• 한국해양학회지
• /
• v.23 no.3
• /
• pp.130-145
• /
• 1988

Spatial distribution and temporal variations of phytoplankton population were investigated in Ch$\check{o}$nsu Bay, the Korean western coast. Diurnal fluctuations of phytoplankton standing crop are associated with semidiurnal tidal cycle, as high concentration at low tide and low at high tide. In monthly variations of phytopolankton standing crop, the 1st peak occurrs in March and the 2nd one in August. The study area could be divided into two parts, outer bay and inner bay according to the physical and biological factors such as water temperature and salinity, and phytoplankton distribution patterns. The northern waters of the bay, however, may be affected by irregular fresh water influx through the lock of the dike. Because of the hydrographical differences among the surveyed stations, phytoplankton species succession patterns of each station have some differences. On the whole in this study area, Paralia sulcata and Skeletonema costatum are dominant species all the year round. However, except June, Paralia sulcata, a tychopelagic diatom is not dominant species at Station 6 (northern end of the bay). This seems to be caused by the fact that the waters of northern part of the bay is less turbulent than that of the outer bay. The result of principal component analysis (PCA) indicates that Ch$\check{o}$nsu Bay is normal coastal ecosystem where the environmental conditions are cycled in a year, and water temperature and nitrogenous nutrients such as nitrate, nitrite and ammonia are major factors to influence the annual cycle of environmental conditions.

• Fire Science and Engineering
• /
• v.24 no.3
• /
• pp.131-138
• /
• 2010

Experimental and numerical studies were conducted to investigate the thermal and chemical characteristics of heptane fires in a full-scale ISO 9705 room. Representative fire conditions were considered for over-ventilated fire (OVF) and under-ventilated fire (UVF). Fuel flow rate and doorway width were changed to create OVF and UVF conditions. Detailed comparisons of temperature and species concentrations between experimental and numerical data were presented in order to validate the predictive performance of FDS (Fire Dynamic Simulator). The OVF and UVF were explicitly characterized with distributions of temperature and product formation measured in the upper layer, as well as combustion efficiency and global equivalence ratio. It was shown that the numerical results provided a quantitatively realistic prediction of the experimental results observed in the OVF conditions. For the UVF, the numerically predicted temperature showed reasonable agreement with the measured temperature. The predicted steady-state volume fractions of $O_2$, $CO_2$, CO and THC also agreed quantitatively with the experimental data. Although there were some limitations to predict accurately the transient behavior in terms of CO production/consumption in the UVF condition, it was concluded that the current FDS was very useful tool to predict the fire characteristics inside the compartment for the OVF and UVF.

• Journal of Oral Medicine and Pain
• /
• v.33 no.4
• /
• pp.387-394
• /
• 2008

Purpose : The purpose of this study was to verify the usefulness and feasibility of ultrasonographic imaging for the detection of the disorders of the surrounding supporting structure such as articular capsule, retrodiscal tissue and related ligaments, osteoarthritic evidence and associated disc displacement at the temporomandibular joint(TMJ) Materials and Methods : 20 patients(40 joints) with periodic lock and crepitations were investigated prospectively using 12 MHz array transducer. Ultrasonographic Imagings were assessed for osteoarthritic surface changes of condyle, extent of disc displacement and disorders of surrounding structures. Ultrasonographic images were compared with clinical investigations, conventional radiography and Dental Computed Tomographic scans. Results : In clinical and conventional radiography, osteoarthritic changes were diagnosed in 8 joints. Ultrasonographically 7 of the 8 osteoarthritic changes were diagnosed correctly. Sensitivity, specificity, and accuracy of ultrasonography in the osteoarthritic detections were 87.5%, 62.5%, and 67.5% respectively. About the detection of disc displacement, disc displacement were diagnosed in 21 joints clinically. Ultrasonographically 19 of the 21 disc displacements were diagnosed correctly. Sensitivity, specificity, and accuracy of ultrasonography in the osteoarthritic detections were 95%, 90%, and 92.5% respectively. when the disorders of supportive structure were figured out, the disorders of supportive structure were diagnosed in 18 joints clinically. Ultrasonographically 1 of the 18 the disorders of supportive structure were diagnosed correctly. Sensitivity, specificity, and accuracy of ultrasonography in the osteoarthritic detections were 5.5%, 4.5%, and 55% respectively. Conclusion : Ultrasonography is an relatively reliable diagnostic tool for the detection of disc displacement and some of osteoarthritic changes. But it's not an insufficient imaging technique for the detection of the disorders of the surrounding structure.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.2 s.38
• /
• pp.139-150
• /
• 1991

