• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.20 no.6
• /
• pp.47-54
• /
• 2018

The purpose of this study is to verify the long - range measurement performance for practical field application of VDMS. The reliability of the VDMS was verified by comparison with the existing monitoring sensor, GPS, Accelerometer and LDS. It showed the ability to accurately measure the dynamic displacement by tracking a motion of free vibration of target. And using the PSD function of measured data, the results in the frequency domain were also analyzed. We judged that VDMS is able to identify the higher system mode and has sufficient reliability. Based on the reliability verification, we conducted tests for long-distance applicability for actual application of VDMS. The distance from the stationary target model structure was increased by 50m interval, and the maximum distance was set to 400m. From the distance of 150m, the image obtained by the commercial camcorder has an error in the analysis, so the measured displacement comparison was performed between the LDS and the refractor telescope measurement results. In the measurement results of the displacement area of VDMS, the data validity was deteriorated due to the data shift by the external force and the quality degradation of the enlarged image. However, even under the condition that the effectiveness of the displacement measurement data of VDMS is low, the first mode characteristic included in the free vibration of the object is clearly measured. If the influence from the external environment is controlled and stable data is collected, It is judged that reliability of long-distance VDMS can be secured.

• ETRI Journal
• /
• v.34 no.6
• /
• pp.932-941
• /
• 2012

A powerful interaction mechanism is one of the key elements for the success of smart TVs, which demand far more complex interactions than traditional TVs. This paper proposes a novel interface based on the famous touch interaction model but utilizes long-range bare hand tracking to emulate touch actions. To satisfy the essential requirements of high accuracy and immediate response, the proposed hand tracking algorithm adopts a fast color-based tracker but with modifications to avoid the problems inherent to those algorithms. By using online modeling and motion information, the sensitivity to the environment can be greatly decreased. Furthermore, several ideas to solve the problems often encountered by users interacting with smart TVs are proposed, resulting in a very robust hand tracking algorithm that works superbly, even for users with sleeveless clothing. In addition, the proposed algorithm runs at a very high speed of 82.73 Hz. The proposed interface is confirmed to comfortably support most touch operations, such as clicks, swipes, and drags, at a distance of three meters, which makes the proposed interface a good candidate for interaction with smart TVs.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.3
• /
• pp.19-27
• /
• 2019

This paper proposes a new method using multi-layer overlapped windows to improve the performance of YOLO network which is vulnerable to detect small dense objects. In particular, the proposed method uses the YOLO Network based on the multi-layer overlapped windows to track small dense vehicles that approach from long distances. The method improves the detection performance for location and size of small vehicles. It allows crossing area of two multi-layer overlapped windows to track moving vehicles from a long distance to a short distance. And the YOLO network is optimized so that GPU computation time due to multi-layer overlapped windows should be reduced. The superiority of the proposed algorithm has been proved through various experiments using captured images from road surveillance cameras.

• Journal of the Korean Institute of Navigation
• /
• v.25 no.4
• /
• pp.371-379
• /
• 2001

We have reported the new measurement system which was substituted digital filter for the analog filter in order to develop the optimal system that could find the time delay between each sensors with high accuracy. And also we have confirmed through the experiments that the accuracy of measurements were differentiated by the methods what kind of digital filter had been adopted. This paper suggests two algorithms which approximate the sound source's bearing and distance. One is that sound source's relative bearing can be approximately regarded as the gradient of hyperbolic asymptote, the other is that the source's range can be approximated under the condition of a long range source relative to the sensor's interval. And a series of experiments were carried out with the source's distance 22.42meters and the random bearing interval within the limits of $-90^{\circ}$~$+90^{\circ}$. As a result, we have recognized that the approximation methods could measure the bearing and distance with higher accuracy than the method using trigonometric relation could do.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.11
• /
• pp.883-887
• /
• 2016

Navigating an unknown environment is a challenging task for a robot, especially when a large number of obstacles exist and the odometry lacks reliability. Pose tracking allows the robot to determine its location relative to its previous location. The ICP (iterative closest point) has been a powerful method for matching two point clouds and determining the transformation matrix between the maps. However, in a situation where odometry is not available and the robot moves far from its original location, the ICP fails to calculate the exact displacement. In this paper, we suggest a method that is able to match two different point clouds taken a long distance apart. Without using any odometry information, it only exploits the features of corner points containing information on the surroundings. The algorithm is fast enough to run in real time.

