• 제목/요약/키워드: Location Type

검색결과 2,655건 처리시간 0.026초

GIS의 도파관 특성을 고려한 절연결함 위치판정에 관한 연구 (A Study for the Fault Location of Insulation Defects considering Waveguide Characteristics in GIS)

  • 이승철;정승용;이재호;구자윤
    • 전기학회논문지
    • /
    • 제57권2호
    • /
    • pp.252-255
    • /
    • 2008
  • A study for discharge pattern analysis partial and fault location by use of UHF sensors in GIS. However, in the latter case, the results considered the velocity of EM waves modified by the waveguide characteristics of GIS bus bar were not reported yet. In this paper, UHF wide band sensor to detect partial discharge signals have been designed and manufactured to get the widest band characteristic by an application of Fat-Dipole UHF antenna and the result that the transmission velocity of EM waves is 2/3 of the light have been got through the consideration of waveguide characteristics. Also, to verify applicability on site of the developed method, self-designed external type UHF sensor have been installed on operating GIS in Korea Midland Power co. and detected location of the fault. Through the fault have been found at the location, the reliability of the developed method have been proved.

보정계수 산출에 의한 신광원용 표준램프 광속의 검증 (The verification of Luminous flux of Reference illuminant for New light source by the calculated correction factor)

  • 황명근;신상욱;이진우
    • 전기학회논문지
    • /
    • 제58권2호
    • /
    • pp.369-372
    • /
    • 2009
  • When measuring the luminous flux of a light source at the integrating sphere photometer, it can know the luminous flux to compare the standard lamp with the specimen lamp at the same location. But in case of PLS(plasma lighting system, microwave discharged lamp), that two lamps are cannot be the same location. If the reference illuminant and specimen lamp are cannot measure identical location, we should measure the variation of the luminous flux. For the outcome we can turn out a correction factor to revise and reflect it. But the better way is calibrate the specimen lamp locate the identical location of reference illuminant measured. In this thesis, we've test to find the correction factor for consider that change the measuring location. And it turns out the correction factor. From this, it presents the result to make a select for the reference illuminant which is against the illuminant type for newly produce.

Algorithm for Detecting, Indentifying, Locating and Experience to Develop the Automate Faults Location in Radial Distribution System

  • Wattanasakpubal, Choowong;Bunyagul, Teratum
    • Journal of Electrical Engineering and Technology
    • /
    • 제5권1호
    • /
    • pp.36-44
    • /
    • 2010
  • This paper presents the design of an algorithm to detect, identify, and locate faults in radial distribution feeders of Provincial Electricity Authority (PEA). The algorithm consists of three major steps. First, the adaptive algorithm is applied to track/estimate the system electrical parameter, i.e. current phasor, voltage phasor, and impedance. Next process, the impedance rule base is used to detect and identify the type of fault. Finally, the current compensation technique and a geographic information system (GIS) are applied to evaluate a possible fault location. The paper also shows the results from field tests of the automate fault location and illustrates the effectiveness of the proposed fault location scheme.

Goseki Grade and Tumour Location Influence Survival of Patients with Gastric Cancer

  • Calik, Muhammet;Calik, Ilknur;Demirci, Elif;Altun, Eren;Gundogdu, Betul;Sipal, Sare;Gundogdu, Cemal
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제15권3호
    • /
    • pp.1429-1434
    • /
    • 2014
  • Background: Owing to the variability of histopathological features and biological behaviour in gastric carcinoma, a great number of categorisation methods such as classical histopathologic grading, Lauren classification, the TNM staging system and the newly presented Goseki grading method are used by pathologists and other scientists. In our study, we aimed to investigate whether Goseki grade and tumour location have an effects on survival of gastric cancer cases. Materials and Methods: Eighty-four patients with gastric adenocarcinoma were covered in the investigation. The importance of Goseki grading system and tumour location were analysed in addition to the TNM staging and other conventional prognostic parameters. Results: The median survival time in our patients was 35 months (minimum: 5, maximum: 116). According to our findings, there was no relation between survival and tumour size (p=0.192) or classical histological type (p=0.270). In contrast, the Goseki grade and tumour location significantly correlated with survival (p=0.007 and p<0.001, respectively). Additionally, tumours of the intestinal type had a longer median survival time (60.0 months) than diffuse tumours (24.0 months). Conclusions: In addition to the TNM staging system, tumour location and the Goseki grading system may be used as significant prognostic parameters in patients with gastric cancer.

