• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.214-220
• /
• 2003

Pipe jacking is a name for a method to excavate a tunnel by pushing pipe into the ground from an especial pit. Size of tunnels in this method is different from under 900mm (microtunneling) to more than 3,000mm. Method of excavation is also different from hand digging to use of any kind of tunnel boring machines such as slurry and earth pressure balance (EPB) machines. Slurry pipe jacking was firmly established as a special method for the nondisruptive construction of the underground tunnels in urban area. During the pipe jacking and microtunneling process, the jacking load is an important parameter, controlling the pipe wall thickness, need to and location of intermediate jacking station, selection of jacking frame and lubrication requirements. The main component of the jacking load is due to frictional resistance. In this paper the skin friction between pipe surface and surrounding condition also lubricant quality based on a few fundamental tests, were considered. During this study unconfined compressive strength test, dynamic friction measurement test and direct shear box test were raised for one of the largest diameter slurry pipe jacking project in Fujisawa city in Japan. It could be concluded that in slurry pipe jacking, prediction of frictional forces are mainly dependent on successful lubrication, its quality and lubricant strength parameters. Conclusions from this study can be used for the same experiences.

• Journal of the Korean Home Economics Association
• /
• v.41 no.11
• /
• pp.11-20
• /
• 2003

The purpose of this study is : first, to examine factors of fashion show planning and production and to classify types of fashion show planning and production: second, to compare and analyze the factors through a case analysis to defined their differences. For the purpose, data are collected to compare and analyze from literature as well as the interview with fashion show planning and production companies in Korea. The result shows that all the factors are considered on a practical level except security and publicity among 15 factors presented in literature : the purpose of the show, target spectators, product selection, product prices, type of show, size, location, models, time of show, duration, theme, security, budget, and publicity. Show types are divided into national brands, designer brands, imported brands, and collections. The result of the comparison and analysis of the factors of the planning and production by type shows that factors vary greatly depending on the purpose of the show, target spectators, and form of the show and products. By analyzing the case study on fashion show planning and production on a practical level, the study recognizing the need of specialized development of fashion show planning in Korea's fashion industry, is a basic process of theory systematization for the planning and production in its marketing aspects, and will provide relevant theories in such aspects for those who want to enter into the field.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.6
• /
• pp.515-518
• /
• 2008

Organic light emitting diode(OLED) is one of the most promising type of future flat panel display. A linear source is used to deposite organic vapor to a large size OLED substrate. An electric heater which is attached on the side of linear source heats the organic powder for the sublimation. The nozzle of heater, which is attached at the top of the linear source has an optimal temperature. An numerical analysis has been performed to find optimal heater position for the optimal nozzle temperature. A commercial CFD program, FLUENT, is used on the analysis. Two-dimensional and three-dimensional analysis have been performed. The analysis showed that the heater should be attached at the outer side of crucible wall rather than inner side of housing, which was original design. Eighteen milimeter from the top of the linear source was suggested as the optimal position of heater. Improving thermal performance of linear source not only helps the uniformity of organic vapor deposition on the substrate but also increase productibity of vapor deposition process.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.6
• /
• pp.47-56
• /
• 2018

This study aims to reconsider public architecture as effective resources for the local regeneration and draws a couple of issues based on analysis of planning status and cases from the perspectives of local regeneration. Through the analysis, this study suggests following as ways of improvement of public architecture planning: first, in order to secure systematic management of local regeneration, it is necessary to build up a dedicated organization or collaboration system that organically links and manages public facilities. Also related criteria that include the feasibility study, preliminary examination system, conduct review of investment and review standards need to be supplemented. Second, it is necessary to establish an integrated plan including the periphery of public architecture in the aspect of integrated urban planning, and to set up a selection of location standard that supports public architecture be a local center. Lastly, to activate local communities, the study proposes diversification of ways of combining programs and a process for participation and operating funds.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.4
• /
• pp.1409-1425
• /
• 2021

In wide-ranging information society, fast and easy access to information in language of one's choice is indispensable, which may be provided by using various multilingual Natural Language Processing (NLP) applications. Natural language text contains references among different language elements, called anaphoric links. Resolving anaphoric links is a key problem in NLP. Anaphora resolution is an essential part of NLP applications. Anaphoric links need to be properly interpreted for clear understanding of natural languages. For this purpose, a mechanism is desirable for the identification and resolution of these naturally occurring anaphoric links. In this paper, a framework based on Hobbs syntactic approach and a system developed by Lappin & Leass is proposed for resolution of reflexive anaphoric links, present in Urdu text documents. Generally, anaphora resolution process takes three main steps: identification of the anaphor, location of the candidate antecedent(s) and selection of the appropriate antecedent. The proposed framework is based on exploring the syntactic structure of reflexive anaphors to find out various features for constructing heuristic rules to develop an algorithm for resolving these anaphoric references. System takes Urdu text containing reflexive anaphors as input, and outputs Urdu text with resolved reflexive anaphoric links. Despite having scarcity of Urdu resources, our results are encouraging. The proposed framework can be utilized in multilingual NLP (m-NLP) applications.

