• The Journal of Economics, Marketing and Management
• /
• v.3 no.4
• /
• pp.21-27
• /
• 2015

With the recent increasing interest in sustainability management, the latest environmental report tends to be substituted by the expanded sustainability management report. In this work, I would like to introduce the management pattern of a global enterprise that values environmental soundness (environmental friendly) and implements eco-friendly measures. The enterprise chosen in this study is FedEx. In this article, FedEx case is presented how companies can adopt environmental friendly management in their businesses. FedEx has maintained an eco-friendly management since the introduction of the company's eco-friendly transport trucks in 2003, following its development in 2000. In 2005, it installed a solar power plant that can supply up to 80% of the electricity consumed by Oakland Logistics Center in California, USA. FedEx has published the "Global Enterprise Citizenship Report," which contains its business developments in 2009. FedEx has worked hard to minimize the influence caused by packaging of goods to the environment and appealed to customers to use recycled products as much as they can. FedEx also encourages customers to use packaging materials efficiently. A considerable amount of energy has been expended in the eco-friendly programs of FedEx. Although thousands of FedEx vehicles and aircraft operate daily with using large amounts of electricity and fuel, FedEx focuses on energy savings and global environment protection.

• The Journal of Bigdata
• /
• v.4 no.2
• /
• pp.159-173
• /
• 2019

Last-Mile delivery optimization plays a key role in the urban supply chain operation, which is the most expensive and time-consuming and most complicated part of the whole delivery process. The urban consolidation center (UCC) is regarded as a significant asset for supporting customer demand in the last-mile delivery service. It is the key benefit of UCC to improve the load balance of vehicles and to reduce the total traveling distance by finding the better route with the well-organized multi-leg vehicle journey in the urban area. This paper presents the model using multiple scenario analysis integrated with mathematical optimization techniques using Geographic Information System (GIS). The model aims to find the best solution for the distribution network consisted of DC and UCC, which is applied to the case of Ulaanbaatar Mongolia. The proposed methodology integrates two sub-models, location-allocation model and vehicle routing problem. The multiple scenarios devised by selecting locations of UCC are compared considering the general performance and delivery patterns together. It has been adopted to make better decisions the quantitative metrics such as the economic value of capital cost, operating cost, and balance of using available resources. The result of this research may help the manager or public authorities who should design the distribution network for the last mile delivery service optimization using UCC within the urban area.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.124-140
• /
• 2017

There exists a limitation to provide proper advance information for safe maneuvering through guidance and caution signs in freeway mobile work zones, unlike fixed work zones. Although a work-protection vehicle is currently deployed at the rear of the work vehicle, more active countermeasures to prevent crashes are required. The purpose of this study was to propose a method to evaluate the safety in mobile work zones and to present effective countermeasures. Driving simulation experiments were conducted to analyze characteristics of driver's behavior in mobile and fixed work zones. Safety distance index (SDI) based on the comparison of stopping distances of a work-protection vehicle and a following subject vehicle was used to evaluate traffic safety. More dangerous driving behavior was observed in the mobile work zone. Especially, it was identified that the lane-change of vehicles following the work- protection vehicle was late. Therefore, it is necessary to actively introduce methods to provide warning information so that the driver can recognize the work-protection vehicle in advance and carry out appropriate evasive maneuvers.

• Journal of Korean Society of Transportation
• /
• v.31 no.1
• /
• pp.37-46
• /
• 2013

Lane closure in freeway work zone due to maintenance and repair of freeway facilities results in abrupt change of traffic flow. Sudden change of traffic flow results strong interactions among vehicles, and reduces capacity compared to the ordinary traffic condition. Such capacity reduction is likely to cause congestion, traffic queues, and economic loss cost. This study aims to determine the base capacity for a short-term freeway work zone that can be used to establish a work zone schedule in advance without any traffic impact. First, the research collected detector data and schedule data of road works on all freeways in Korea. Second, the research determined 23 study sites finding the capacity values of work zone after matching two kinds of data. All study sites had varying characteristics regarding traffic flow being adjacent to work zone during road works. The capacity values were reviewed in terms of lane closure configuration, the types of work, and design speed. Finally, research proposed capacity values for a short-term freeway work zone with the design speeds of 100 kph, 120 kph and 1,700 pcphpl, 1,750 pcphpl, respectively.

• Journal of Convergence for Information Technology
• /
• v.7 no.3
• /
• pp.27-36
• /
• 2017

In almost industries, such as the logistics industry, marine fisheries, agriculture, industry, and services, small unmanned aerial vehicles are used for aerial photographing or closing flight in areas where human access is difficult or CCTV is not installed. Also, based on the information of small unmanned aerial photographing, application research is actively carried out to efficiently perform surveillance, control, or management. In order to carry out tasks in a mission-based manner in which the set tasks are assigned and the tasks are automatically performed, the small unmanned aerial vehicles must not only fly steadily but also be able to charge the energy periodically, In addition, the unmanned aircraft need to land automatically and precisely at certain points after the end of the mission. In order to accomplish this, an automatic precision landing method that leads landing by continuously detecting and recognizing a marker located at a landing point from a video shot of a small UAV is required. In this paper, it is shown that accurate and stable automatic landing is possible even if simple template matching technique is applied without using various recognition methods that require high specification in using low cost general purpose small unmanned aerial vehicle. Through simulation and actual experiments, the results show that the proposed method will be made good use of industrial fields.