런던지역 한인 이주민의 정착경로 및 주거입지 특성 (Characteristics of the Immigration Path and Residential Location of Korean Immigrants in London Metropolitan Area)

  • 박원석
    • 한국경제지리학회지
    • /
    • 제18권4호
    • /
    • pp.467-491
    • /
    • 2015
  • 본 연구는 런던지역의 한인 이주민을 대상으로 정착경로, 주거입지 및 주택소유 구조의 특성을 분석하는 것을 목적으로 한다. 분석결과를 요약하면 다음과 같다. 첫째로, 한인 이주민의 최초 주거입지 결정요인으로는 최초 이주시의 이주 상태, 이주지역 그리고 현지인 도움 여부인 것으로 나타난다. 둘째로, 이주민의 현재 주거입지 결정요인으로는 소득수준, 영어 구사능력, 영국 교육 경험, 최초 거주지인 것으로 나타난다. 셋째로, 이주민의 주택 소유구조 특성을 보면, 이주민들은 이주기간이 10년을 지나고, 소득수준이 5만 파운드를 넘어서면서 자가주택에 거주하는 경향을 보인다. 넷째로, 이를 토대로 이주민들의 정착경로를 유형화하면, 이주초기부터 한인타운에 정착하는 민족공동체 지향 유형과 이주 초기부터 백인 주류층 거주지에 정착하는 백인주류층 지향 유형이 대표적이다. 따라서 런던지역 한인타운은 현재는 규모나 역할이 제한적이지만, 한인사회의 역량이 커짐에 따라 발전 가능성도 충분하다고 판단된다.

  • PDF

A Crew Location Recognition System for a Naval Ship by Applying Ubiquitous Technologies

  • Lee, Jin-Tae;Cho, Seong-Rak;Kim, Seong-Jeon
    • Journal of Ship and Ocean Technology
    • /
    • 제12권3호
    • /
    • pp.26-35
    • /
    • 2008
  • Recognition of real time locations of crews for a naval ship is important, not only for the operation efficiency but also for the safety of onboard crews in the ship. More than 100 crews are dwelling in a modem naval ship and they are involved in various duties. Moreover many visitors come in and out frequently while the ship is moored in a harbor. It sometimes requires considerable time and efforts to find a person for urgent mission. It would enhance the operational efficiency if locations of onboard crews are recognized and monitored in real time. An active type RFID tag, which has a specific ID number, is distributed to each crew member, which should be carried during his stay in the ship. A number of fixed type RFID readers are to be located at the major passages of the ship, which are connected to the main computer via Local Area Network. The location of a crew would be identified by the ID number of his RFID tag and the location of the RFID reader which detected the RFID tag. A middleware is needed to process the collected data in the main computer. The data is fed to application softwares, which actually display locations of the concerned crews. The software is coded using GUI (Graphic User Interface) for better user friendliness, which has the function of storing the location history of a crew, and sending warning messages to appropriate persons, if unallowable behavior is detected. An auxiliary naval ship is selected for an experimental application study of the proposed system. It turns out that the required budget and time for the realization of the system is within the allowable limits. But complementary measures to protect the privacy of onboard crews should be considered and adopted, before the application of the system is realized.

IP-RFID를 이용한 실시간 항만물류 위치 추적 시스템 (Real-Time Port Logistics Location Tracking System using IP-RFID)

  • 박병권;박민선
    • 한국정보통신학회논문지
    • /
    • 제22권11호
    • /
    • pp.1531-1537
    • /
    • 2018
  • 해운 물류에서 대량의 컨테이너는 선박, 트럭, 철도 등 복합 운송의 형태로 항만을 거쳐 목적지로 이동된다. 선사, 화주와 같은 물류 주체는 화물의 주요 물류 거점에 대한 실시간 반 출입 정보를 필요로 한다. 특히 항만은 해운과 내륙을 연결하는 중요한 공간으로써 물류 주체의 관심이 높다. 본 논문에서는 GPS를 이용한 위치 추적을 점 단위가 아닌 면 단위를 기반으로 동적으로 나타낸다. 즉 어느 항만의 영역 안으로 들어가는지, 나가는지, 또는 통과하는지와 같은 동적인 위치 추적을 나타내고 있다. 이전 연구의 위치 추적 알고리즘을 기반으로 능동형(Active) IP-RFID 기술을 활용한 항만 진출입, 항만 내부에서의 실시간 위치 추적 알고리즘을 제안한다.

