• 대한토목학회논문집
• /
• 제36권6호
• /
• pp.969-977
• /
• 2016

강합성 소수 거더교에 적용되는 장지간 프리스트레스트 콘크리트(PSC) 바닥판에 대해 정적재하실험을 수행하였다. 장지간 바닥판의 구조거동의 평가를 위해서는 바닥판 지간(교축직각방향 길이)이 긴 만큼 충분한 교축방향의 길이를 갖는 실험체 모델을 대상으로 해야 하는데, 이러한 실험체 크기는 운반, 실험공간 등의 제약으로 인해 실제 장지간 바닥판의 크기로 구조거동을 평가하는데 어려움이 있다. 따라서, 본 연구에서는 바닥판 실험체의 교축방향 길이를 감소시키고, 실제 장지간 바닥판 크기에 대한 교축방향의 바닥판 강성을 실험체 모델에 모사하기 위해 보강재(H-beam)를 적용하는 방법을 제안하였으며, 이를 통해 장지간 바닥판의 파괴거동과 구조성능을 평가하였다.

• 한국도로학회논문집
• /
• 제11권3호
• /
• pp.151-161
• /
• 2009

본 연구는 장스팬 콘크리트 포장 슬래브가 환경하중을 받아 컬링 거동을 할 때의 특성을 분석하기 위하여 수행되었다. 먼저 장스팬 포장 슬래브의 유한요소해석 모델을 구성하여 컬링 시 응력분포 특성 및 슬래브 길이, 두께, 하부지지층 강성, 슬래브 단부 구속 등이 컬링 거동에 미치는 영향을 분석하였다. 또한 실제 시공된 장스팬 포장 슬래브를 이용하여 현장에서 환경하중에 의한 거동을 측정함으로써 컬링 거동 특성을 실험적으로도 분석하였다. 연구 결과, 장스팬 포장 슬래브는 단부에서 부터 슬래브 중앙을 따라 어느 정도 안쪽으로 들어오면 컬링에 의한 수직변위가 발생하지 않으며 응력은 이곳에서부터 일정하게 최대치를 보이게 된다. 장스팬 포장 슬래브의 길이 및 하부지지층의 강성은 최대 컬링 응력에 영향을 미치지 않았으며, 슬래브 단부의 구속은 컬링 응력이 단부까지 발생하게 하지만 최대 컬링 응력의 크기에는 거의 영향을 미치지 않았다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권4호
• /
• pp.52-59
• /
• 2012

횡방향으로 프리스트레스가 도입된 장지간 PSC 바닥판의 정적 거동을 예측하기 위한 유한요소해석 모델을 구성하고, 해석결과를 선행연구에 의한 실험결과와 비교하였다. 유한요소해석에 의하여 서로 다른 콘크리트 강도와 프리스트레스 크기를 변수로 갖는 각각의 실험체에 대한 하중-처짐 관계 곡선을 비교적 근접하게 추정할 수 있었다. 또한, 변형률 분포와 변수에 따른 극한강도 변화로부터 펀칭전단에 의한 파괴형태와 손상범위 등을 간접적으로 예측할 수 있었다. 이 연구에서 활용된 유한요소해석 모델은 펀칭전단파괴에 의한 펀칭콘의 분리를 사실적으로 재현하기 위한 목적이 아니며, 실험연구를 위한 보조적 수단으로서 정적거동예측과 실험결과의 보완 등에 효과적으로 활용될 수 있을 것으로 판단된다.

• Wind and Structures
• /
• 제20권2호
• /
• pp.249-274
• /
• 2015

Long-span cable-stayed bridges exhibit some features which are more critical than typical long span bridges such as geometric and aerodynamic nonlinearities, higher probability of the presence of multiple vehicles on the bridge, and more significant influence of wind loads acting on the ultra high pylon and super long cables. A three-dimensional nonlinear fully-coupled analytical model is developed in this study to improve the dynamic performance prediction of long cable-stayed bridges under combined traffic and wind loads. The modified spectral representation method is introduced to simulate the fluctuating wind field of all the components of the whole bridge simultaneously with high accuracy and efficiency. Then, the aerostatic and aerodynamic wind forces acting on the whole bridge including the bridge deck, pylon, cables and even piers are all derived. The cellular automation method is applied to simulate the stochastic traffic flow which can reflect the real traffic properties on the long span bridge such as lane changing, acceleration, or deceleration. The dynamic interaction between vehicles and the bridge depends on both the geometrical and mechanical relationships between the wheels of vehicles and the contact points on the bridge deck. Nonlinear properties such as geometric nonlinearity and aerodynamic nonlinearity are fully considered. The equations of motion of the coupled wind-traffic-bridge system are derived and solved with a nonlinear separate iteration method which can considerably improve the calculation efficiency. A long cable-stayed bridge, Sutong Bridge across the Yangze River in China, is selected as a numerical example to demonstrate the dynamic interaction of the coupled system. The influences of the whole bridge wind field as well as the geometric and aerodynamic nonlinearities on the responses of the wind-traffic-bridge system are discussed.

