• Korean Institute of Interior Design Journal
• /
• v.26 no.4
• /
• pp.22-29
• /
• 2017

This paper investigates the evaluation criteria in order to manage healing environment of long-term care elderly hospital. Elderly hospital evaluation tool developed by Korean Government is used to assess elderly hospital facilities to check the hospital facility and maintain its quality. However, the evaluation indicators and questions mainly focusing on safety indicators. Some questions are too vague for precise evaluation. In this paper, we discuss the advantages and disadvantages of the present evaluation criteria to establish new assessment tool for precise evaluation. The literature research was conducted tp set up the new evaluation criteria. From this research, we developed an elderly focusing on healing environment checklist for elderly care hospital which contains 7 factors as the primary hierarchy structure (Safety, Accessibility, Amenity, Sensibility, Friendly to nature, Territory, Interaction) and 23 factors as the secondary hierarchy structure. This evaluation criteria will help healthcare facility designers and healthcare organizations to build the healthcare facilities.

• Nuclear Engineering and Technology
• /
• v.42 no.3
• /
• pp.297-304
• /
• 2010

In the design of advanced light water reactors (ALWRs) and in the safety assessment of currently operating nuclear power plants, it is necessary to evaluate the possibility of experiencing a degraded core accident and to develop innovative safety technologies in order to assure long-term debris cooling. The objective of this experimental study is to investigate the enhancement factors of dryout heat flux in debris beds by coolant injection from below. The experimental facility consists mainly of an induction heater, a double-wall quartz-tube test section containing a steel-particle bed and coolant injection and recovery condensing loop. A fairly uniform heating of the particle bed was achieved in the radial direction and the axial variation was within 20%. This paper reports the experimental data for 3.2 mm and 4.8 mm particle beds with a 300 mm bed height. The dryout heat density data were obtained for both the top-flooding and the forced coolant injection from below with an injection mass flux of up to $1.5\;kg/m^2s$. The dryout heat density increased as the rate of coolant injection increased. At a coolant injection mass flux of $1.0\;kg/m^2s$, the dryout heat density was ${\sim}6.5\;MW/m^3$ for the 4.8 mm particle bed and ${\sim}5.6\;MW/m^3$ for the 3.2 mm particle bed. The enhancement factors of the dryout heat density were 1.6-1.8.

• Nuclear Engineering and Technology
• /
• v.44 no.5
• /
• pp.483-490
• /
• 2012

PWR spent fuels produced in the Republic of Korea are expected to be recycled by pyroprocess in the long term future. Even though pyroprocess waste amounts can be smaller than that of PWR spent fuel assembly in case of direct disposal, this process essentially will produce various and unique radioactive wastes. The goals of this article are to characterize these wastes, calculate the amount of wastes, design disposal systems for each waste and evaluate the radiation safety of each system by dose assessment. The absorbed dose results of the metal and ceramic waste for the engineering barrier system (EBS) showed $2.21{\times}10^{-2}$ Gy/h and $1.15{\times}10^{-2}$ Gy/h, which are lower than the recommended value of 1 Gy/h. These results confirmed that the newly proposed disposal systems have a safety margin for the radiation produced from each waste.

• Nuclear Engineering and Technology
• /
• v.46 no.1
• /
• pp.101-108
• /
• 2014

About 40% of reactors in the world are being operated beyond design life or are approaching the end of their life cycle. During long-term operation, various degradation mechanisms occur. Fatigue caused by alternating operational stresses in terms of temperature or pressure change is an important damage mechanism in continued operation of nuclear power plants. To monitor the fatigue damage of components, Fatigue Monitoring System (FMS) has been installed. Most FMSs have used Green's Function Approach (GFA) to calculate the thermal stresses rapidly. However, if temperature-dependent material properties are used in a detailed FEM, there is a maximum peak stress discrepancy between a conventional GFA and a detailed FEM because constant material properties are used in a conventional method. Therefore, if a conventional method is used in the fatigue evaluation, thermal stresses for various operating cycles may be calculated incorrectly and it may lead to an unreliable estimation. So, in this paper, the modified GFA which can consider temperature-dependent material properties is proposed by using an artificial neural network and weight factor. To verify the proposed method, thermal stresses by the new method are compared with those by FEM. Finally, pros and cons of the new method as well as technical findings from the assessment are discussed.

