• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.16 no.1
• /
• pp.59-63
• /
• 2016

Secondary damage to the user is a problem in biometrics. A brain-wave has no shape and a malicious user may not cause secondary damage to a user. However, if user sends brain-wave signals to an authentication system using a network, a malicious user could easily capture the brain-wave signals. Then, the malicious user could access the authentication system using the captured brain-wave signals. In addition, the dataset containing the brain-wave signals is large and the transfer time is long. However, user authentication requires a real-time processing, and an encryption scheme on brain-wave signals is necessary. In this paper, we propose an efficient encryption scheme using a chaos map and adaptive junk data on the brain-wave signals for user authentication. As a result, the encrypted brain-wave signals are produced and the processing time for authentication is reasonable in real-time.

• Ocean Systems Engineering
• /
• v.7 no.4
• /
• pp.345-369
• /
• 2017

The ocean environment offshore West Africa is considered to be mild. However, the generated swell from distant North and South Atlantic during austral winter and summer can reach high wave amplitudes with relatively low wave periods or low wave amplitudes with long wave periods, the later can be a crucial scenario to consider when the assessment of vessel resonance is of importance. Most offshore operations, which include offshore drilling, and installation in West Africa, are carried out from floating systems. The response of these systems and performance are governed by characteristics, such as amplitude and frequency of the wave and swell seas. It is therefore important to fully understand the sea conditions offshore Nigeria. This study covers the description of the swell sea offshore Nigeria using Bonga offshore wave measurements collected from the directional wave-rider (DWR), positioned at the Bonga site off the coast of Nigeria.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.2_2
• /
• pp.245-254
• /
• 2020

This study investigated the so far little-researched characteristics of the behaviors of rock slopes at the time of an earthquake. For the selection of the rock block, a proper model was formed by applying the similarity in consideration of the roughness and strength of the rock slope(10m) on the site, and shaking table tests were carried out according to seismic excitement acceleration, and seismic waves. In the case of the inclination angle of the joint plane of 20°, the long period wave at 0.3g or more at the time of the seismic excitement surpassed the length of 100mm, the permissible displacement (0.01H, H:slope height), which brought about the collapse of the rock; the short period wave surpassed the permissible displacement at 0.1g, which caused the collapse of the slope. The rock slope was close to a rigid block and a structure more vulnerable to the long period wave than to the short period wave. It collapsed in the short period wave even at the seismic amplitude smaller than the maximum design acceleration in Korea.

• Journal of Communications and Networks
• /
• v.16 no.5
• /
• pp.512-522
• /
• 2014

This paper proposes fast millimeter-wave (mm-wave) beam training protocols with receive beamforming. Both IEEE standards and the academic literature have generally considered beam training protocols involving exhaustive search over all possible beam directions for both the beamforming initiator and responder. However, this operation requires a long time (and thus overhead) when the beamwidth is quite narrow such as for mm-wave beams ($1^{\circ}$ in the worst case). To alleviate this problem, we propose two types of adaptive beam training protocols for fixed and adaptive modulation, respectively, which take into account the unique propagation characteristics of millimeter waves. For fixed modulation, the proposed protocol allows for interactive beam training, stopping the search when a local maximum of the power angular spectrum is found that is sufficient to support the chosen modulation/coding scheme. We furthermore suggest approaches to prioritize certain directions determined from the propagation geometry, long-term statistics, etc. For adaptive modulation, the proposed protocol uses iterative multi-level beam training concepts for fast link configuration that provide an exhaustive search with significantly lower complexity. Our simulation results verify that the proposed protocol performs better than traditional exhaustive search in terms of the link configuration speed for mobile wireless service applications.

• Journal of Navigation and Port Research
• /
• v.27 no.1
• /
• pp.55-61
• /
• 2003

The maneuvering equations of motion are derived to express the motion of a ship. The wave forces in the time domain analysis are generated from the frequency transfer function calculated by 3-D source distribution method. The linear wave forces whose periods are equal to those of incident waves and the nonlinear wave forces that make long period drift forces are computed for the simulation. The consideration of irregular waves and nonlinear wave force effects on the slew motion are carried on the analyzing the motion of ship in the regular and irregular waves.

