• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.986-989
• /
• 2006

앞으로의 네트워크는 Convergence와 Integrate라는 키워드를 기반으로 IP 중심의 통합된 망으로 발전되고 있다. IP 중심의 망은 각각의 다양한 access 기술을 포함하며, voice, multimedia, 그리고 새롭게 정의되는 서비스가 모두 제공될 수 있어야 한다. 따라서 점차 인터넷을 중심으로 하는 하나의 통합된 망의 형태로 진화 될 것이다 이러한 차세대 네트워크상의 단말은 소형화, 지능화, 그리고 이동성을 지니고 있으며, 다양한 access 기술을 사용하기 위한 multiple 인터페이스를 가진 멀티호밍 환경에 놓여있다. 따라서 이 네트워크는 기본적으로 이동성과 멀티호밍을 지원해야 하는 것이다. 그러나 현재 인터넷의 핵심인 Internet Protocol 구조는 이를 지원하지 못한다. 현재 IP 주소는 최종 단말의 식별자 (Identifier)와 단말의 위치 식별자 (locator)의 의미를 함께 사용하고 있어, 통신 중인 단말이 이동하면 IP 주소도 변경되어 통신 중인 세션이 끊기는 문제가 발생한다. 멀티호밍 환경에서도 역시 통신 중인 노드들의 경로를 바꾸게 되면 세션이 끊기게 되는 문제가 발생한다. 본 논문은 이와 같은 린 구조의 근본적인 문제를 해결하기 위해 Identifier와 locator를 분리하며, 단순하게 단말에 스택으로 존재하는 L3SHIM을 소개하고, 모든 단말에 이 기능이 지원되었을 때 기존의 인터넷 프로토콜의 확장과 인터넷의 구조에 어떤 영향을 줄 수 있는지에 대해 선행 연구를 하였다.

• Journal of Communications and Networks
• /
• v.13 no.6
• /
• pp.612-620
• /
• 2011

Recently, one of the problems with the Internet is the issue of scalability. To this end, locator/identifier separation protocol (LISP), which separates end-system identifiers and routing locators, has been proposed as a solution. In the LISP deployed network, the ingress and egress nodes of inter-AS traffic is determined by edge router selection (ERS) and endpoint identifier-routing locator mapping assignment (ERMA). In this paper, joint optimizations of ERS and ERMA for stub networks with and without predetermined link weights are studied and the mixed integer linear programming (MILP) formulations for the problems are given. To make the problem with optimizable link weights tractable, a revised local search algorithm is also proposed. Simulation results show that joint optimization of ERS and ERMA enables better network performance.

• Electronics and Telecommunications Trends
• /
• v.20 no.4 s.94
• /
• pp.189-197
• /
• 2005

앞으로의 인터넷은 무선 구간의 일반화와 더불어 디바이스들의 소형화, 지능화로 인해이동성이 무엇보다도 강조되는 시점이다. 또한 다양한 서비스의 제공 및 보안을 위한 QoS, security, 그리고 계속적인 서비스를 받기 위한 멀티호밍 환경 등 인터넷은 많은 새로운 기술들을 필요로 하고 있다. 이러한 기술들 중 이동성과 멀티호밍은 지원되어야 할 기본적인 프로토콜들이다. 그러나 인터넷의 핵심인 IP 아키텍처 중 IP 주소는 최종 단말의 식별자(identifier)와 단말의 위치 식별자(locator)의 의미를 함께 사용하고 있어, 이동성 및 멀티호밍으로 통신중인 단말의 IP 주소가 변경되면 통신중인 세션이 끊기는 문제가 발생한다. 본 논고는 이와 같은 IP 주소의 근본적인 중첩 문제를 해결하기 위해 제한된 identifier와 locator 분리에 관한 기술 동향 및 IETF의 표준화 동향을 소개한다.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.2
• /
• pp.116-124
• /
• 2016

