• 제목/요약/키워드: Long-term fatigue damage

검색결과 36건 처리시간 0.019초

Whole-life wind-induced deflection of insulating glass units

  • Zhiyuan Wang;Junjin Liu;Jianhui Li;Suwen Chen
    • Wind and Structures
    • /
    • 제37권4호
    • /
    • pp.289-302
    • /
    • 2023
  • Insulating glass units (IGUs) have been widely used in buildings in recent years due to their superior thermal insulation performance. However, because of the panel reciprocating motion and fatigue deterioration of sealants under long-term wind loads, many IGUs have the problem of early failure of watertight properties in real usage. This study aimed to propose a statistical method for wind-induced deflection of IGU panels during the whole life service period, for further precise analysis of the accumulated fatigue damage at the sealed part of the edge bond. By the estimation of the wind occurrence regularity based on wind pressure return period, the events of each wind speed interval during the whole life were obtained for the IGUs at 50m height in Beijing, which are in good agreement with the measured data. Also, the wind-induced deflection analysis method of IGUs based on the formula of airspace coefficient was proposed and verified as an improvement of the original stiffness distribution method with the average relative error compared to the test being about 3% or less. Combining the two methods above, the deformation of the outer and inner panes under wind loads during 30 years was precisely calculated, and the deflection and stress state at selected locations were obtained finally. The results show that the compression displacement at the secondary sealant under the maximum wind pressure is close to 0.3mm (strain 2.5%), and the IGUs are in tens of thousands of times the low amplitude tensile-compression cycle and several times to dozens of times the relatively high amplitude tensile-compression cycle environment. The approach proposed in this paper provides a basis for subsequent studies on the durability of IGUs and the wind-resistant behaviors of curtain wall structures.

롤러전압콘크리트 기층의 누적피로손상을 고려한 중하중 도로의 복합포장 두께 설계 (Thickness Design of Composite Pavement for Heavy-Duty Roads Considering Cumulative Fatigue Damage in Roller-Compacted Concrete Base)

  • 김경수;김영규;차이 리후워;이승우
    • 대한토목학회논문집
    • /
    • 제42권4호
    • /
    • pp.537-548
    • /
    • 2022
  • 중하중의 교통하중은 포장체에 과도한 응력과 변형을 발생시키므로 이에 대응할 수 있는 포장 단면 설계가 중요하다. 항만 배후도로와 산업도로는 일반도로에 비해 중하중 교통의 비율이 높아 포장의 조기 파손으로 인한 문제가 다수 발생되고 있다. 국외의 경우 중차량의 통행이 많은 도로의 포장설계는 복합포장을 많이 적용하고 있다. 복합포장은 기존 포장의 설계수명을 2배 이상 증대시켜 보수비용 및 사용자 비용을 절감할 수 있는 경제적 포장 형식으로 인식되고 있다. 본 연구에서는 중하중 교통의 비율이 높은 산업도로와 항만 배후도로의 포장 장기 공용성을 확보할 수 있도록 롤러전압콘크리트 기층을 활용한 복합포장의 두께 설계 방안을 제안하고자 한다. 3차원 유한요소해석을 이용하여 포장의 재료물성 변화에 따른 역학적 거동과 장기 공용성을 검토하였으며, 계절별 컨테이너 트레일러에 의해 발생되는 롤러전압콘크리트 기층의 누적피로손상도을 고려하여 사용자가 쉽게 사용할 수 있는 카탈로그 설계를 제안하였다.

연성포장의 예방적 유지보수공법에 대한 현장 적용성 연구 (A Study on Field Application of Preventive Maintenance Method for Flexible Pavements)

  • 김낙석;진정훈
    • 대한토목학회논문집
    • /
    • 제31권4D호
    • /
    • pp.565-569
    • /
    • 2011
  • 본 연구는 예방적 유지보수공법의 한가지 방법으로서 최소단면 보수공법을 제안 하였다. 최소단면 보수공법은 아스팔트 포장도로의 종방향 파손(소성변형, 종방향 균열)에 대한 보수공법으로 차량의 주행특성을 통계적 분석으로 추론하여 최소 유효보수범위를 70cm로 산정하였으며, 포장도로의 파손 정도에 따라 유효보수범위 변화를 고려할 수 있을 것으로 판단되었다. 최소단면 보수공법의 현장 적용성을 시험하기 위하여 시험포장을 하였으며, 시험포장 결과 일정 수준의 공용성을 회복하는 것으로 나타났다. 향후, 본 최소단면 보수공법의 적절한 활용은 연성포장의 합리적 보수공법 중 한 가지가 될 수 있을 것으로 판단되며 연성 포장의 유지보수 및 관리에 대한 장기적 측면에서 볼 때 포장수명 연장과 유지보수비절감 효과가 있을 것으로 예상된다.