• 한국환경농학회:학술대회논문집
• /
• 2009.07a
• /
• pp.93-115
• /
• 2009

There are growing public concerns over crop and food safeties due to the elevated levels of heavy metals grown in contaminated soil. Heavy metals are classified as the chemical harmful risks for crop and food safety. With implementation of GAP, crop safety is controlled by many regulatory options for soil, irrigation water and fertilizers. Any attempt to retard the metal uptake by crops may be the best protocol to secure crop and food safety. This article reviews the management strategies for heavy metals in view of crop safety in Korea and demonstrates results from the field experiments to retard metal translocation from soil to crops by using chemical amendments and soil layer management methods. Major source of soil pollution by heavy metals has been related with mining activities. Risk assessment revealed that rice consumption and groundwater ingestion in the abandoned mining areas were the major exposure pathways for metals to human and the heavy metal showed the toxic effects on human health. Chemical amendments such as lime and slag retarded Cd uptake by rice (Oryza sativa L.) by increasing soil pH, lowering the phytoavailable Cd concentration in soil solution, immobilizing Cd in soil and converting the available Cd fractions into non-available fractions. The soil layer management methods decreased the Cd uptake by 76% and Pb by 60%. Either reversing the surface layer with subsurface layer or immobilization of metals with layer mixing with lime was considered to be the practical option for the in-situ remediation of the contaminated paddy soils. Combination of chemical soil amendments and layer management methods was efficient to retard the metal bioavailability and thus to secure crop safety for heavy metals. This protocol seems to be cheap, relatively easy to practice and practical in the agricultural fields. However, a long term monitoring work should be followed to verify the efficiency of this protocol.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.5
• /
• pp.153-161
• /
• 2005

A series of installation damage tests and creep tests are performed to assess the combined effect of installation damage and creep deformation far the long-term design strength of geogrid reinforcement. Three types of geogrids are used to investigate the influence of the geogrid types. From the experimental results, it is shown that installation damage and creep deformation of geogrids significantly depends on the polymer types of the geogrids and the larger the installation damage, the more the combined effect of installation damage and creep deformation. In addition, The results of this study show that the tensile strength reduction factor, RF, considering the combined effect between installation damage and creep deformation is less than that calculated by the current design practice which calculates the long-term design strength of geogrids damaged during installation by multiplying two partial safety factors, $RF_{ID}$ and $RF_{CR}$.

• Journal of Environmental Science International
• /
• v.26 no.11
• /
• pp.1209-1222
• /
• 2017

On June 5, 2008, the "Act on Special Cases Concerning the Simplification of Authorization and Permission Procedures for Industrial Complexes" (Act No. 9106) was enacted. When it was implemented in August 2008, many industrial complex development projects were established, and the number of industrial complexes growth rates of 3-6% during 2003-2007 rose to around 15% in 2008. With the increase in industrial complexes, the environmental impacts of individual projects were examined, but comprehensive regional reviews of environmental impacts were not undertaken. In this study, we determined changes in air quality by applying the industrial complex development plan that completed the consultation at the end of 2010 to assess the comprehensive regional environmental impacts and presented the adequacy review plan for future industrial development plans based on the study's results. When considering these industrial complex development plans, emissions in North Jeolla and South Chungcheong Provinces and Daegu City have increased significantly. Air quality analyses showed that the 24 h mean $SO_2$ concentration in Daegu increased by more than 50% in summer compared to air quality concentrations in summer. The 24 h mean $PM_{10}$ and $NO_2$ concentrations increased by approximately 12 and 30%, respectively, in North Jeolla Province in summer. Areas exceeding the air quality standard for 1 h mean $O_3$ concentration increased by more than $3,500km^2$. Based on the above analysis, changes in air quality should be anticipated through a comprehensive evaluation of long-term development plans. Furthermore, control of air quality in accordance with the development of future industrial complexes is possible.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.229-232
• /
• 2003