PURPOSE. The aim of the present study was to evaluate, by means of strain gauge analysis, the effect of different implant angulations on strains around two implants retaining mandibular overdenture with Locator attachments. MATERIALS AND METHODS. Four duplicate mandibular acrylic models were constructed. Two implants were inserted in the canine regions using the following degrees of distal inclinations: group I (control); $0^{\circ}$, group II; $10^{\circ}$, group III; $20^{\circ}$, and group IV; $30^{\circ}$. Locator pink attachments were used to connect the overdenture to the implants and Locator red (designed for severely angled implants) was used for group IV (group $IV_{red}$). For each group, two linear strain gauges were attached at the mesial and distal surfaces of the acrylic resin around each implant. Peri-implant strain was measured on loading and non-loading sides during bilateral and unilateral loading. RESULTS. For all groups, the mesial surfaces of the implants at loading and non-loading sides experienced compressive (negative) strains, while the distal implant surfaces showed tensile (positive) strains. Group IV showed the highest strain, followed by group III, group II. Both group I and group $IV_{red}$ showed the lowest strain. The strain gauges at the mesial surface of the loading side recorded the highest strain, and the distal surface at non-loading side showed the lowest strain. Unilateral loading recorded significantly higher strain than bilateral loading. CONCLUSION. Peri-implant strains around two implants used to retain mandibular overdentures with Locator attachments increase as distal implant inclination increases, except when red nylon inserts were used.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.8 s.197
• /
• pp.116-121
• /
• 2007

The length of root canal has to be measured for endodontic treatment. Several electronic apex locators were developed to measure the length of root canal by other researchers. And their accuracies were verified by X-ray or micrometer method. But these methods did not consider the non-linear bends of pulp and had ${\pm}0.5mm$ error which was large enough to measure the length of root canal. The purpose of this study is the introduction of a new method to measure the length of root canal and the verification of the accuracy of an electronic apex locator using a Micro-CT. The length of root canal of 6 teeth were measured with the electronic apex locator. When the electronic apex locator reads 0.5, 0.6, 0.7, 0.8, 0.9 and 1.0 mm length of the file which was inserted in the hole of the tooth to measure the length of root canal. The average (${\pm}$Standard deviation) length of root canal of 6 teeth measured by the Micro-CT was $0.49{\pm}0.03,\;0.59{\pm}0.04,\;0.68{\pm}0.03,\;0.78{\pm}0.03,\;0.90{\pm}0.04\;and\;1.01{\pm}0.03mm$, respectively. The maximum error of the electronic apex locator was 0.06 mm.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.3
• /
• pp.207-214
• /
• 2015

Due to the limitations of conventional removable partial denture prostheses to treat a cleft lip & palate patient who shows scar tissue on upper lip, excessive absorption of the maxillary residual alveolar ridge, and class III malocclusion with narrow palate and undergrowth of the maxilla, 4 implants were placed on the maxillary edentulous region and a maxillary removable implant-supported partial denture was planned using a CAD/CAM milled titanium bar. Unlike metal or gold casting technique which has shrinkage after the molding, CAD/CAM milled titanium bar is highly-precise, economical and lightweight. In practice, however, it is very hard to obtain accurate friction-fit from the milled bar and reduction in retention can occur due to repetitive insertion and removal of the denture. Various auxiliary retention systems (e.g. $ERA^{(R)}$, $CEKA^{(R)}$, magnetics, $Locator^{(R)}$ attachment), in order to deal with these problems, can be used to obtain additional retention, cost-effectiveness and ease of replacement. Out of diverse auxiliary attachments, $Locator^{(R)}$ has characteristics that are dual retentive, minimal in vertical height and convenient of attachment replacement. Drill and tapping method is simple and the replacement of the metal female part of $Locator^{(R)}$ attachment is convenient. In this case, the $Locator^{(R)}$ attachment is connected to the milled titanium bar fabricated by CAD/CAM, using the drill and tapping technique. Afterward, screw holes were formed and 3 $Locator^{(R)}$ attachments were secured with 20 Ncm holding force for additional retention. Following this procedure, satisfactory results were obtained in terms of aesthetic facial form, masticatory function and denture retention, and I hereby report this case.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.1
• /
• pp.12-21
• /
• 2022