The purpose of this study is to do the Somatotype classification according to the type of shoulder-neck and to give the thinkness of shoulder pad according to them. Therefore this study was measurement body size of 201 and the somatotypes were classified as their plumb line. The standard somatotype of this measurement was classified as 9 type according to its angle of shoulder inclination and neck length. Pads which have different thickness (1 cm, 1.5 cm, 2 cm) were attached to the 9 body type and the set-in sleeve blouse and raglan sleeve blouse were made and tring test and sensory test were accomplished. The results of this study were as follows: 1 . Classification of shoulder-neck relationship. Angles of shoulder inclination ($15^{\circ},\;21^{\circ},\;27^{\circ}$), lock lenaths (10 cm, 12.5 cm, 15 cm) were classi- fied as 3 type each and these types were combined as 9 types. II . The result of angle difference of shoulder inclination according to pad thickness. 1) In case of set-in pad. angle is increased $5.75^{\circ}$ per 1 cm of pad thickness. 2) In case of raglan pad. angle is increased $6.45^{\circ}$ per 1 cm of pad thickness. III. The most fit pad thickness to the 9 types. In case of set-in sleeve blouse. 1) High shoulder-long neck, Standard shoulder-long neck Low shoulder-long neck, Stan-dard shoulder·standard neck. Low shoulder-standard neck: 1.5 cm. 2) High shoulder-standard neck, Standard shoulder-short neck, Low shoulder-short neck: 1 cm. 3) High shoulder-short neck: 0 cm(without pad) In case of raglan sleeve blouse. 4) High shoulder-long neck, Standard shoulder-long neck, Low shoulder·long neck, Stan-dard shoulder-standard neck, Low shoulder-standard neck: 1.5 cm. 5) High shoulder-standard neck, Standard shoulder-short neck, Low-shoulder-short neck: 1 cm. 6) High shoulder-short neck: 0 cm(without pad)

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.275-283
• /
• 2016

In this study, three knee-orthoses (dial lock type, medium size, right side) were used for a quality level test (static bending test and solidity test of the locking system) of the knee-orthosis locking system. In the static bending test, a smaller maximum load was observed in samples A and C compared to the reference standard value (KS P 8408 standard value: 1000 N, sample A: 865 N, sample C: 833 N). In addition, in the solidity test of the locking system, a smaller maximum load was observed in the all samples compared to the referenced standard value (KS P 8411 standard value: 200 N, sample A: 41 N, sample B: 97 N, sample C: 54 N). Korean industrial standards for knee-orthoses and systematic test methods are lacking. Therefore, a systematic management plan for knee-orthoses is required. The result of the current study showed that a systematic management plan for the knee-orthosis locking system is required. In particular, the development of a quantitative and objective test method is needed. The findings of the current study may be useful for monitoring the quality of the knee-orthosis locking system and may provide foundational information for the development of a quantitative and objective test method.

• Land and Housing Review
• /
• v.12 no.4
• /
• pp.41-59
• /
• 2021

This study reviews theoretical considerations and past studies about real estate prices, macroeconomic variables, and real estate policies. Monthly data from January 2003 to June 2021 are used, and a VEC model, the most widely used multivariate time series analysis method, is employed for analysis. Through the model, the effects of macroeconomic variables and real estate regulatory policies on real estate prices in Seoul are analyzed. Findings are summarized as follows. First, macroeconomic variables such as money supply and interest rates do not have a significant impact on Seoul's apartment prices. Due to the high demand for housing and insufficient supply, there is a demand for buying a home regardless of macroeconomic booms or recessions. Second, tax and financial regulatory policies have an initial impact on the rise in apartment prices in Seoul, and their influence diminishes over time. Third, anti-speculation zones are expected to decrease apartment prices through the suppression of demand. However, these zones cause a rise in apartment prices. This could be understood as a lock-in effect due to the strengthening of capital gains tax. Fourth, the price ceiling did not decrease apartment prices. These findings propose that, in Seoul, where demand is high and supply is insufficient, the supply of high-quality and sufficient housing should be prioritized over various regulations such as tax regulations, financial regulations, anti-speculation zones, and price caps. Moreover, the findings provide an implication that city-specific real estate policies should be implemented for Seoul rather than regulation-oriented approaches in public policy.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.80-87
• /
• 2006

