• 전자공학회논문지C
• /
• 제34C권2호
• /
• pp.61-70
• /
• 1997

Human-hand gestures have been used a means of communication among people for a long time, being interpreted as streams of tokens for a language. The signed language is a method of communication for hearing impaired person. Articulated gestures and postures of hands and fingers are commonly used for the signed language. This paper presents a system which recognizes the korean sign language (KSL) and translates the recognition results into a normal korean text and sound. A pair of data-gloves are used a sthe sensing device for detecting motions of hands and fingers. In this paper, we propose a dynamic gesture recognition mehtod by employing a fuzzy feature analysis method for efficient classification of hand motions, and applying a fuzzy min-max neural network to on-line pattern recognition.

• 한국정보통신학회논문지
• /
• 제18권9호
• /
• pp.2209-2215
• /
• 2014

본 논문은 DOI방법을 개선한 디인터레이싱 방법을 제안한다. DOI방법은 강력한 인트라필드 기반의 디인터레이싱 기술이지만 긴 연산시간과 주기적인 패턴에서 방향을 잘못 찾는 문제를 가지고 있다. 이 문제를 해결하기 위해 기존의 전역검색 대신하여 2단계 검색을 하여 연산속도를 향상시키고 두 가지 과정을 추가하여 영상의 화질을 개선하는 방법을 제안한다. 첫 번째 단계로 잘못된 방향으로 찾은 공간벡터를 삭제하며 두 번째 단계로 찾지 못한 방향에 대한 공간 방향벡터를 삽입함으로써 제안된 방법에서 잘못 찾은 공간 방향벡터를 정확한 결과인지 재확인하여 픽셀의 보간에 사용할지 검사한다. ISO 실험 이미지를 이용하여 제안된 방법과 line evarage, edge-based line averaging, DOI, selective deinterlacing algorithm 등의 기존의 방법을 비교한 결과 제안된 방법이 객관적으로나 주관적으로 우 수하다는 것을 보였다.

• 대한치과보철학회지
• /
• 제37권2호
• /
• pp.143-166
• /
• 1999

The success of porcelain laminate veneer depends on the bond strength between tooth structure and ceramic restoration and the design of tooth preparation. In particular, incisal coverage and incisal finish line are the two most important factors in long-term fracture resistance. Although the majority of clinicians are practicing incisal coverage and there are various opinions on the geo-metrical ratio between the clinical crown length of the remaining tooth structure and the length of incisal extension in porcelain laminate veneer and the optimal incisal finish lines. scientific evidence still loaves much to be desired. The purpose of this study was to determine the effects of the amounts of incisal coverage and the types of incisal finish line on the stress distribution in maxillary anterior porcelain laminate veneers under two different loading conditions. Three-dimensional finite element models of a maxillary anterior porcelain veneer with differ-ent amounts of incisal coverage ; 0, 1, 2, and 3mm and different incisal finish lines feathered edge, incisal bevel, reverse bevel and lingual chamfer with various amounts of lingual extension were developed. 300N force was applied at the point 0.5mm cervical of the linguoincisal edge in two loading conditions ; A) 125 degrees, B) 132 degrees. Tensile and compressive stress in ceramic and shear stress in the resin cement layer were analyzed using three-dimensional finite element method. The results were as follows : 1. The types of incisal finish line had more influence on the stress distribution in porcelain laminate veneer than the amounts of incisal coverage. 2. In case of no incisal coverage, incisal beveled laminate exhibited more evenly distributed tensile stress than feathered edged laminate. And in case of incisal coverage, reverse beveled laminate and lingual chamfered laminate with 1mm lingual extension exhibited more evenly distributed tensile stress than lingual chamfered laminates with 2mm and 3mm lingual extension. 3. As long as the lingual chamfer goes, less tensile stress was found at the incisal edge, while much more tensile stress was found at the lingual margin area in proportion to the length of lingual extension. 4. Under 125 degree load, tensile stress in porcelain laminate veneer had increased compared with that under 132 degree load and the difference exhibited by the change of the amount of tooth support was larger. 5. The types of incisal finish line and the distance from the incisal finish line to the loading point had more influence on the shear stress distribution in the resin cement layer than the amounts of incisal coverage. In contrast loading condition had little influence.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2163-2173
• /
• 2011

In this study, the deformations and stresses occurred in the elastic rail fastening system were evaluated according to applied extreme track forces based on various field conditions, track curvature and poor properties. The purpose of this study is to establish a method for efficient management and suggest guide line for track construction in order to secure the performance quality of the elastic rail fastening system on the sharp curved track.. Therefore, initial construction qualities of rail and concrete bed, initial clamping force and applied extreme track forces were used into experiment as several parameters. Using these test results, the performance characteristics of the elastic rail fastening system were also evaluated. As a result, it suggested the method to secure long-term durability of fastening system and comparing sharp curved track to results on field test.

• The Journal of the Acoustical Society of Korea
• /
• 제25권4E호
• /
• pp.154-158
• /
• 2006

In this paper, we suggest a noise estimation method for speech enhancement in nonstationary noisy environments. The proposed method consists of the following two main processes. First, in order to receive fewer affect of variable signals, a best fitting regression line is used, which is obtained by applying a least squares method to coefficient magnitudes in a node with a uniform wavelet packet transform. Next, in order to update the noise estimation efficiently, a differential forgetting factor and a correlation coefficient per subband are used, where subband is employed for applying the weighted value according to the change of signals. In particular, this method has the ability to update the noise estimation by using the estimated noise at the previous frame only, without utilizing the statistical information of long past frames and explicit nonspeech frames by voice activity detector. In objective assessments, it was observed that the performance of the proposed method was better than that of the compared (minima controlled recursive averaging, weighted average) methods. Furthermore, the method showed a reliable result even at low SNR.

