chemical compositions and gross heat of combustion after six months of the experiment. The lifetimes are thus dependent on the materials of the rubber products, and in particular, the FKM O-ring was calculated to have a theoretical lifetime of 200 to 5,700 years. These results indicate that the synthetic fuels maintain their physical properties even after long-term storage at high temperatures, and the FKM O-ring is suitable for long-term sealing of these fuels.

• 한국의학물리학회지:의학물리
• /
• 제13권3호
• /
• pp.109-113
• /
• 2002

본 연구에서는 의료용선형가속기의 기기점검을 위한 일목요연하고 장기간의 통계처리가 가능한 새로운 정도관리 양식을 개발하였다. 개발된 양식을 2001년 8월부터 12월까지 국내의 6개의 기관에 적용하여 그 양식의 효율성을 평가하였다. 기존의 점검 양식은 단순히 선형가속기에 숫자로 표시되는 값들(digital data)과 측정장치를 이용하여 관찰된 값들(mechanical data)의 비교에 목적을 두고 있고, 각 항목들이 서술적으로 나열되어 있어 공간적으로 문제점을 파악하기 어렵다. 더욱이 기기의 장기간에 걸친 오차의 변화를 일목요연하게 알 수가 없다. 그러나 새로 개발된 점검 양식을 사용한다면, 디지털 데이터와 기계적 데이터의 비교는 물론 기기의 오차를 공간적으로 파악할 수 있게 될 것이다. 또한 기기의 장기간에 걸친 오차의 범위를 확인하게 되어 기기의 장기적 안정성을 알 수 있게 될 것이다. 뿐만 아니라 현실에 맞는 항목을 선택함으로써 기계적 정도관리(mechanical QA)를 수행하는 시간을 단축함과 동시에, 각 기관이 보유하고 있는 선형가속기의 장기간에 걸친 정도관리를 통해 얻은 데이터를 이용하여 치료장비의 오차에 대한 통계적, 물리적 데이터를 정도관리 직후 분석할 수 있게 되어 방사선 치료에 있어서 매우 중요한 요소인 방사선 치료장비의 기기적 정확성을 높일 수 있게 될 것이다.

• KDI Journal of Economic Policy
• /
• 제43권2호
• /
• pp.81-101
• /
• 2021

This paper estimates the expectation-augmented Phillips curve, which explains inflation dynamics, in Korea. The phenomenon of low inflation in Korea has been going on for quite some time, in particular since 2012. During the Covid-19 crisis, due to low inflation expectations the operation of monetary policy was limited as the base rate approached the zero lower bound. The main objective of this paper is to estimate where and how tightly inflation expectations are anchored. It was found that long-term inflation expectations fell to around 1%, falling short of the inflation target, and that inflation expectations are strongly anchored to long-term expectations, which implies that the low inflation phenomenon is likely to extend into the future. The results also imply that even if inflation fluctuates due to temporary disturbances, it may converge to a level below the inflation target. The slight rebound of long-term expectations during the Covid-19 crisis suggests that the aggressive monetary policy may have contributed to improving economic agents' beliefs about the commitment of monetary authorities to inflation stability. This may also help long-term expectations gradually to approach the inflation target.

• 대한수학회논문집
• /
• 제29권4호
• /
• pp.505-518
• /
• 2014

Considered here is the first initial boundary value problem for the two-dimensional g-Navier-Stokes equations in bounded domains. We first study the long-time behavior of strong solutions to the problem in term of the existence of a global attractor and global stability of a unique stationary solution. Then we study the long-time finite dimensional approximation of the strong solutions.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제12권2호
• /
• pp.9-20
• /
• 1990

A series of 19 cases with maxillary hyperplasia and mandibular retrognathia were operated on by simultaneous superior repositioning of the maxilla after Le Fort I osteotomy and anterior repositioning of the mandible after bilateral sagittal split ramus osteotomies with or without osteotomy of the inferior border of the mandible. These were evaluated by retrospective cephalometric and computer analysis for the longitudinal skeletal and dental changes for an average of 17.1 months after surgery. For stabilization of the osteotomized segments, the authors used wire osteosynthesis by means of bilateral infraorbital and zygomatic buttress suspension wire at the maxilla, and direct interosseous wire at the split segments of the mandibular rami. Results show generally good stability after simultaneous maxillary and mandibular surgery with wire osteosynthesis, and a minimal to moderate tendency toward skeletal and dental relapse. This article is a preliminary study to defy the efficiency of the wire osteosynthesis (wo)compared with rigid internal fixation (RIF) for simultaneous maxillary and mandibular surgery. 1. The vertical relapse rate of the A point after superior repositioning of the maxilla is 2.2%. 2. The horizontal relapse rate of the B point after advancement of the mandible is 18.3%. 3. The condyle is distracted inferiorly and slightly posteriorly at the immediate postoperative period. 4. At the long term follow up examination, the condyle presents tendency of return to the preoperative position. 5. Condylar segment angle is decreased at the immediate postoperative period, and at the long term follow up evaluation, the angle is increased. 6. Gonial angle is increased at the immediate postoperative period, and then is decreased at the long term follow up evaluation. 7. The dentition is satisfactory with acceptable movement at the long term follow up evaluation. 8. At the mandibular free body analysis, genioplasty shows good stability. 9. Wire osteosynthesis provides excellent stabilization for the simultaneous maxillary and mandibular surgery.

• 대한치과의사협회지
• /
• 제37권4호통권359호
• /
• pp.287-293
• /
• 1999

Long-term posttreatment stability is great concern to all orthodontist. So, this article was disussed that etiology of relapse, classificatioan of retention, duration of retention and treat after relapse. The most important thing about stability was considered that growth pattern, periodontal remodeling, neuromuscular factors and applied the appropriate mechanotherapy. Retenton was considered during the treatment planning and required considerable analytic thought.