• Journal of the Korea Safety Management & Science
• /
• v.25 no.4
• /
• pp.87-94
• /
• 2023

This study analyzed and identified various causes of caustic alarms of 163 fire detectors that occurred from January 2019 to December 2021 at domestic semiconductor manufacturing plants equipped with about 30,000 fire detectors, and proposed a new non-fire prevention cause investigation plan by applying the NFPA 921 scientific methodology. The results of the study are as follows. First, in terms of necessary recognition and problem definition, an analog detector and an integrated monitoring system were proposed to quickly determine the location and installation space information of the fire detector. Second, in order to prevent speculative causes and errors in various analyses in terms of data analysis and hypothesis establishment, non-fire reports were classified into five by factor and defined, and the causes of occurrence by factor were classified and proposed. Finally, in terms of hypothesis verification and final hypothesis selection, a non-fire prevention improvement termination process and a final hypothesis verification sheet were proposed to prevent the cause from causing re-error.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.2
• /
• pp.233-247
• /
• 2016

Local food industry has been spreading all over the world. Korea is also actively applying and developing local food industry. However, relatively high distribution cost in Korean agricultural market is hindering its further growth. Distribution cost has close relation with shipping distance. Raised distribution cost brings major impacts not only on quality and price of products but also on greenhouse gas(carbon dioxide) emissions. Therefore, it is necessary to find a solution for inefficient distribution system of the local food industry to reduce overall cost and greenhouse gas. In this study, we present a location selection model for local food regional center using Analytic Hierarchy Process. The location of local food regional hub center is decided based on expert opinions on five factors: accessibility, quality, population, size of area, and shipping distance. The relative importance of the five factors has been concluded as follows: quality (0.430) ${\gg}$ population (0.262) ${\gg}$ travel distance (0.201) ${\gg}$ accessibility (0.075) ${\gg}$ and area (0.033). We apply and analyze the environmental management system model for Local food industry to develop the regional hub center site selection criteria and to analyze the effects of greenhouse gas emissions in the local food industry. This study, by applying and analyzing the environmental management system of the local food industry, is believed to be a valuable asset for managing greenhouse gas emission in the local food industry. Also, the data will be used for the autonomous local food industry's direct sales stall management. Eventually, this study will contribute so greatly to the local food industry's competitiveness that even large distribution companies will give way for the local food industry.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11B
• /
• pp.960-968
• /
• 2006

HMIPv6 improved the handover management of basic MIPv6 by introducing the new protocol agent MAP. In this new protocol, MAP instead of the Mobile Node intercepts all packets and redirects the packets to CoA of the Mobile Node. However, this process may degrade the network performance due to the centralization phenomenon of registration occurring in the hierarchical MAP structure. ffe propose two schemes to improve real time traffic performance. First proposal is a MAP selection mettled in which MAP is selected based on traffic characteristics. And we also propose differentiated traffic processing scheme with multi-level queues when Home Agent or Correspondent Nodes process Binding Update messages. Performances of the proposed scheme are analyzed. Analysis result shows that our model has good performance in the respect of location update cost and total cost of Mobile Nodes.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.61-67
• /
• 2016

Opportunistic incremental relaying (OIR) system effectively overcomes the degradations caused by the fading of the wireless channel, and efficiently utilizes the wireless resources. Most of the OIR studies, however, assume spatially fixed relays. The user terminals which are usually served as relays move continuously, the assumption that the relays are fixed is not realistic. In this paper, the location of the spatially random user terminals are modeled by the Poisson point process, and the performance of an OIR system is derived. We noticed that the performance of the OIR system improves with the spatially random relays as well as with the fixed relays. Also the intensity of the relays and the transmitting directions toward the destination affect the performances. The performances of the maximal ratio combining (MRC) and the selection combining (SC) at the destination are compared.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.244-244
• /
• 2015

Managed Aquifer Recharge (MAR) in the form of Aquifer Storage and Recovery (ASR) systems are being applied for numerous water augmentation projects both in developed and developing countries. Given the onset of Climate Change and its influence on weather patterns and land use, it has been acknowledged the utilization of this technology will be ever increasing. This technique like all others does have its drawbacks or disadvantages, whereby to overcome these drawbacks or disadvantages it is recommended that logical planning process be followed. In this study, we developed a decision framework known as "Decision framework for the planning, designing, construction/testing and implementation of subsurface water storage system" to further standardize the planning and design process of subsurface water storage system to increase the probability of having a successful ASR/ASTR project. The formulation of this framework was based on earlier frameworks, guidelines, published papers and technical reports which were compiled into a data collection database. The database of which consider both qualitative and quantitative aspect for example recharge objectives, site location, water chemistry of the native, source and recovered water, aquifer characteristics(hydraulic conductivity, transmissivity, porosity), injection/pumping rate, ecological constraints, societal restrictions, regulatory restrictions etc. The assimilation of these factors into a singular framework will benefit the broad spectrum of stakeholder as it maps the chronological order under which ASR project should be undertaken highlighting at each stage the feasibility of the project. The final stage of which should result in fully operational ASR system. The framework was applied to two case studies and through the application of a modified ASR site selection suitability index (Brown et al., 2005) a score was derived to identify the performance of each site. A high score of which meant a maximize chance of success given the reduce presence of project constraints.