• 제목/요약/키워드: Location Selection Process

검색결과 135건 처리시간 0.026초

GIS와 GOSST를 이용한 물류센터의 입지선정에 관한 연구 (The Study of Selecting of Logistics Distribution Center Using GIS and GOSST)

  • 오성록;김연진;차주일;이홍철
    • Journal of Information Technology Applications and Management
    • /
    • 제18권4호
    • /
    • pp.81-93
    • /
    • 2011
  • By using GOSST theory, this paper models SSCFLP taking FLP, capacity of the facilities, single source capacitated limitation level and service enhancement issues into consideration. GOSST theory is strongly suggested as the solution procedure for these issues. We have used clustering of Center of Gravity method using the case study of the company S and then, took a heuristic GOSST measure in the alternative selection process. As a result, the research finds an alternative solution that both meets the satisfactory level of service and achieves consistent distribution capacity. When using this modeling, especially, to select the location of the logistics distribution center, the efficiency of current facilities is maximized while offering the minimum geometric distance for the alternative. Also, we can expect that the illustrated model and alternative solution can be applied to architecture of distribution system, to selection of telecommunication system locations for wireless network and to relocation of related facilities due to their sensitivities to location and weight.

농촌마을계획 지원을 위한 통합계획모의모형의 개발 (Development of Integrated Planning Simulation Model for Supporting Rural Village Planning)

  • 김대식;정하우
    • 농촌계획
    • /
    • 제9권4호
    • /
    • pp.43-51
    • /
    • 2003
  • This study aims to integrate the simulation models for rural settlement planning (SimRusep) in the district level (Myon) area of rural counties. The SimRusep, which has two modules of key villages selection and spatial planning for the selected villages, consists of four sub-models such as the spatial location-allocation model of center villages (SLAMCV), the potential centrality evaluation model (PCEM), the land use planning model (LUPM), and the 3-dimensional spatial planning modeller (3DSPLAM). Basically, map data of the integrated system which can be operated on the UNIX environment is inputted and treated using GIS (ARC/INFO) and then its village planning results is graphically presented on the AutoCAD. In order to verify the practical applicabilities of the SimRusep, an administrative area, Ucheon-myun, HoengSung-gun, KangWon-do, was selected as a case study area. It was well operated in the strategic application trials considering application of each sub-model in the study area. The operation results of the SimRusep showed the possibilities of realtime simulation from the selection of key village to its final stereoscopic presentation of planned results. Alternative village plan proposals can be swiftly drafted, which means very practical support for decision making process and public participation.

한국 제지산업의 입지 변동 (Locational Shifts in the Korean Paper Industry)

  • 조인혜;장영진
    • 한국경제지리학회지
    • /
    • 제22권4호
    • /
    • pp.472-487
    • /
    • 2019
  • 제지산업은 거듭되는 원료 및 공정기술의 혁신과 함께 두드러진 입지변동을 겪은 산업으로서 국가 및 지역별 생산 조건의 차이로 인해 해당 산업의 구조 및 입지가 상이하게 전개되고 있어 국가 및 지역별 사례 연구는 큰 의의를 갖는다고 하겠다. 본 연구는 국내 제지산업의 발달과정에서 나타나는 입지 변동에 주목하고 이를 생산요소 조건과 시장 및 정부 정책을 중심으로 설명하였다. 먼저, 20세기 초반부터 오늘에 이르기까지 국내 펄프·제지산업은 생산요소 조건, 특히 원료 조건의 변화와 관련하여 펄프공정 중심에서 제지공정 중심으로 산업의 구조가 변화되었음을 고찰하였다. 둘째, 오늘날 제지산업계에서는 원료와 시장을 입지선정과 관련하여 어떻게 고려하고 있는지 파악하였다. 마지막으로, 1970년대 말부터 수도권에 대한 입지규제가 시행됨에 따라 제지산업의 입지 변동이 어떻게 진행되었는지 설명하였다.

An Economic Design of the Integrated Process Control Procedure with Repeated Adjustments and EWMA Monitoring

  • Park Changsoon;Jeong Yoonjoon
    • 한국통계학회:학술대회논문집
    • /
    • 한국통계학회 2004년도 학술발표논문집
    • /
    • pp.179-184
    • /
    • 2004
  • Statistical process control (SPC) and engineering process control (EPC) are based on different strategies for process quality improvement. SPC reduces process variability by detecting and eliminating special causes of process variation, while EPC reduces process variability by adjusting compensatory variables to keep the quality variable close to target. Recently there has been need for an integrated process control (IPC) procedure which combines the two strategies. This article considers a scheme that simultaneously applies SPC and EPC techniques to reduce the variation of a process. The process disturbance model under consideration is an IMA(1,1) model with a location shift. The EPC part of the scheme adjusts the process, while the SPC part of the scheme detects the occurrence of a special cause. For adjusting the process repeated adjustment is applied by compensating the predicted deviation from target. For detecting special causes the two kinds of exponentially weighted moving average (EWMA) control chart are applied to the observed deviations: One for detecting location shift and the other for detecting increment of variability. It was assumed that the adjustment of the process under the presence of a special cause may change any of the process parameters as well as the system gain. The effectiveness of the IPC scheme is evaluated in the context of the average cost per unit time (ACU) during the operation of the scheme. One major objective of this article is to investigate the effects of the process parameters to the ACU. Another major objective is to give a practical guide for the efficient selection of the parameters of the two EWMA control charts.

