• 한국전자통신학회논문지
• /
• 제6권3호
• /
• pp.433-438
• /
• 2011

본 논문에서는 이동통신망을 이용한 WiFi 위치 측위기술 및 서비스에 대해 소개해 보고자 한다. 또한, 본 논문에서는 이동통신망을 이용한 WPS(WiFi Positioning System)의 기본적인 기술요소 및 품질요소 등을 살펴보고자 한다. 위 이동통신 기반의 위치서비스를 제공할 때 단말의 위치 결정 기술을 통하여 사용자 또는 가입자에게 편리성을 제공해 줄 뿐만 아니라 위치기반서비스 산업활동에 대하여 많은 기여를 할 것으로 본다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.171-173
• /
• 2003

This paper presents a new fault location algorithm for 3 phase underground cable based on distributed parameter circuit analysis, by which we establish the basic equations for each of core and sheath currents and voltages considering cross-bonding sheaths. The proposed algorithm need simulate by EMTP, and then the EMTP data need be compared with the calculation result in Matlab.

• 한국정보기술학회 영문논문지
• /
• 제8권2호
• /
• pp.27-39
• /
• 2018

In this paper, we describe the algorithms, EEG classification methods, and position data analysis methods using EEG and ADS1299 sensors. In addition, it is necessary to manage the amount of real-time data of location data and EEG data and to extract data efficiently. To do this, we explain the process of extracting important information from a vast amount of data through a cloud server. The electrical signals extracted from the brain are measured to determine the psychological state and health status, and the measured positions can be collected using the position sensor and triangulation method.

• 한국응용과학기술학회지
• /
• 제36권2호
• /
• pp.507-523
• /
• 2019

본 연구는 유도체육관 운영 및 이용에 영향을 미치는 입지와 서비스 요인을 분석하는데 목적이 있으며, 원활한 유도체육관 운영을 위하여 수련생의 만족에 영향을 미칠 수 있는 요인에 대해 가이드(guide)가 될 수 있는 실증적 자료를 제시하는데 의의가 있다. 이를 위해 총 350부의 설문지를 배포하여 불성실하게 응답된 11부를 제외하고 총 339부를 유효표본으로 사용하였다. 분석을 위해 IBM SPSS 21을 이용하여 빈도분석, 탐색적 요인분석, Cronbach's ${\alpha}$, 상관관계분석, 다중회귀분석을 실시하였다. 분석을 통한 결과는 다음과 같다. 우선 유도체육관 운영 및 이용에 영향을 미치는 입지와 서비스 요인이 수련생의 만족도에 미치는 영향에 대해서 운영, 지도자, 커뮤니케이션, 수련생가치, 시설, 입지 요인 순으로 모두 수련생 만족에 유의한 영향을 미치는 것으로 나타났다. 하위요인별로 살펴보면, 첫째, 운영 요인에서 상해보험 가입 여부, 체육관 자유로운 이용, 운동 프로그램 운영 요인 순으로 수련생 만족도에 유의한 영향을 미치는 것으로 나타났으며, 둘째, 지도자 요인에서는 지도자 신뢰도 요인이 영향을 미쳤고, 셋째 커뮤니케이션 요인에서는 회원 간 의사소통 요인이 영향을 미치는 것으로 나타났다. 그리고 넷째, 수련생가치 요인에서는 건전한 여가활동과 운동수행능력 향상 요인 순으로 영향을 미쳤고, 다섯째, 시설 요인에서는 부대시설 수준과 주요시설 수준 요인 순으로 영향을 미치는 것으로 나타났으며, 여섯째, 입지 요인에서는 체육관의 가시성 여부 요인만이 영향을 미치는 것으로 나타났다. 유도체육관 입지 형태(역세권, 주거지역, 상업지역)에 따른 체육관 특성의 차이에 대해서는 우선 역세권에 위치한 체육관은 수련생가치, 입지, 커뮤니케이션, 시설이 수련생 만족에 유의한 영향을 미치는 것으로 나타났으며, 주거지역에 위치한 체육관은 운영, 수련생가치, 커뮤니케이션, 시설이 수련생 만족에 유의한 영향을 미치는 것으로 나타났고, 상업지역에 위치한 체육관은 운영, 입지, 커뮤니케이션, 시설이 수련생 만족에 유의한 영향을 미치는 것으로 나타났다.