Analysis of Radiation Exposure Dose according to Location Change during Radiation Irradiation

  • Chang-Ho Cho;Jeong-Lae Kim
    • International Journal of Advanced Culture Technology
    • /
    • 제12권2호
    • /
    • pp.368-374
    • /
    • 2024
  • During an X-ray examination, the beam of radiation is dispersed in many directions. We believe that managing radiation dose is about providing transparency to users and patients in the accurate investigation and analysis of radiation dose. The purpose of measuring the radiation dose as a function of location is to ensure that medical personnel using the equipment or participating in the operating room are minimally harmed by the different radiation doses depending on their location. Four mobile diagnostic X-ray units were used to analyze the radiation dose depending on the spatial location. The image intensifier and the flat panel detector type that receives the image analyzed the dose by angle to measure the distribution of the exposure dose by location. The radiation equipment used was composed of four units, and measuring devices were installed according to the location. The X-ray (C-arm) was measured by varying the position from 0 to 360 degrees, and the highest dose was measured at the center position based on the abdominal position, and the highest dose was measured at the 90° position for the head position when using the image intensifier equipment. The operator or medical staff can see that the radiation dose varies depending on the position of the diagnostic radiation generator. In the image intensifier and flat panel detector type that accepts images, the dose by angle was analyzed for the distribution of exposed dose by position, and the measurement method should be changed according to the provision of dose information that is different from the dose output from the equipment according to the position.

전방 십자인대 파열과 동반된 반월상 연골 파열 양상 - 파열부위 및 형태의 분석 - (Appearance of Meniscus Tear Associated with ACL Rupture - Analysis of Location and Type of Meniscus Tear -)

  • 이영현;남일현;문기혁;윤호현;김재철;안길영
    • 대한정형외과스포츠의학회지
    • /
    • 제6권1호
    • /
    • pp.45-49
    • /
    • 2007
  • 목적: 전방 십자 인대 파열 시 동반되는 반월상 연골 파열에서 반월상 연골의 파열 부위 및 파열 형태 등을 분석하여 반월상 연골 파열이 봉합 가능한 부위인지를 예측하고 준비하고자 함이다. 대상 및 방법: 전방 십자 인대 파열로 전방 십자 인대 재건술을 시행 받은 환자 78예를 대상으로 하였다. 파열의 기준은 수상일로부터 12개월 이내에 수술한 경우로 하였으며 반월상 연골 파열 부위 및 형태를 술 전 시행한 자기 공명 영상 소견 및 전방 십자 인대 재건술시 시행한 관절경 소견을 종합하여 분류 하였다. 결과: 전방 십자 인대 파열이 있은 78예 중 50예 (64%)에서 반월상 연골 파열이 동반되었으며 외측 반월상 연골파열이 32예, 내측 반월상 연골 파열이 24예 이었고, 그 중 6예 에서는 양측 반월상 연골 파열이 동시에 있었다. 파열의 형태는 종주 파열이 30예 (53%)로 가장 많았고, 파열의 부위는 방사상 구역(radial zone)에 의하면 후각부 파열이 35예 (62%)이었고 환상 구역 (circumferential zone)에 의하면 red-red 구역이 22예 (39%)로 가장 많았다. 결론: 전방 십자 인대 파열과 동반된 반월상 연골 파열이 있는 경우 반월상 연골의 종주 파열이 가장 많았으며 이 들은 주로 관절경적 반월상 연골 봉합술로 치유될 가능성이 있는 부위의 파열이었다.

  • PDF

무선 ATM 망에서 이동성 지원을 위한 위치 등록기의 논리적 계층 구조 (A Logical Hierarchy Architecture of Location Registers for Supporting Mobility in Wireless ATM Networks)

  • 김도현;조유제
    • 한국통신학회논문지
    • /
    • 제28권6A호
    • /
    • pp.361-370
    • /
    • 2003
  • 본 논문에서는 PNNI(Private Network to Network Interface) 기반의 무선 ATM 망에서 단말의 이동성을 보장하기 위해 기존의 위치 등록기 구조를 개선하고자 한다. 기존의 위치 등록기 구조는 위치 등록기를 물리적 계층으로 배치함으로 인해 다수의 데이터베이스가 요구되고, 데이터베이스 액세스 회수와 신호 트래픽 및 호 설정 지연 등이 증가하는 문제점을 갖고 있었다. 이 문제점을 보완하기 위해 본 논문에서는 논리적 계층 형태로 이루어진 위치 등록기 구조를 제시하고자 한다. 제안된 논리적 계층 구조에서는 위치 등록기를 논리적인 그룹으로 묶고, 이 그룹들을 다시 그룹으로 묶어서 위치 등록기의 논리적인 트리 형태로 만들어 상위 레벨의 위치 등록기의 역할을 하위 레벨의 위치 등록기 중 하나가 수행하도록 하고 있다. 기존의 위치 등록기 구조와 성능을 비교한 결과에서 제안된 논리적 계층 구조는 데이터베이스 수와 위치 관리비용 측면에서 우수한 성능을 보여주고 있다.