• Journal of Power Electronics
• /
• v.18 no.5
• /
• pp.1470-1478
• /
• 2018

Recently, wireless power transfer (WPT) via coupled magnetic resonances has attracted a lot of attention owing to its long operation distance and high efficiency. However, the WPT systems is over-coupling and a frequency splitting phenomenon occurs when resonators are placed closely, which leads to a decrease in the transfer power. To solve this problem, an adaptive frequency tracking control (AFTC) was used based on a closed-loop control scheme. An improved particle swarm optimization (PSO) algorithm was proposed with the AFTC to track the maximum power point in real time. In addition, simulations were carried out. Finally, a WPT system with the AFTC was demonstrated to experimentally validate the improved PSO algorithm and its tracking performance in terms of optimal frequency.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.15-22
• /
• 1996

In the soliton transmission system for a long-length and high bit rate data transmission systme using the nonlinear/dispersive optical fibers, the improtant problem is the loss characteristics and is the limited transmission rate by interaction forces. In this paper, It is explained the reasons of moved time position for the soliton peak value due to interaction force sof adjacent solitons. And for the analysis of interaction force affection level in the losslessmedia, we define the percent parameter of error rate due to the interaction forces and propose the optimum time distance of adjacent solitons by peak value tracking methods. With the results, initial percent of error is approximately 50% when itme difference between adjacent solitons is 5 times of funddametnal soliton pulse width. And it is confirmed that maximum transmission length of th esolitons is approximately 38 times of fundamental soliton period, which the maximum allowable percoent of error is 50%.

• Biomedical Science Letters
• /
• v.29 no.3
• /
• pp.103-108
• /
• 2023

Enhancers are cis-elements to regulate transcription of cell/tissue-specific genes in multicellular organisms. These elements locate in upstream or downstream regions of target genes and are found in a long distance up to 100 Kb in some cases. Transcription factors and coactivators bind to enhancers in a chromatin environment. Enhancers appear to facilitate the transcription of target genes by communicating with promoters and activating them. As transcription activation mechanism of enhancers, chromatin looping between enhancers and promoters, tracking of enhancer activity to promoters along the intervening regions, and movement of enhancers and promoters into transcription condensates have been suggested based on various molecular and cellular biology studies. These mechanisms are likely to act together rather than exclusive each other for gene transcription. Understanding of enhancer action mechanism may provide a way to regulate the transcription of cell/tissue-specific genes relating with aging or various diseases.

• Transactions on Control, Automation and Systems Engineering
• /
• v.3 no.4
• /
• pp.229-235
• /
• 2001

Recently, service area has been emerging field f robotic applications. Even though assistant robots play an important role for the disabled and the elderly, they still suffer from operating the robots using conventional interface devices such as joysticks or keyboards. In this paper we propose an efficient computer interface using real-time eye-gaze tracking system. The inputs to the proposed system are images taken by a camera and data from a magnetic sensor. The measured data is sufficient to describe the eye and head movement because the camera and the receiver of a magnetic sensor are stationary with respect to the head. So the proposed system can obtain the eye-gaze direction in spite of head movement as long as the distance between the system and the transmitter of a magnetic position sensor is within 2m. Experimental results show the validity of the proposed system in practical aspect and also verify the feasibility of the system as a new computer interface for the disabled.

• Current Optics and Photonics
• /
• v.3 no.1
• /
• pp.27-32
• /
• 2019

We present an autofocus tracking system implemented by the digital refocusing of digital holographic microscopy (DHM) and the tunability of an electrically tunable lens (ETL). Once the defocusing distance of an image is calculated with the DHM, then the focal plane of the imaging system is optically tuned so that it always gives a well-focused image regardless of the object location. The accuracy of the focus is evaluated by calculating the contrast of refocused images. The DHM is performed in an off-axis holographic configuration, and the ETL performs the focal plane tuning. With this proposed system, we can easily track down the object drifting along the depth direction without using any physical scanning. In addition, the proposed system can simultaneously obtain the digital hologram and the optical image by using the RGB channels of a color camera. In our experiment, the digital hologram is obtained by using the red channel and the optical image is obtained by the blue channel of the same camera at the same time. This technique is expected to find a good application in the long-term imaging of various floating cells.