• Computers and Concrete
• /
• 제6권3호
• /
• pp.235-252
• /
• 2009

Due to the reduction of bond strength resulting from the high corrosion level of reinforcing bars, influence of this reduction on flexural capacity of reinforced concrete (RC) beam should be considered. An extreme case is considered, where bond strength is complete lost and/or the tensile steel are exposed due to heavy corrosion over a fraction of the beam length. A compatibility condition of deformations of the RC beam with partially unbonded length is proposed. Flexural capacity of this kind of RC beam is predicted by combining the proposed compatibility condition of deformations with equilibrium condition of forces. Comparison between the model's predictions with the experimental results published in the literature shows the practicability of the proposed model. Finally, influence of some parameters on the flexural capacity of RC beam with partially unbonded length is discussed. It is concluded that the flexural capacity of the beam may not be influenced by the completely loss of bond of the whole beam span as long as the tensile steel can yield; whether or not the reduction of the flexural capacity of the beam resulting from the loss of bond over certain length may occur depends on the detailed parameters of the given beam.

• 한국공간구조학회논문집
• /
• 제22권3호
• /
• pp.65-72
• /
• 2022

A typical low and medium-sized neighborhood living facility in reinforced concrete building secures a high floor and pursues an efficient module plan(long span). Accordingly, research on the development of new hybrid beams that can innovatively reduce labor costs such as on-site installation and assembly while securing strength and rigidity is ongoing. In order to verify the structural performance of the U-flanged truss composite beam with newly developed shape, Experiments with various variables are required. Based on the results, this study is to evaluate the strength of U-flanged truss hybrid beam through the flexural strength of the Korea Design Code and experimental values. It was evaluated that nominal flexural strength was 110% to 135% higher than the experimental value.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권6호
• /
• pp.44-51
• /
• 2017

최근 국내 자동차 보유대수의 급격한 증가로 도심지 주차문제가 복잡해지고 있다. 도심지 주차문제 해결에 있어 공작물 주차장이 주목을 받고 있다. 그러나 공작물 주차장은 전체 높이 8 m 이하로 건설되도록 규정되어 있다. 이에 본 연구에서는 층고절감 및 장스팬화가 가능한 와이드 합성보를 개발하여 휨성능을 평가하였다. 휨 성능 실험 결과, 강재보의 두께가 3 mm 증가($6mm{\rightarrow}9mm$)함에 따라 휨강도는 약 20%가 증가하였다. 보 보강철근(트러스철근)의 형태(삼각형, 사각형)은 휨강도에 영향을 미치지 않았다. 보 보강철근(트러스철근)이 없는 경우는 있는 경우보다 약 10%가량 휨강도가 저하되었다. 또한 하중이 증가할수록 중립축은 상부로 이동하지만 일정하중을 넘어가면 중립축이 다시 하부로 이동하는 결과를 나타내었다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.83-87
• /
• 2002

Aerospace industries are widely using honeycomb sandwich structures that it has high specific strength and stiffness, chemical material resistance and fatigue resistance. But, in repairing process of damaged areas, one of the problems is that delamination can be occurred in the sound areas during and/or after the exposure to the elevated curing temperature in case that the repair process is repeated. Therefore, this study was conducted Flatwise tensile, Drum peel and Long beam flexural strength tests to evaluate the degree of degradation of mechanical properties of the honeycomb sandwich structures by affecting thermal aging. As the results, the decrease of mechanical strength was observed at the specific specimen which is exposed over 50hrs at $127^{\circ}C$.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.177-180
• /
• 2003

I-beam composite hollow slabs were proposed for long-span slabs and long-span bridges due to their higher stiffness and strength. However, the behavior of the composite slab is quite complicate and allowable stress design method is used for the design of the slab. In this paper, static tests on the composite hollow slabs were performed and their inelastic behavior was investigated. Ultimate strength of the composite slabs were evaluated and the contribution of each I-beam to the flexural strength of the slab was also estimated using the measured strain distribution. From the results of these experiments, I-beam composite hollow slabs can be designed by strength design method.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.611-616
• /
• 2002

The concrete beam is quickly required to be replaced or strengthened due to decreasing load carrying capacity. Flexural tests on 3.1m long reinforced concrete beams with carbon-fiber rod are reported. The selected experimental variable is the method of the anchoring beam. The effects of this variable in overall behavior are discussed. This paper considered relation of load-displacement and load-strain. The maximum load was increased to the static behavior of the R/C beam strengthened with CFR rod. The results indicated generally that the flexural strength of strengthening beam was increased. It was required a proper anchorage system and can be led the ductility of beams of a carbon-fiber rod.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권3호
• /
• pp.143-149
• /
• 2019

