Study on the Microstructural Degradation of the Boiler Tubes for Coal-Fired Power Plants |
Yoo, Keun-Bong
(KEPCO Research Institute, Korea Electric Power Corporation)
He, Yinsheng (KEPCO Research Institute, Korea Electric Power Corporation) Lee, Han-Sang (KEPCO Research Institute, Korea Electric Power Corporation) Bae, Si-Yeon (KEPCO Research Institute, Korea Electric Power Corporation) Kim, Doo-Soo (KEPCO Research Institute, Korea Electric Power Corporation) |
1 | Abe, F., "Progress in Creep-Resistant Steels for High Efficiency Coal-Fired Power Plants", Journal of Pressure Vessel Technology, Vol. 138, 2016, pp. 040804. DOI |
2 | Abe, F., "Research and Development of Heat-Resistant Materials for Advanced USC Power Plants with Steam Temperatures of and Above". Engineering, Vol. 1, 2015. pp. 211-224. DOI |
3 | Eggler, G, "The effect of long-term creep on particle coarsening in tempered martensitic ferritic steels", Acta Metallurgica, vol, 37, 1989, pp. 3225-3234. DOI |
4 | Milović, L., et al., "Microstructures and mechanical properties of creep resistant steel for application at elevated temperatures", Materials & Design, Vol. 46, 2013, pp. 660-667. DOI |
5 | Hald, J., "Microstructure and long-term creep properties of 9- 12% Cr steels", International Journal of Pressure Vessels and Piping, Vol. 85, 2008, pp. 30-37. DOI |
6 | Klotz, U.E., C. Solenthaler, and P.J. Uggowitzer, "Martensitic- austenitic 9-12% Cr steels-Alloy design, microstructural stability and mechanical properties". Materials Science and Engineering: A, Vol 476 2008, pp. 186-194. DOI |
7 | Y.S. He, J.C. Chang, J.L. Dong and K. Shin, "Microstructural Evolution of X20CrMoV12.1 Steel Upon Long-Term On-Site Exposure in Power Plants", Advanced Science Letters, Vol. 4, 2011, pp. 1416-1423. DOI |
8 | Shingledecker, J., "The Advanced Austenitic Stainless Steels Handbook: 347HFG, SUPER304H, HR3C"., EPRI, 2013. |
9 | Y.S. He, J.L. Dong, J.S. Juang and K. Shin, "An Improved nondestructive replication metallography method for investigation of the precipitates in Cr-Mo-V turbine steel", Surface and Interface Analysis, Vol. 44, 2012, pp. 1411-1414. DOI |
10 | Hino, M, Y.S. He, K.J. Li, J.C. Chang and K. Shin, "Microstructural Evolution of X20CrMoV12.1 Steel upon Short-term Creep Rupture Test", Applied Microscopy, Vol. 43, 2013, pp. 164-172. DOI |
11 | Y.S. He, J.C. Chang, J.H. Lee and K. Shin, "Microstructural Evolution of Grade 91 Steel upon Heating at ". Korean Journal of Materials Research, Vol. 25, 2015. Pp. 607-611. DOI |
12 | H.S. Lee, J.S. Jung, D.S. Kim, K.B. Yoo, "Failure Analysis on welded joints of 347H austenitic boiler tubes", Engineering Failuer Analysis, Vol.57, 2015, pp 413-422. DOI |
13 | Fry, A., S. Osgerby, and M. Wright, "Oxidation of Alloys in Steam Environments - A Review". NPL Report. MATC (A) 90, 2002. |
14 | Tan, L., X. Ren, and T.R. Allen, "Corrosion behavior of 9-12% Cr ferritic-martensitic steels in supercritical water. Corrosion Science", Vol. 52, 2010, pp. 1520-1528. DOI |
15 | Xia, Z.X., et al., "Improve oxidation resistance at high temperature by nanocrystalline surface layer". Scientific Reports, 13027, 2015. |
16 | Hoelzer, D.T., B.A. Pint, and I.G. Wright, "A microstructural study of the oxide scale formation on ODS Fe-13Cr steel". Journal of Nuclear Materials, Vol. 283-287, 2000, pp. 1306-1310. DOI |