A waste container, one of the key compartments in a multi-barrier system for a potential high level radioactive waste (HLW) repository in Korea ensures the mechanical stability against the lithostatic pressure of a deep geologic strata and the swelling pressure of the bentonite buffer. Also, it prohibits potential release of radionuclides for a certain period of time. before it is corroded by impurities. Even though the materials of a waste container is carefully chosen and all manufacturing processes are under heavy quality assurance, there might be a slight chance of intial defects in a waste container. Also, during the deposition of a waste container in a repository, there might be a chance of an incident affecting the integrity of a waste container. In this study, the FEP's and the scenarios over radiological impact of a potential initial waste container defect was developed. Then the total system performance assessment on this initial waste container failure (ICF) scenario was carried out by the MASCOT-K, one of the probabilistic safety assessment tools KAERI has developed. Results show that for the data set studied in this paper, the annual individual dose by the ICF scenario well meets the KINS regulation.

• Archives of Plastic Surgery
• /
• v.49 no.3
• /
• pp.296-303
• /
• 2022

Background In recent years thread lift has become widespread; however, existing methods need to improve their long-term outcome, which requires considering topographic anatomy of face and neck, especially the ligamentous apparatus. This study aims to assess the effectiveness and safety of an innovative method of one-time three-step thread facelift, which provides an additional support to the ligamentous structures of the upper, middle, and lower thirds of the face and neck. Methods The study included 357 patients aged 32 to 67 years with various morphotypes of aging. The original method of thread lift was applied, and its effectiveness was followed up for to 2 years. The Wrinkle Severity Rating Score (WSRS) and Global Aesthetic Improvement Scale (GAIS) scores were used for assessment by investigators, independent observers, and patients. Statistical significance was determined using paired t-test and chi-square test. Results The mean WSRS score was 3.88 ± 0.88 before the thread lift, 1.93 ± 0.81 one month after the procedure, and 2.36 ± 0.85 after 2 years of follow-up. The mean GAIS was 4.80 ± 0.04 one month after thread lift, and 4.01 ± 0.04 after 2 years, while in the patients' assessment Global Satisfaction Scale was 4.86 ± 0.02 and 4.10 ± 0.02, respectively. There were no clinically significant complications throughout the observation period. Conclusion The new method of one-time three-step thread fixation of the soft tissues of the face and neck demonstrated a high degree of satisfaction by both experts and patients after 2 years of follow-up. It showed high efficacy and safety, including in the group of patients with pronounced age-related changes of the skin of face and neck.

• Korean Journal of Agricultural Science
• /
• v.50 no.4
• /
• pp.749-758
• /
• 2023

An understanding of safety problems pursuant to environmental release of GM (Genetically Modified) crops is considered important. Among the recognized safety problems, the possibilities of weediness and ecosystem invasion are constantly being validated. We herein compared the growth characteristics and germination rate of soybeans formed by hybridization with vitamin A-enhanced soybeans carrying an introduced gene that increases β-carotene content. We also examined overwintering, survival, and weed competitiveness to evaluate hybrid ecological impact on long-term unmanaged cultivatable land. These studies revealed that the hybrid soybeans exhibited intermediate growth characteristics and germination rate compared with the vitamin A-enhanced soybeans and wild soybeans, or exhibited traits similar to those of the maternal strain. Overwintering experiments were conducted by planting seeds at depths of 0, 5, 10, and 20 cm and recovering them after three or five months. After five months, all seeds at depths more than 5 cm lost viability. Among seeds recovered after three months, only wild soybeans retained viability at depths of more than 5 cm. Survival and weed competitiveness were assessed by sowing each type of seed and performing no irrigation, or pest or weed control. Quantitative assessment of numbers of individual soybean plants that appeared in the experimental plot revealed that all plants germinated after sowing, but only wild type plants survived overwintering. These studies suggest that both GM soybeans and hybrid soybeans cannot survive in uncultivated land even if they are released into the environment, which indicates less possibility of ecosystem invasion and weediness.