U-형 복합보는 공작물 주차장으로 사용하기 위한 목적으로 개발되었다. 복합보를 공작물로 적용할 때, 가장 우선적으로 고려하여야 할 사항은 낮은 층고와 장경간이다. 또한, 철근 콘크리트 및 강구조가 혼합된 구조이기 때문에 일체성을 확보하고, 소요강도 이상의 구조성능을 확보하여야 한다. 본 연구는 철근 콘크리트 슬래브와 U-형 강판으로 이루어진 복합보의 구조성능을 파악하기 위한 것이다. 복합보의 구조성능을 파악하기 위해 주차장용으로 사용되는 일반적인 U-형 복합보를 기준실험체로 설정하고, 기준실험체 대비 하중방향, U-형 복합보의 춤 및 폭을 변화시킨 실험체를 제작하여 실험을 실시하였다. 실험체 지점간 거리는 4.5m 이며, 하중은 순수 휨구간이 1.5m가 되도록 중앙부 2점가력 하였다. 이론값 산정을 위해 U-형 중앙부의 철근, 강재, 콘크리트 등에 변형게이지를 부착하였으며, 하중점 및 측면에 변위계를 설치하였다. 실험결과, 주차장용으로 계획된 기준실험체의 초기 항복강도는 U-형 강재 밑면에서 처음 발생되었다. 항복강도 이후에는 U-형 강재의 항복구간이 점점 확대되면서 최대강도에 도달되었으며, 최대강도 이후에는 RC 슬래브 콘크리트가 압괴되면서 최종파괴 되었다. 춤을 증가시킨 실험체의 구조성능은 기준실험체와 비교하여 강도 및 연성이 매우 향상된 것을 알 수 있다. 또한, 하중방향에 따른 저항 성능은 부가력으로 가력했을 때 휨성능은 저하되나 연성거동은 증가하므로 휨성능 및 연성을 고려한 설계가 이루어져야 할 것으로 판단된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권2호
• /
• pp.111-118
• /
• 2020

이 논문에서는 섬유의 혼입량에 따른 휨부재의 장기거동에 대한 영향을 평가하기 위하여 후크형 강섬유로 보강된 고강도 콘크리트의 휨 크리프 거동에 대한 평가가 이루어졌다. 실험은 150 × 150 × 600mm 크기를 갖는 섬유 혼입량(0, 0.75 및 1.5%)을 변수로 하는 6개의 휨 시험체를 대상으로 하였다. 노치를 갖는 휨 시험체에 휨 크리프 하중을 도입하기 위하여 4점 가력 휨 시험장치가 활용되었다. 휨강도의 40%인 크리프 재하하중은 레버 장치를 활용하여 도입되었고 90일 동안 도입된 하중은 로드셀에 의해 제어되었다. 크리프 하중의 도입시, 시험체 중앙부에 설치된 노치의 균열개구변위(CMOD)가 측정되었다. 크리프 시험후 각 시험체 대한 휨시험을 실시하여 각 시험체의 잔여강도를 평가하였다. 이상과 같은 실험결과로부터 섬유 혼입량은 고강도 콘크리트의 휨 크리프 거동에 주요한 영향을 끼치고 휨강도의 40% 범위내의 지속하중은 섬유보강된 고강도 콘크리트의 잔여강도에 부정적인 영향을 끼치지 않았다.

• 한국산업융합학회 논문집
• /
• 제25권6_3호
• /
• pp.1165-1171
• /
• 2022

In this paper, the results of an experimental study were presented by measuring and comparing the flexural strength and deformation on the carbon fiber sheet strength reinforced concrete beam considering end anchorage effect. For this purpose, total six specimens of 100×100×600mm size were prepared and tested according to the KDS 14 20 20. The specimens were categorized in three cases as reference beams without strengthening, beams carbon fiber strengthened but not anchored and beams carbon fiber strengthened also anchored. Experimental results showed that the end anchorage contributed to increase the flexural strength about 42% greater than that of carbon fiber sheets alone, and the number and width of cracks were relatively increased. The results support a considerable effects of end anchorage for carbon fiber strengthened reinforced concrete beams in enhancing the flexural performance. Further studies are needed in durability and long term behavior of carbon fiber sheet strengthened reinforced concrete beams.

• 한국도로학회논문집
• /
• 제15권1호
• /
• pp.1-9
• /
• 2013

PURPOSES: The purpose of this study is to evaluate physical properties, durability, fatigue resistance, and long-term performance of poly-urethane concrete (PU) which can be possible application of thin layer on long-span orthotropic steel bridge and to check structural stability of bridge structure. METHODS : Various tests of physical properties, such as flexural strength, tensile strength, bond strength and coefficient of thermal expansion tests were conducted for physical property evaluation using two types of poly urethane concrete which have different curing time. Freezing and thawing test, accelerated weathering test and chloride ion penetration test were performed to evaluate the effect of exposed to marine environment. Beam fatigue test and small scale accelerated pavement test were performed to assess the resistance of PU against fatigue damage and long-term performance. Structural analysis were conducted to figure out structural stability of bridge structure and thin bridge deck pavement system. RESULTS: The property tests results showed that similar results were observed overall however the flexural strength of PUa was higher than those of PUb. It was also found that PU materials showed durability at marine environment. Beam fatigue test results showed that the resistances of the PUa against fatigue damage were two times higher than those of the PUb. It was found form small scale accelerated pavement test to evaluate long-term performance that there is no distress observed after 800,000 load applications. Structural analysis to figure out structural stability of bridge structure and thin bridge deck pavement system indicated that bridge structures were needed to increase thickness of steel deck plate or to improve longitudinal rib shape. CONCLUSIONS: It has been known that the use of PU can be positively considered to thin layer on long-span orthotropic steel bridge in terms of properties considered marine environment, resistance of fatigue damage and long-term performance.