• Journal of Electrical Engineering and Technology
• /
• 제1권2호
• /
• pp.170-176
• /
• 2006

This paper proposes a topological locating algorithm to determine the location of the power quality event source. This algorithm makes use of the information on the topology of the monitored network and on the direction of PQ events. As a result, the bus incidence matrix is modified using monitor location and the direction matrix is constructed. With this information, the algorithm determines the suspected locations of the PQ events. To reduce suspicious areas, it utilizes event cause and related equipment. In case of line fault event, it calculates the distance from the monitor to the location of event source. The overall algorithm is applied to the IEEE test feeder and accurately identifies the event source location.

• 소성∙가공
• /
• 제12권2호
• /
• pp.134-140
• /
• 2003

Polymers such as polypropylene or polyethylene offer a unique feature of producing an integral hinge, which can flex over a million times without causing a failure. With such advantage manufacturing, time and cost required at the assembly stage can be eliminated by injecting the whole part as one piece. However, due to increased fluidity resistance at hinges during molding, several defects such as short shot or premature hinge failure can occur with the improper selection of gate locations. Therefore, it is necessary to optimize flow balancer in injection molding of part with hinges before actually producing molds. In this paper, resin flow patterns depending on several gate positions were investigated by numerical analyses of a simple strip part with a hinge. As a result, we found that the properly determined gate location leads to better resin flow and shorter hesitation time. Finally, injection molding tryouts using a mold that was designed one of the proposed gate systems were conducted using polypropylene that contained 20% talc. The experiment showed that hinges without defects could be produced by using the designed gate location.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제9권1호
• /
• pp.81-90
• /
• 2002

The least informative (favorable) distributions, minimizing Fisher information for a multivariate location parameter, are derived in the parametric class of the exponential-power spherically symmetric distributions under the following characterizing restrictions; (i) a bounded variance, (ii) a bounded value of a density at the center of symmetry, and (iii) the intersection of these restrictions. In the first two cases, (i) and (ii) respectively, the least informative distributions are the Gaussian and Laplace, respectively. In the latter case (iii) the optimal solution has three branches, with relatively small variances it is the Gaussian, them with intermediate variances. The corresponding robust minimax M-estimators of location are given by the $L_2$-norm, the $L_1$-norm and the $L_{p}$ -norm methods. The properties of the proposed estimators and their adaptive versions ar studied in asymptotics and on finite samples by Monte Carlo.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권4호
• /
• pp.472-484
• /
• 2002

To analyze the characteristics of air flow and $CO_2$ extinguishant transfer when extinguishant is injected into a closed space similar to marine engine room, a numerical simulation on a space was performed. Flow fields and $CO_2$ concentration fields are calculated according with the variation of the location & injection angle of nozzles. The results of simulation showed that the pattern of recirculation flow was affected greatly with the location & injection angle of nozzles and such a recirculation flow accelerated mass transfer of $CO_2$ and greatly affected the diffusion process of $CO_2$ extinguishant. It is considered that this result of this study can be useful to designing the arrangement of nozzles for the $CO_2$ fire fighting equipments in a marine engine room.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.317-320
• /
• 2005

The LBS (Location-Based Services) are valuable information services combined the location of moving object with various contents such as map, POI (point of Interest), route and so on. The must general service of LBS is route determination service and its applicable parts are FMS (Fleet Management System), travel advisory system and mobile navigation system. The core function of route determination service is determination of optimal route from source to destination in various environments. The MODB (Moving Object Database) system, core part of LBS composition systems, is able to manage current or past location information of moving object and massive trajectory information stored in MODB is value-added data in CRM, ERP and data mining part. Also this past trajectory information can be helpful to determine optimal route. In this paper, we suggest methods to determine optimal route by querying past trajectory information in MODB system and verify the effectiveness of suggested method.

• Journal of information and communication convergence engineering
• /
• 제6권1호
• /
• pp.110-116
• /
• 2008

A RFID is an automatic data collection system based on the radio frequency and is the key technology of ubiquitous computing environments. Since the locations of objects attached by RFID tags can be acquired by readers, it is possible to query the locations of tags. To query tags efficiently, the data of RFID tags should be modeled and indexed. However, since the location information of tags, the predicates of queries, are differ from coordinates of moving objects, it is difficult to model tags under the concept of moving objects, In this paper, we propose the location model of tags to represents the trajectories of tags. The location model is composed of the set and graph based approaches.