SONY corporation preoccupies $80\%$ of a market of the CCD used in a CCTV system. The CCD of SONY have high duality which can not follow the progress of capability. But there are some problems which differ the clock frequency used in CCD from the frequency used in common video encoder. To get the result by using common video encoder, the system needs a scaler that could adjust image size and PLL that synchronizes CCD's with encoder's clock So, this paper proposes the video encoder that is activated at equal clock used in CCD without scaler and PLL. The encoder converts ITU-R BT.601 4:2:2 or ITU-R BT.656 inputs from various video sources into NTSC or PAL signals in CVBS. Due to variable clock, property of filters used in the encoder is automatically changed by clock and filters adopt multiplier-free structures to reduce hardware complexity. The hardware bit width of programmable digital filters for luminance and chrominance signals, along with other operating blocks, are carefully determined to produce hish-quality digital video signals of ${\pm}1$ LSB error or less. The proposed encoder is experimentally demonstrated by using the Altera Stratix EP1S80B953C6ES device.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.1
• /
• pp.22-29
• /
• 2008

Purpose: The purpose of this study is to test the efficacy of various methods of fat harvesting in animal model by viability comparison with assay including cell counting, MTT assay, and histologic evaluation. Materials and methods: New Zealand white rabbits experiments were used. Groin fat pads were subjected to different harvest method varying ingredients of solution(Experiment 1: T1 solution= lidocaine 1000mg/L, epinephrine 1mg/L, sodium bicarbonate 10mgEq/L, Triamcinolone 10mgEq/L; T2 solution=lidocaine 1000mg/L, epinephrine 1mg/L, sodium bicarbonate 0mgEq/L, Triamcinolone 0mgEq/L) and pressure exerted on harvesting with Luer-Lock syringe connected to suction cannula.(Experiment 2: P1 group=3cc intermittent pressure; P2 group=10cc sustained pressure) Fat cell viability was assessed with cell counting with a hemocytometer, MTT assay, and histologic evaluation. Results: Experiment 1 Cell count: T1=2.4/3.4/4.2, T2=9.6/8.4/7.2($\times10^5$ per mL); MTT assay: T1=0.516/0.41/0.453/0.412/0.421, T2=0.925/0.765/0.54/0.634/0.614 in 21 days(absorbance); Histology: T1 showed elongated and, different in size and shape, and ruptured adipocytes with only a few normal adipocytes whereas T2 showed central core of fat with almost intact fat cells Experiment 2 Cell count: P1=1.2/3.2/4.2, P2=1.2/2.4/3.8($\times10^5$ per mL); MTT assay:P1=0.256/0.245/0.258/0.21/0.264, P2=0.12/0.231/0.245/0.313/0.281 in 21 days(absorbance); Histology: P1 showed somewhat evenly distributed normal-looking fat cells and P2 showed relatively irregular shape of fat cells with small blood vessel amongst adiopocytes. Conclusion: Viability was higher in ‘modified tumescent solution’without sodium bicarbonate and triamcinolone and we also found no significantly different viability between using intermittent pressure and using sustained pressure. But in terms of initial viability of fat cell, we can assume that lower intermittent pressure would make better clinical results.

• Journal of Navigation and Port Research
• /
• v.29 no.6 s.102
• /
• pp.481-485
• /
• 2005

The port entry system of the inner harbor in Pyeongtaek${\cdot}$Dangjin was planned as lock-gate in 'Master plan project on port planning in Asan industry base(1990)‘, but was changed to tidal harbor in 'Project maintaining Master plan for comprehensive development of Pyeongtaek${\cdot}$Dangjin port(2001)'. Accordingly, southern sea bank constructed under the lower part of Seohae-bridge will be removed so that inbound/outbound vessels for the inner harbor can navigate at all times. However, in the view of the safety on passing through the lower of Seohae-bridge, navigating conditions for the inner harbor will be restricted in the single-way of 50,000 DWT vessel and the two-way of vessel less than 30,000 DWT Therefore, this study carried out the estimation of traffic congestion arising from these vessels with above restrictions q[ter supposing annual inbound/outbound vessel's numbers for loading and unloading cargo surveyed on the inner harbor.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.191-195
• /
• 2005

The port entry system of the inner harbor in Pyeongtaek (Asan) was planned as lock-gate in 'Master plan project on port planning in Asan industry base(1990)', but was changed to tidal harbor in 'Project maintaining Master Plan for comprehensive development of Pyeongtaek (Asan) port(2001)'. Accordingly, southern sea bank constructed under the lower part of Seohae-bridge will be removed so that inbound/outbound vessels for the inner harbor can navigate at all times. However, in the view of the safety on passing through the lower of Seohae-bridge, navigating conditions for the inner harbor will be restricted in the single-way of 50,000 DWT vessel and the two-day of vessel less than 30,000 DWT. Therefore, this study carried out the estimation of traffic congestion arising from these vessels with above restrictions after supposing annual inbound/outboubd vessel's numbers for loading and unloading cargo surveyed on the inner harbor.