• Structural Engineering and Mechanics
• /
• 제61권5호
• /
• pp.645-655
• /
• 2017

To determine the seismic applicability of a long-span railway concrete upper-deck arch bridge with concrete-filled steel-tube (CFST) rigid skeleton ribs, some fundamental principles and seismic approaches for long-span bridges are investigated to update the design methods in the current Code for Seismic Design of Railway Engineering of China. Ductile and mixed isolation design are investigated respectively to compare the structural seismic performances. The flexural moment and plastic rotation demands and capacities are quantified to assess the seismic status of the ductile components. A kind of triple friction pendulum (TFP) system and lead-plug rubber bearing are applied simultaneously to regularize the structural seismic demands. The numerical analysis shows that the current ductile layout with continuous rigid frame approaching spans should be strengthened to satisfy the demands of rare earthquakes. However, the mixed isolation design embodies excellent seismic performances for the continuous girder approaching span of this railway arch bridge.

• Wind and Structures
• /
• 제27권3호
• /
• pp.175-186
• /
• 2018

With the continuous increase of span lengths, modern bridges are becoming much more flexible and more prone to flutter under wind excitations. A reasonable probabilistic flutter analysis of long-span bridges involving random and uncertain variables may have to be taken into consideration. This paper presents a method for estimating the reliability index and failure probability due to flutter, which considers the very important variables including the extreme wind velocity at bridge site, damping ratio, mathematical modeling, and flutter derivatives. The Aizhai Bridge in China is selected as an example to demonstrate the numerical procedure for the flutter reliability analysis. In the presented method, the joint probability density function of wind speed and wind direction at the deck level of the bridge is first established. Then, based on the fundamental theories of structural reliability, the reliability index and failure probability due to flutter of the Aizhai Bridge is investigated by applying the Monte Carlo method and the first order reliability method (FORM). The probabilistic flutter analysis can provide a guideline in the design of long-span bridges and the results show that the structural damping and flutter derivatives have significant effects on the flutter reliability, more accurate and reliable data of which is needed.

• 한국안전학회지
• /
• 제29권3호
• /
• pp.72-78
• /
• 2014

The minimum thickness of long-span deck slab is proposed by checking the limit state according to the Korean highway bridge design code(limit state design). Both minimizing thickness and ensuring safety of deck slab are important design factors to increase a competitive price of the long span deck slabs. The required thicknesses for satisfying flexural capacity, preventing punching shear failure and limiting deflection were calculated by considering KL-510 load model which has increased total load compared to DB 24 from 432 kN to 510 kN. The results of the required thickness for various limit states were compared to propose the minimum thickness as a function of span length of deck slabs. The proposed minimum thickness is influenced by satisfying flexural capacity and limiting deflection. It turns out to be similar compared to the results of the previous study by ultimate strength design method even if the live load model was increased in total weights.

• 한국해양공학회지
• /
• 제19권2호
• /
• pp.47-52
• /
• 2005

This paper introduces a procedure for free span and fatigue analysis of offshore pipelines per DNV-RP-F105, 2002. The new method includes the axial force and deflection load in pipelines. The screening criteria were established to calculate the allowable span lengths in the new design codes. The screening criteria allows a certain amount of vortex-induced vibration due to wave and current loading. However, the induced pipe stresses are very small and usually below the limit stresess of typical S-N curves. In contrast, the conventional criteria did not allow any vortex-induced vibration in the free span of pipelines. Thus, the screening criteria yields reduced allowable span lengths. A simplified procedure was established to calculate the fatigue damage due to long-term current distribution. The long-term current statistics was assumed with a 3-parameter Weibull distribution. The fatigue damage was estimated for the span lengths obtained from the screening criteria for various conditions. Sample calculations show the effect of axial force for various boundary conditions. Comparisons with conventional criteria are included.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.125-130
• /
• 2001

A existing design method of PSC girder bridges, according to total service loads, stress required tendon force at a time. Because this design method increases beam depth, design of long span is difficult. However, As UC girder stressing at difficult loading stages reduces sectional depth of PSC girder, both design and operation of long span bridges is possible. so, this study analyzes the effect of design parameter (Girder Strength, Girder Spacing, Span Length, Joint Strength) on the beam depth of IPC girder continuous bridges, and shows sectional depth of UC girder for design of long span bridges. According to analysis, when a continuous bridges of same length span is at strength of joint over strength of girder of 600kg/$cm^{2}$, a change of beam depth is observed and when a continuous bridges of different span length is at strength of joint below strength of girder of 600kg/$cm^{2}$, a change of beam depth is observed. In two case, a change of beam depth is mostly observed over strength of girder of 350kg/$cm^{2}$ according to analysis of deflection data, a continuous bridges of IPC girder is nearly satisfied.

• 대한토목학회논문집
• /
• 제36권4호
• /
• pp.595-604
• /
• 2016

본 연구에서는 현행 도로교설계기준의 KL-510 하중을 적용하여 장지간 바닥판의 내측 지간에 따른 캔틸레버 바닥판의 설계휨모멘트를 제안하였다. 장지간 바닥판의 내측 지간은 6.0~12.0m 범위를 대상으로 하였고, 캔틸레버 바닥판의 길이는 내측 지간의 30~50%를 적용하였다. 설계휨모멘트의 결정을 위해 바닥판의 직교이방성, 거더의 강성, 그리고 다차로재하계수의 영향을 반영하였으며, 이를 기존의 DB-24 하중에 대한 설계휨모멘트와 비교하였다.