• 한국항공우주학회지
• /
• 제50권7호
• /
• pp.471-478
• /
• 2022

본 논문은 한국항공대학교에서 연구 및 개발한 태양광 무인기 KAU-SPUAV에 관한 내용으로, 2020년 6월 32시간 19분 장기체공 비행에 성공한 주익 4.2m 태양광 무인기의 설계 과정에 관하여 기술하였다. 태양광 무인기의 장기체공 능력을 향상시키기 위해 항력을 줄이기 위한 원형 단면의 동체를 설계하였고, 유리섬유 복합재를 사용한 모노코크 구조를 적용하여 가볍고 튼튼한 동체를 제작하였다. 또한 4.2m 태양광 무인기의 날개 형상에 최적화된 태양광 모듈을 구성하여 배열하였고, 23[in] × 23[in] 프로펠러를 적용한 추진시스템을 구성하여 충전 및 비행 효율을 향상시켰다. 개발된 태양광 무인기는 순항할 때 평균 55W를 소비하고, 주간에 최대 165W 에너지를 공급받을 수 있으며 비행실험을 통해 장기체공 성능을 검증하였다.

• 항공우주시스템공학회지
• /
• 제10권2호
• /
• pp.7-13
• /
• 2016

Multi disciplinary approach for aerodynamics, structure, propulsion, and flight control system is necessary to develop High Altitude Long Endurance Unmanned Aerial Vehicles (HALE UAV). Various HALE UAV development trends are surveyed to understand their operational requirements. Separating the UAV Take Off Weight by 150kg, Airworthiness implementation direction for HALE UAV is studied under the current Airworthiness regulations. NATO STANAG 4671 and STANAG 4703 Airworthiness certification criteria are analyzed, and their applicability was proposed for future HALE UAV development. In addition, minimization of the risk for UAV is studied by considering probability of cumulative catastrophic failure for HALE UAV. This Hazard Risk Index can support the future UAV Airworthiness Certification Criteria.

• 한국항공운항학회지
• /
• 제23권1호
• /
• pp.24-29
• /
• 2015

In order to increase endurance flight efficiency of long endurance electric powered UAV, main wing of UAV should have high aspect ratio and low structural weight. Since a spar which consists of thin and slender structure for weight reduction can cause catastrophic failure during the flight, it is important to develop verification method of structural integrity of the spar with the light weight design. In this paper, process of structural analysis using non-linear finite element method was introduced for the verification of structural integrity of the spar. The static strength test of the spar was conducted to identify structural characteristic under the static load. Then, the experimental result of the spar was compared to the analytical result from the non-linear finite element analysis. It was found that the developed process of structural analysis could predict well the non-linear structural behavior of the spar under ultimate load.

• 한국항공운항학회지
• /
• 제27권4호
• /
• pp.1-8
• /
• 2019

Recently, development of long endurance electric powered airplane has been conducted worldwidely. Light structural weight of a main wing with sufficient structural integrity is essential for long endurance flight. Since a main wing with a slender spar can occur catastrophic fracture under the flight, it is important to establish a design and verification method for both the weight reduction and structural integrity. In this paper, structural design and analysis of the main wing of HALE UAV with tubular spar reinforced with a bulkhead were introduced. The static strength test of the main wing was performed to verify structural integrity under the static load. Then, the experimental result was compared with an analytical result from a finite element analysis. It was concluded that the developed light weight main wing would have sufficient structural integrity under the flight operation.

• 한국항공운항학회지
• /
• 제22권2호
• /
• pp.27-33
• /
• 2014

There are several methods to improve the flight efficiency of HALE(High Altitude Long Endurance) UAV(Unmaned Aerial Vehicle). Airframe structural point of view, weight reduction of the airframe structure is the most important method to improve the flight efficiency. In order to reduce the weight of airframe structures, new concepts which are different from traditional airframe structure design such as the mylar wing skin should be introduced. The spar is the most important component in a mylar skin wing structure, so the spar weight reduction is the key point for reduction of the wing structural weight. In this study, design trade-off study for the front spar of the HALE UAV wing is conducted in order to reduce the weight. Design and analysis procedure of high aspect ratio wing spar are introduced. Several front spar structures are designed and trade-off study regarding the weight and strength for the each spar are performed. Spar design configurations are verified by the static strength test. Finally, optimal front spar design is decided and applied to the HALE UAV wing design.

• 한국운동역학회지
• /
• 제22권1호
• /
• pp.9-16
• /
• 2012

The purpose of this study was to compare and analyze muscle function and EMG of the trunk and the lower extremity in short and long distance athletes and in order to determine difference in peak torque per unit weight, muscle power per unit weight, endurance ratio, and %MVIC classified by muscle. For that purpose, isokinetic muscle function tests for waist, knee, and ankle joints and EMG measurements for the trunk and the lower extremity muscle with running motion were conducted for 7 short and long distance high school athletes respectively. The study over muscle function of waist, knee, and ankle joints indicates that peak torque per unit weight of short distance athletes is higher than that of long distance athletes in extension and flexion of waist joint, plantar flexion of right ankle joint, and dorsi flexion of left ankle joint. In case of the muscle power per unit weight of short distance athletes is also higher than long distance athletes in waist, knee, and ankle joints. No difference in endurance ratio of waist, knee, and ankle joints between the two groups was founded. The results of the test over EMG of the trunk and the lower extremity show that %MVIC of erector spinae, rectus femoris, vastus medialis, vastus lateralis, and tibialis anterior is higher than that of long distance athletes in support phase. The above results proved to be the same in flight phase except for %MVIC of medial gastrocnemius. In other words, %MVIC of medial gastrocnemius for short distance athletes turned out to be higher than that of long distance athletes in flight phase.