레이저 및 플라즈마 표면처리에 따른 이종소재 접합특성평가 (Evaluation of Bonding Performance of Hybrid Materials According to Laser and Plasma Surface Treatment)

  • 신민하;김은성;김성종
    • Composites Research
    • /
    • 제36권6호
    • /
    • pp.441-447
    • /
    • 2023
  • 최근 경량 소재에 대한 수요 증가로 기존 금속과 복합재간 접합 관심이 지대하다. 리벳팅과 같은 볼트 체결인 기계적 결합의 경우 응력 집중, 균열 및 박리가 발생함에 따라 접착제를 사용한 화학적 결합이 주목받고 있다. 본 논문에서는 접착제의 접합강도 향상을 위해 레이저 및 플라즈마 표면처리를 진행하였으며, 이에 대한 접착특성을 평가하고자 한다. 접합강도 실험을 위해 흔히 자동차용 소재로 사용되는 탄소섬유강화플라스틱(CFRP), CR340(Steel)과 Al6061(Aluminum)을 실험 소재로 선정해 레이저 및 플라즈마 표면처리를 진행 후 단축전단강도를 측정하였다. 플라즈마 표면처리 후 CFRP-CR340 및 CFRP-Al6061 이종소재 시편에서 각각 접합강도가 7.3% 및 39.2% 향상되었다. CR340-Al6061 시편은 레이저 표면처리에서 기준 시편대비 56.2% 증가하였다. 플라즈마 표면처리 후 표면자유에너지(SFE)가 향상되었는데 이는 화학반응 메커니즘을 통해 손상을 최소화해 접합강도 향상을 나타낸 것으로 사료된다. 레이저 표면처리는 물리적 표면처리로 거친 접합 표면 생성으로 인해 mechanical interlocking 효과로 인해 접착 강도가 향상된 것으로 사료된다. 본 연구를 토대로 실제 구조물 파손의 대표적인 원인인 피로파손을 예방하기 위해 장기 피로시험을 진행 할 예정이다.

Study on the Microstructural Degradation of the Boiler Tubes for Coal-Fired Power Plants

  • Yoo, Keun-Bong;He, Yinsheng;Lee, Han-Sang;Bae, Si-Yeon;Kim, Doo-Soo
    • KEPCO Journal on Electric Power and Energy
    • /
    • 제4권1호
    • /
    • pp.25-31
    • /
    • 2018
  • A boiler system transforms water to pressured supercritical steam which drives the running of the turbine to rotate in the generator to produce electricity in power plants. Materials for building the tube system face challenges from high temperature creep damage, thermal fatigue/expansion, fireside and steam corrosion, etc. A database on the creep resistance strength and steam oxidation of the materials is important to the long-term reliable operation of the boiler system. Generally, the ferritic steels, i.e., grade 1, grade 2, grade 9, and X20, are extensively used as the superheater (SH) and reheater (RH) in supercritical (SC) and ultra supercritcal (USC) power plants. Currently, advanced austenitic steel, such as TP347H (FG), Super304H and HR3C, are beginning to replace the traditional ferritic steels as they allow an increase in steam temperature to meet the demands for increased plant efficiency. The purpose of this paper is to provide the state-of-the-art knowledge on boiler tube materials, including the strengthening, metallurgy, property/microstructural degradation, oxidation, and oxidation property improvement and then describe the modern microstructural characterization methods to assess and control the properties of these alloys. The paper covers the limited experience and experiment results with the alloys and presents important information on microstructural strengthening, degradation, and oxidation mechanisms.

Gelatinized and Fermented Powders of Lepidium meyenii (Maca) Improve Physical Stamina and Epididymal Sperm Counts in Male Mice

  • Shin, Sun-Hee;Park, Dong-Sun;Jeon, Jeong-Hee;Joo, Seong-Soo;Kim, Yun-Bae;Kang, Hyun-Gu
    • 한국수정란이식학회지
    • /
    • 제23권4호
    • /
    • pp.283-289
    • /
    • 2008
  • Lepidium meyenii, known as Maca, is traditionally employed in the Andean region for its supposed properties to improve energy and fertility. In the present study, we investigated the effects of gelatinized and fermented Maca on improvement of physical stamina and epididymal sperm counts, and on blood biochemical parameters related to fatigue and tissue injury: creatine phosphokinase, aspartate transaminase, lactate dehydrogenase, blood urea nitrogen, glucose, total cholesterol and total proteins. Adult male mice was divided at random into two main groups (resting and excercise groups). The excercise group was separated into three subgroups (exercise only, exercise with gelatinized Maca and fermented Maca-treatment groups). Gelatinized or fermented Maca (800 mg/kg) were orally administered for 30 days. All animals in exercise groups were subjected to daily 30-min swimming for 28 days 30 min after Maca treatment. Daily exercise decreased the body weight gain, and fermented Maca further attenuated the body weight increase. Gelatinized and fermented Maca significantly increased the maximum swimming time on 14 and 28 days of treatment (p<0.05), respectively, suggestive of a long-term stamina-enhancing effect of fermented Maca. Both Maca fully or significantly recovered blood parameters of energy as well as muscular and hepatocytic injuries changed by repeated exercise and maximum swimming performance (p<0.01). Moreover, gelatinized and fermented Maca increased epididymal sperm counts 22.0% and 32.0%, respectively. In conclusion, the results indicate potential benefits of Maca for improving both physical stamina by minimizing muscular and hepatic damage and preserving energy during swimming exercise and male reproductive function by increasing epididymal sperm counts.