• Journal of the Korean Society for Railway
• /
• v.15 no.4
• /
• pp.334-342
• /
• 2012

It is connected with various gauges existing in Euro-Asian continents. Such differences impedes the operation seriously as on the contact of railway tracks of different gauge the cargo must be either transshipped or the running assemblies of rail vehicles must be exchanged. Those operations are costly, time-consuming and require extended infrastructure together with very expensive storage and transshipment facilities at border-crossing point. Moreover, those operations extend transportation time considerably. Therefore, effectiveness of railway transportation systems significantly depends on track gauge change 1435/1520mm, which connects with complicated handling-shifting operations. The paper concerns assessment of effectiveness in strategical rail systems with gauge changing. The paper presents short description of transport system with gauge changing and initial assessment of shifting technologies. Method of system assessment comparison based on Life Cycle Cost model is described here as well.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.3
• /
• pp.233-242
• /
• 2015

This paper analyzes a multi-product inbound lot-sizing and outbound dispatching problem with multi-vehicle types in a third-party logistics distribution center. The product must be delivered to the customers within the delivery time window and backlogging is not allowed. Replenishing orders are shipped by several types of vehicles with two types of the freight costs, i.e., uniform and decreasing, are considered. The objective of this study is to determine the lot-size and dispatching schedules to minimize the total cost with the sum of inbound and outbound transportation and inventory costs over the entire time horizon. In this study, we mathematically derive a mixed-integer programming model and propose a genetic algorithm (GA1) based on a local search heuristic algorithm to solve large-scale problems. In addition, we suggest a new genetic algorithm (GA2) with an adjusting algorithm to improve the performance of GA1. The basic mechanism of the GA2 is to provide an unidirectional partial move of products to available containers in the previous period. Finally, we analyze the results of GA1 and GA2 by evaluate the relative performance using the gap between the objective values of CPLEX and the each algorithm.

• Journal of Advanced Navigation Technology
• /
• v.18 no.6
• /
• pp.562-568
• /
• 2014

This study is safety assessment standard for advanced surface movement guidance control system (A-SMGCS) and case study of the past research project. A-SMGCS providing routing, guidance and surveillance for the control of aircraft and vehicles in order to maintain the declared surface movement rate under all weather conditions within the aerodrome visibility operational level while maintaining the required level of safety. Recently, in korea and europe are developing A-SMGCS system for the safety control of the airport movement area. In safety oriented industry such as aviation that it is necessary to verify and ensure for operating system. In this case study, analysis of safety assessment standard for verified A-SMGCS target level of safety (TLS) and previous developed A-SMGCS research project.

• Asian Journal of Atmospheric Environment
• /
• v.5 no.1
• /
• pp.41-46
• /
• 2011

The port of Busan is the fifth busiest container port in the world in terms of total mass of 20-foot equivalent units transported. Yet no attempts have been made to estimate the greenhouse gas (GHG) emissions from the port of Busan by accounting for all port-related activities of the various transportation modes. With these challenges in mind, this study estimates the first activity-based GHG emissions inventory in the port of Busan, which consists of four transportation modes: marine vessels, cargo-handling equipment, heavy-duty trucks, and railroad locomotives. The estimation results based on the most recent and complete port-related activity data are as follows. First, the average annual transportation GHG emission in the port of Busan during the analysis period from 2000 to 2007 was 802 Gg $CO_2$-eq, with a lower value of 773 Gg $CO_2$-eq and an upper value of 813 Gg $CO_2$-eq. Second, the increase in the transportation-related GHG emissions in the port of Busan during the analysis period can be systematically explained by the amount of cargo handled ($R^2$=0.98). Third, about 64% of total GHG emissions in the port of Busan were from marine vessels because more than 40% of all maritime containerized trade flows in the port were transshipment traffic. Fourth, approximately 22% of the total GHG emissions in the port of Busan were from on-road or railroad vehicles, which transport cargo to and from the port of Busan. Finally, the remaining 14% of total GHG emissions were from the cargo handling equipment, such as cranes, yard tractors, and reach stackers.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.2
• /
• pp.207-218
• /
• 2017

Improving fuel consumption, particularly that of commercial vehicles, has become a global concern. The reduction in logistics cost has been a key issue in efforts to improve fuel economy and efficiency of transportation equipment. Typical technologies for reducing reduce fuel usage include air resistance reduction technologies, tire rolling resistance technologies, and idle technologies among others. Air resistance technology is a highly effective method that can be easily applied in a short period. As with air resistance technology, several devices involving side skirt, boat tail and gap fairing have been developed based on an analytical 3-D modeling technique for reducing air resistance attributed to the vehicle configuration. The devices were on a 45 feet tractor-trailer and the emission test was done using PEMS equipment. Fuel economy was evaluated by introducing several devices to reduce outer air resistance. The test was conducted by changing the experimental method of SAE J1321 Joint TMC/SAE Fuel Consumption Test Procedure - Type II test. As a result, air resistance decreased by at least 15 % and fuel economy improved by at least 13 %. This study sought to reduce greenhouse gas and improve fuel economy by applying several devices to a test vehicle to lower air resistance.