• 한국항공우주학회지
• /
• 제42권6호
• /
• pp.468-477
• /
• 2014

본 연구에서는 태양광 고고도 무인항공기가 어떻게 태양광 에너지만을 이용해서 지상에서 이륙, 상승비행을 하여 임무고도인 18 km 지점까지 도달할 수 있는지에 관한 연구를 수행하였다. 주익면적 $35.98m^2$와 가로세로비 25의 글라이더 형태의 항공기가 기준 항공기 형상으로 사용되었다. 미국 나사의 공개 프로그램인 OpenVSP와 XFLR5을 사용하여 형상변수 및 양력계수와 항력계수를 계산하였으며, 태양광으로부터의 가용에너지와 상승비행에 필요한 에너지 균형을 통해 항공기의 상승비행을 예측하였다. 각 고도에서 비행속도를 최소화하여 최소시간 상승비행이 가능하도록 하였고 이륙시간에 따른 임무고도 도달까지의 총소요시간과 소모되는 에너지량을 예측하였다. 또한 편서풍과 비행속도에 의한 항공기의 이동거리를 계산하였다.

• 한국항공운항학회지
• /
• 제22권3호
• /
• pp.68-73
• /
• 2014

Research is being carried out at Korea Aerospace Research Institute with aim of design a HALE UAV(High Altitude Long Endurance Unmanned Air Vehicle). HALE UAVs are ideally suited to provide surveillance, remote sensing and communication relay capabilities for both military and civilian applications. HALE UAVs typically cruise at an altitude between 15 km and 20 km, travelling at low speed and circling specific area of interest. Airframe structural point of view, weight reduction of the airframe structure is the most important method to improve the flight efficiency. High modulus CFRP(Carbon Fiber Reinforced Polymer) has been used in designing the structure in order to minimize the airframe weight. With respect to structural design and analysis, the key question is to decide an adequate airworthiness certification base to define suitable load cases for sizing of various structural components. In this study, FAR(Federal Aviation Regulation) 23 have constituted the guidance and benchmark throughout all structural studies. And the MSC/FlightLoads was introduced to analyze the flight loads for the HALE UAV. The MSC/FlightLoads can compute the flexible air load and analyzed loads are distributed on structural model directly. A preliminary structural concept was defined in accordance with the estimated inertial and aerodynamic loads. A FEM analysis was carried out using the MSC/Nastran code to predict the static and dynamic behaviour of UAV structure.

• 항공우주기술
• /
• 제12권1호
• /
• pp.1-9
• /
• 2013

태양전지 및 전기동력을 이용한 장기 체공 무인기의 체공 효율을 증가시키기 위해서는 구조 경량화가 필수적이다. 본 논문에서는 24시간 장기체공 전기동력 무인항공기인 EAV-2H의 주익 경량화 및 구조 건전성 확보를 위하여 Mylar Film과 섬유강화 복합재료로 구성된 주익을 설계하였다. 보이론 해석을 이용하여 주익 Spar의 형상 선정 및 구조 사이징을 수행하였다. EAV-2H 임무를 고려하여 하중해석을 수행하고 주익의 주요 구성품에 대해 유한요소해석을 수행하였다. 마지막으로 주익의 정적구조시험을 통해 주익의 구조 건전성을 확인하였다. 본 연구를 통하여 개발된 EAV-2H 주익은 이전 모델인 EAV-2에 비교하여 Span 기준 42%의 중량이 감소되었으며, 설계극한하중을 부가하는 정적구조시험을 통과하였다.

• 한국항공운항학회지
• /
• 제23권2호
• /
• pp.51-56
• /
• 2015

This paper presents the procedure of drag prediction for EAV-1, based on a numerical analysis correlated to an in-flight test. EAV-1, developed by Korea Aerospace Research Institute, is a small-sized UAV to test a hydrogen-fuel cell power system. The long-endurance test flight of 4.5 hours provides numerous in-flight data. The thrust and drag of EAV-1 during the flight test are estimated based on the wind-tunnel test results for EAV-1's propeller performance. In addition, the CFD analysis using a commercial Navier-Stokes code is carried out for the full-scale EAV-1. The computational result suggests that the initial CFD analysis substantially under-predicts the in-flight drag in that the discrepancy is up to 27.6%. Therefore, additional investigation for more accurate drag prediction is performed; the effect of propeller slipstream is included in the CFD analysis through "fan disk" modelling. Also, the additional drag from airplane trim and load factor that actually exists during the flight test in a circular path is considered. These supplemental analyses for drag prediction turn out to be effective since the drag discrepancy reduces to 2.3%.