• 정보저장시스템학회논문집
• /
• 제2권1호
• /
• pp.85-90
• /
• 2006

In this study, measurement of thermal conductivity of multilayer thin dielectric film has been conducted via differential $3\omega$ method. Also, verification of differential $3\omega$ method has been accomplished with various proposed criteria. The target film for the measurement is 300 nm thick silicon dioxide which is covered with upper protective layer of various thicknesses. The upper protective layer is inserted between the target film and the heater line for purpose of electrical insulator or anti-oxidation barrier since the target film may be a good electrical conductor or a well-oxidizing material. Since the verification of differential $3\omega$ method has not been conducted yet, we have shown that the measurement of thermal conductivity of thin films with upper protective layer via differential $3\omega$ method is verified to be reliable as long as the proposed preconditions of the samples are satisfied. Experimental results show that the experimental errors tend to increase with aspect ratio between thickness of the upper protective layer and width of the heater line due to heat spreading effect.

• 한국음향학회지
• /
• 제21권3호
• /
• pp.304-309
• /
• 2002

LSP (Line Spectrum Pairs) 파라미터는 음성코덱 (codec)이나 인식기에서 음성신호를 분석하여 전송형이나 저장형 파라미터로 변환되어, 주로 저전송률 음성부호화기에 사용된다. 그러나 LPC (Linear Predictive Coding) 계수를 LSP로 변환하는 방법이 복잡하여 계산시간이 많이 소요된다는 단점이 있다. 기존의 LSP변환 방법 중 음성 부호화기에서 주로 사용하는 실근 (real root)방법은 근을 구하기 위해 주파수 영역을 순차적으로 검색하기 때문에 계산시간이 많이 소요되는 단점을 갖는다. 본 논문에서 기존의 실근 방법과 비교 평가한 알고리즘은 첫 번째 검색 대역에 멜 스케일 (met scale)을 사용하였고, 두 번째는 LSP 파라미터의 분포 특성을 조사하여 이를 토대로 검색구간의 순서와 검색간격을 달리 하였다. 실험결과, 기존의 실근 방식에 비하여 두 가지 방식 모두가 변환시간의 47% 이상이 감소되는데 반하여 동일한 근을 찾음을 알 수가 있었다.

• 한국직업건강간호학회지
• /
• 제15권2호
• /
• pp.94-103
• /
• 2006

Purpose: This study was to understand foreign workers' experiences exposed hazard chemical materials in korean industry. Method: The research subjects were 92 foreign workers worked in seoul, namyangju, ansan, suwon, pocheon, incheon, jincheon, and daejeon. It was that grounded theory method as qualitative approach was applied with in-depth interview, recording and dictation, and collected data was analysed line-by-line by research teams. The analysis process of in depth interview data was three phase. Results: The first phase was that find out meaningful data and confronted data for meaningful data was 53 meaningful items. The second phase was coding process of meaningful data, total coding items were 9, difficulty of new environment, existence of health hazard factors originated in work, performance of basic health management, management of hazard materials in work-site, self care of hazard materials in work-site, discrimination of disaster-compensation originated in work, perception of work stress, motivation of leaving position, satisfaction for present life. The third phase was 5 adaptation process, copying phase for new environment, management phase for health hazard factors, health change phase, life change phase, illegal stay phase. Conclusion: In summary, as a results it was concluded that foreign workers was experienced new environment and then has various problems in working site. But these evidences were not different from korean workers basically, undoubtedly reality of a korean small and medium enterprise. And foreign workers with long time stay have had many health problems probably, but they have want to long stay and so reach an unexpected result, illegal long stay. Therefore, we should make efforts for adequate foreign workers' health management at work-site and overall life in governmental and industrial nursing level.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.117-124
• /
• 2000

This paper presents the construction planning and the detail design of a 16.2 km long railroad tunnel in a mountainous area. Major design conditions for railroad are the single track, loop-typed alinement, and a maximum grade of 24.5$\textperthousand$. A underground station(double track) with a length of 1.1km is located in the middle of the line for train cross-passing. Tunnel is excavated in highly complex geological conditions including faulted areas, abandoned mine works areas, and various rock types such as sandstone, shale, limestone, and coal seam partly. Drilling and blasting method was adopted because it is more flexible than TBM(Tunnel Boring Machine) as a result of risk assessment for geological conditions in this area. Two working adits were planned to adjust the construction schedule and can be used for ventilation and maintenance in operation phase. New material and concept were introduced to the tunnel drain design. They are expected to improve tunnel drain condition and capability. Rational tunnel support design was tried to consider the various tunnel size and purpose and to use the geological investigation results.

• Journal of Electrical Engineering and Technology
• /
• 제4권1호
• /
• pp.123-130
• /
• 2009

The partial discharge (PD) measurement is a very effective method to assess the winding insulation condition of high-voltage machines, since most of the insulation failure processes are directly or indirectly caused by PD. On-line PD measurements, which can detect insulation defects of winding in the early stages on rotating machines in operation, have been accepted as the most important technique. The epoxy mica capacitive coupler is currently and extensively used for on-line detection of PD pulses of high-voltage rotating machines. To evaluate the feasibility of developing a capacitive coupler that is easier to manufacture at a lower cost compared to epoxy mica couplers, a 100pF capacitive coupler made of ceramic material is designed, fabricated and tested for on-line PD measurements of 23 kV electrical machines. A series of electrical tests and accelerated aging tests are performed on the ceramic coupler to evaluate the performance requirements, long-term reliability and thermal stability for in field application. The test results show that the newly developed ceramic coupler provides equal and improved performance at a lower cost compared to epoxy mica couplers, and estimated voltage life is anticipated to surpass 100 years.