  • PDF

조선후기 왕릉 부석처(浮石處)의 선정 과정과 부석처 조계동 (A Study on the Selection Process of Quarry and the Quarry Jogyedong in Royal Tombs in the Late Joseon Period)

  • 이상명
    • 건축역사연구
    • /
    • 제26권3호
    • /
    • pp.51-62
    • /
    • 2017
  • The purpose of this study was to comprehend the selection process of quarry and the quarry Jogyedong through the Salleung-uigwes in royal tombs constructions in the late Joseon period. Especially, it is to comprehend about the effect by difference of use of stone between Daebuseokso and Sobuseokso. Following conclusions have been reached through the study. First, the quarry of Daebuseokso had been selected very carefully through the quality check process. Second, the quarry of royal tombs around the capital was located at Mt. Bulam in the east and Mt. Bukhan in the west. This is because the nature of the procurement of stone, which is important for transportation, is that it is necessary to prepare the mountains close to the royal tombs. Third, the locations of quarry of between Daebuseokso and Sobuseokso were differently selected. The quarry of Daebuseokso was located at a distance of three times distant from Sobuseokso. Forth, the epigraph related to quarry is located in Sareung construction in the valley of Jogyedong. This is a very important data to confirm the location of royal tombs construction.

Effect of Braid Structure on Yarn Cross-Sectional Shape

  • Lyons, Jason;Pastore, Christopher M.
    • Fibers and Polymers
    • /
    • 제5권3호
    • /
    • pp.182-186
    • /
    • 2004
  • The effect of braid construction parameters on yarn cross-sectional shape is presented in this paper. The location of the yam within the braid unit cell is quantified by a compaction factor. A range of braided fabrics were produced and optically measured for actual yarn cross-sectional shape. A comparison of the theoretical and experimental values shows good correlation. Design curves can be produced with the developed model to allow selection of appropriate braid process parameter to create yarns with desired cross-sectional geometries.

물류관리 시스템 선정을 위한 다기준 의사결정 (The Selection of a Material Handling Systems using Multi-Attribute Decision Making)

  • 정상윤;하승철;황문영
    • 산업경영시스템학회지
    • /
    • 제18권33호
    • /
    • pp.45-53
    • /
    • 1995
  • The Purpose of this paper is to describe and demonstrate a quantitative procedure for evaluating alternative material handling systems that are being considered for possible purchase. The procedure considers both quantitative factors(i.e. costs) and qualitative factors(i.e. equipment productivity) that should be considered in the evaluation process. Since these factors are not always quantifiable it is necessary that the procedure be able to quantify all factors in commensurable units. This is accomplished via a modification of the Brown and Gibson model for facility site location and selection. The model was demonstrated via a case example that encompassed the derivation of performance measures for three material handling systems.

  • PDF

효율성과 형평성을 고려한 공공시설 입지분석에 관한 연구 - 금산군 문화시설을 대상으로 - (A Study on the Location Analysis of Public Service Facilities Considering Spatial Efficiency and Equity)

  • 윤정미;이신훈
    • 한국지리정보학회지
    • /
    • 제13권2호
    • /
    • pp.1-10
    • /
    • 2010
  • 본 연구는 공공재 성격을 가지고 있는 공공시설의 입지선정에 관한 연구로서, 공공시설 입지시 효율성뿐만 아니라 형평성을 고려한 입지선정 모델을 구축하고, 보다 실세계를 반영할 수 있는 공간분석방법을 사용하여 충청남도 금산군 문화시설의 최적입지를 분석하는데 목적이 있다. 연구방법으로 첫째, 입지결정인자를 선정하기 위하여 전문가 설문조사를 실시하고, 상대적 가중치를 적용하기 위해 AHP를 적용하였다. 둘째, 위성영상을 이용하여 시가화 구역을 추출함으로써, 실세계를 모델에 반영하였다. 셋째, 공공시설 입지분석을 위해 입지배분모델을 사용하였으며, 분석시 불균등한 인구분포를 모델링에 구현하였다. 이를 통하여 기존의 일반적 입지분석 기법인 그리드 분석과 네트워크 분석 두 기법을 동시에 적용하여, 보다 정확하고 실세계를 반영할 수 있는 공간분석을 하였다.

FEM Analysis of Plasticity-induced Error on Measurement of Welding Residual Stress by the Contour Method

  • Shin, Shang-Hyon
    • Journal of Mechanical Science and Technology
    • /
    • 제19권10호
    • /
    • pp.1885-1890
    • /
    • 2005
  • The contour method relies on deformations that occur when a residually stressed component is cut along a plane. The method is based on the elastic superposition principle. When plasticity is involved in the relaxation process, stress error in the resulting measurement of residual stress would be caused. During the cutting the specimen is constrained at a location along the cut so that deformations are restrained as much as possible during cutting. With proper selection of the constraining location the plasticity effect can also be minimized. Typical patterns of longitudinal welding residual stress state were taken to assess the plasticity effect along with constraining locations.