• Journal of Navigation and Port Research
• /
• v.41 no.5
• /
• pp.345-352
• /
• 2017

Recently, a new port reserves deep water depth for safe navigation and mooring, following the trend of larger ship building. Larger port facilities include long and huge breakwaters, and mainly adopt vertical type considering low construction cost. A vertical breakwater creates stem waves combining inclined incident waves and reflected waves, and this causes maneuvering difficulty to the passing vessels, and erosion of shoreline with additional damages to berthing facilities. Thus, in this study, the researchers have investigated the response of stem waves at the vertical breakwater near the entrance channel and applied numerical models, which are commonly used for the analysis of wave response at the harbor design. The basic equation composing models here adopted both the linear parabolic approximation adding the nonlinear dispersion relationship and nonlinear parabolic approximation adding a linear dispersion relationship. To analyze the applicability of both models, the research compared the numerical results with the existing hydraulic model results. The gap of serial breakwaters and aligned angles caused more complicated stem wave generation and secondary stem wave was found through the breakwater gap. Those analyzed results should be applied to ship handling simulation studies at the approaching channels, along with the mooring test.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.225-228
• /
• 2008

There are many studies about submerged structures or porous wave absorbers to decrease damage of coast and structures. Submerged structures and porous wave absorber are decreasing energy of incoming wave by reflecting or dissipation with changing depth or with porous rubble mound. This study addresses the reflection and transmission of long wave from a trapezoidal breakwater and a vertical porous wave absorber at the same time. A systematic shape transfer is derived to determine wave reflection and transmission. And periodic solutions are matched at the slope and the front face of the absorber by assuming continuity of pressure and mass. The transmission coefficient is determined as a function of parameters describing the incoming waves, transmitting waves through the trapezoidal breakwater and the absorber characteristics.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.526-544
• /
• 2021

Based on the potential flow theory, a fully nonlinear numerical procedure is developed with boundary element method to analyze the interaction between a fixed semi-submersible platform and incident waves in open water. The incident wave is separated from the scattered wave under fully nonlinear boundary conditions. The mixed Euler-Lagrangian method is used to capture the position of the disturbed wave surface in local coordinate systems. The wave forces exerted on an inverted conical frustum are used to ensure the accuracy of the present method and good agreements with published results are obtained. The hydrodynamic characteristics of the semi-submersible platform interacting with regular waves are analyzed. Pressure distribution with time and space, tension and compression of the platform under wave action are investigated. 3D behaviors of wave run-ups are predicted. Strong nonlinear phenomena such as wave upwelling and wave interference are observed and analyzed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.6
• /
• pp.637-644
• /
• 2015

In order to estimate harbor tranquility, it is needed to simulate wave propagation in a harbor by using both methods under abnormal wave condition and normal wave condition. The problem is the latter case was not simulated in the statement for the Sea Area Utilization Conference. As harbor calmness about normal wave condition has the same meaning as harbor serviceability, in order to assess harbor tranquility, it is needed to survey wave data for long periods but the survey was not done by reason of a lack of budget and shortage of time for plan. It is more important to make a plan for minimizing environmental impact and to assess an improvement of fisherman's living environmental as the assessment of the harbor serviceability is related with the propriety of the plan. In order to assess it, it is needed to understand it clearly, survey for long period of wave data, and clarify the procedure for computation of it. And also providing wave data like tide and tidal current data from KHOA (Korea Hydro graphic and Oceanographic Agency) and making a guideline for assessing it are needed.

• International Journal of Highway Engineering
• /
• v.20 no.1
• /
• pp.9-18
• /
• 2018

PURPOSES : In this research, the initiation and development of corrugation on a gravel road with certain wheel and boundary conditions were evaluated using a coupled discrete-element method (DEM) with multibody dynamics (MBD). METHODS : In this study, 665,534 particles with a 4-mm diameter were generated and compacted to build a circular roadbed track, with a depth and width of 42 mm and 50 mm, respectively. A single wheel with a 100-mm diameter, 40-mm width, and 0.157-kg mass was considered for the track. The single wheel was set to run slowly on the track with a speed of 2.5 rad/s so that the corrugation was gradually initiated and developed without losing contact between the wheel and the roadbed. Then, the shape of the track surface was monitored, and the movement of the particles in the roadbed was tracked at certain wheel-pass numbers to evaluate the overall corrugation initiation and development mechanism. RESULTS : Two types of corrugation, long wave-length and short wave-length, were observed in the circular track. It seems that the long wave-length corrugation was developed by the longitudinal movement of surface particles in the entire track, while the short wave-length corrugation was developed by shear deformation in a local section. Properties such as particle coefficients, track bulk density, and wheel mass, have significant effects on the initiation and development of long-wave corrugation. CONCLUSIONS : It was concluded that the coupled numerical method applied in this research could be effectively used to simulate the corrugation of a gravel road and to understand the mechanism that initiates and develops corrugation. To derive a comprehensive conclusion for the corrugation development under various conditions, the driver's acceleration and deceleration with various particle gradations and wheel-configuration models should be considered in the simulation.