PURPOSE. The purpose of this study was to investigate changes in retention and wear pattern of Locator^® and ADD-TOC attachments on a digital milled bar by performing chewing simulation and repeated insertion/removal of prostheses in fully edentulous models. MATERIALS AND METHODS. Locator (Locator^®; Zest Anchors Inc., Escondido, CA, USA) was selected as the control group and ADD-TOC (ADD-TOC; PNUAdd Co., Ltd., Busan, Republic of Korea) as the experimental group. A CAD-CAM milled bar was mounted on a master model and 3 threaded holes for connecting a bar attachment was formed using a tap. Locator and ADD-TOC attachments were then attached to the milled bar. Simulated mastication and repeated insertion/removal were performed over 400,000 cyclic loadings and 1,080 insertions/removals, respectively. Wear patterns on deformed attachment were investigated by field emission scanning electron microscopy. RESULTS. For the ADD-TOC attachments, chewing simulation and repeated insertion/removal resulted in a mean initial retentive force of 24.43 ± 4.89 N, which were significantly lower than that of the Locator attachment, 34.33 ± 8.25 N (P < .05). Amounts of retention loss relative to baseline for the Locator and ADD-TOC attachments were 21.74 ± 7.07 and 8.98 ± 5.76 N (P < .05). CONCLUSION. CAD-CAM milled bar with the ADD-TOC attachment had a lower initial retentive force than the Locator attachment. However, the ADD-TOC attachment might be suitable for long-term use as it showed less deformation and had a higher retentive force after simulated mastication and insertion/removal repetitions.

• The Journal of the Korean dental association
• /
• v.55 no.8
• /
• pp.528-536
• /
• 2017

Treatment with removable partial denture is effective for partially edentulous patients who are unable to obtain sufficient retention and stability for functional and esthetic restoration. There are several cases reporting the improvement of retention and stability of the partial denture using a small number of implants. However, there are limited studies on the implant-assisted removable partial denture using a small number of remaining teeth and the bar locator system. The bar locator system has an advantage in that it could compensate the angle of insertion of removable prosthesis on implant with inconsistent placement angle due to anatomical constraints compared to when using the locator only. This case report describes the patient with $Parkinson^{\circ}$Øs disease who was treated with the Locator bar system using two previously placed implants and two remaining teeth on maxilla. No additional implants could be placed because of the medical and economic condition of the patients, and the angle of one of two implants could not be matched with the direction of the removable partial denture insertion. Considering the angle of the implants, the patient was treated with implant-assisted RPD using the Locator bar system and had satisfactory results in the aspect of esthetics, masticatory function, and oral hygiene maintenance.

• ETRI Journal
• /
• v.38 no.4
• /
• pp.612-621
• /
• 2016

A new time-domain decoder for Reed-Solomon (RS) codes is proposed. Because this decoder can correct both errors and erasures without computing the erasure locator, errata locator, or errata evaluator polynomials, the computational complexity can be substantially reduced. Herein, to demonstrate this benefit, complexity comparisons between the proposed decoder and the Truong-Jeng-Hung and Lin-Costello decoders are presented. These comparisons show that the proposed decoder consistently has lower computational requirements when correcting all combinations of ${\nu}$ errors and ${\mu}$ erasures than both of the related decoders under the condition of $2{\nu}+{\mu}{\leq}d_{\min}-1$, where $d_{min}$ denotes the minimum distance of the RS code. Finally, the (255, 223) and (63, 39) RS codes are used as examples for complexity comparisons under the upper bounded condition of min $2{\nu}+{\mu}=d_{\min}-1$. To decode the two RS codes, the new decoder can save about 40% additions and multiplications when min ${\mu}=d_{min}-1$ as compared with the two related decoders. Furthermore, it can also save 50% of the required inverses for min $0{\leq}{\mu}{\leq}d_{\min}-1$.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.12
• /
• pp.1229-1235
• /
• 2008

ELT(emergency locator transmitter) has assisted in the rescue of thousands of lives in distress. Aviators, mariners and land users being equipped with distress beacons are capable of transmitting distress signals to the satellites in emergency situations anywhere in the world. In this paper, Drop/Impact simulation was performed for ELT Body-case. FE model for Body-case was constructed with MSC/Dytran and refined using the Karas example simulation for Body-case prototype. Shock/impact survivability analysis was performed for ELT operations. FE model constructed with MSC/Nastran. Transient response analysis for refined ELT model was perfomed for ELT under impact shock loading condition.