• Communications for Statistical Applications and Methods
• /
• 제16권4호
• /
• pp.615-625
• /
• 2009

본 논문에서는 영상의 에지검출을 하는데 사용되는 여러 가지 윈도우 배치(window configurations)하에서 통계학의 이표본 위치문제(two-sample location problem)에서 대표적인 Wilcoxon 검정과 T-검정에 기초한 에지검출법에 대해 논의하고자 한다. 영상의 에지검출하는데 윈도우 배치 선택은 에지검출 성능을 결정하는 중요한 요소이다. 본 논문에서 에지는 선택된 윈도우 배치 하에서 에지-높이 모수(edge-height parameter)를 사용한 에지 모형 하에서 두 근방 영역간의 유의한 차이가 있는지를 검정함으로서 결정한다. 영상 실험에서 윈도우 배치에 따른 통계적 검정에 의한 에지검출 성능은 에지 맵(edge map)을 통한 정성적인 비교와 객관적인 척도하에서 정량적인 비교 그리고 CPU 계산시간까지 고려하여 분석하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제17권1호
• /
• pp.1-6
• /
• 2016

Ensuring the secure operation of power systems has become an important and critical matter during the present time, along with the development of large, complex and load-increasing systems. Security constraints such as the thermal limits of transmission lines and bus-voltage limits must be satisfied under all of a system’s operational conditions. An alternative solution to improve the security of a power system is the employment of Flexible Alternating-Current Transmission Systems (FACTS). FACTS devices can reduce the flows of heavily loaded lines, maintain the bus voltages at desired levels, and improve the stability of a power network. The Unified Power Flow Controller (UPFC) is a versatile FACTS device that can independently or simultaneously control the active power, the reactive power and the bus voltage; however, to achieve such functionality, it is very important to determine the optimal location of the UPFC device, with the appropriate parameter setting, in the power system. In this paper, a genetic algorithm (GA) method is applied to determine the optimal location of the UPFC device in a network for the enhancement of the power-system loadability and the minimization of the active power loss in the transmission line. To verify our approach, simulations were performed on the IEEE 14 Bus, 30 Bus, and 57 Bus test systems. The proposed work was implemented in the MATLAB platform.

• 대한안전경영과학회지
• /
• 제13권1호
• /
• pp.195-202
• /
• 2011

The study interprets each of three classification models based on Bath-Tub Failure Rate (BTFR), Extreme Value Distribution (EVD) and Conjugate Bayesian Distribution (CBD). The classification model based on BTFR is analyzed by three failure patterns of decreasing, constant, or increasing which utilize systematic management strategies for reliability of time. Distribution model based on BTFR is identified using individual factors for each of three corresponding cases. First, in case of using shape parameter, the distribution based on BTFR is analyzed with a factor of component or part number. In case of using scale parameter, the distribution model based on BTFR is analyzed with a factor of time precision. Meanwhile, in case of using location parameter, the distribution model based on BTFR is analyzed with a factor of guarantee time. The classification model based on EVD is assorted into long-tailed distribution, medium-tailed distribution, and short-tailed distribution by the length of right-tail in distribution, and depended on asymptotic reliability property which signifies skewness and kurtosis of distribution curve. Furthermore, the classification model based on CBD is relied upon conjugate distribution relations between prior function, likelihood function and posterior function for dimension reduction and easy tractability under the occasion of Bayesian posterior updating.

• 한국자동차공학회논문집
• /
• 제13권6호
• /
• pp.56-62
• /
• 2005

The fatigue analysis and lifetime evaluation are very important in design procedure to assure the safety and reliability of the rubber components. Fatigue lifetime prediction methodology of the rubber component was proposed by incorporating the finite element analysis and fatigue damage parameter from fatigue test. Finite element analysis of 3D dumbbell specimen and rubber component were performed based on a hyper-elastic material model determined from material test. The Green-Lagrange strain at the critical location determined from the FEM was used for evaluating the fatigue damaged parameter of the natural rubber. Fatigue life of the rubber component are predicted by using the fatigue damage parameter at the critical location. Predicted fatigue lifes of the rubber component agreed fairly well the experimental fatigue lives.

• 대한기계학회논문집A
• /
• 제38권9호
• /
• pp.999-1004
• /
• 2014

본 연구에서는 마찰교반용접된 AA7075-T651 판재의 피로균열전파저항의 공간적 불규칙성에 미치는 초기균열위치의 영향에 대하여 고찰되었다. 본 연구의 목적은 3가지 다른 초기균열위치에 따른 피로균열전파저항의 통계적 성질을 특성화하는 것이다. 본 연구에서는 피로균열전파저항 계수를 하나의 확률과정으로 취급하였다. 본 연구를 통하여 모든 초기균열위치의 시험편에 대한 피로균열전파저항 계수는 2-파라메터 Weibull 분포에 잘 따름을 알 수 있었다. 피로균열전파저항 계수의 확률분포의 형상 파라메터는 BM-ICL 시험편이 7.50으로 가장 크게 나타났으며, WM-ICL 시험편이 2.61로 가장 낮았다. 또한 피로균열전파저항 계수의 자기상관함수는 초기균열위치 시험편에 관계없이 모두 지수함수로 평가될 수 있음을 알았다.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제28권9호
• /
• pp.649-661
• /
• 2001

기존의 경계검출 방법은 디지털 영상에서 특정한 위치의 경계 존재 유무를 평가하기 위하여, 경계 신호를 강화하고 잡음의 영향을 줄이기 위한 여러 종류의 파라미터를 사용한다. 그 중 대표적인 것은 평활화 기능으로 가우스 함수를 많이 사용한다. 그러나, 평활화 함수는 그 크기에 따라 경계의 위치에 변화를 가져오기 때문에 특징 계산 등의 후처리 연산에 많은 오류를 전파하게 된다. 본 논문에서는 이러한 경계 검출과정의 오류를 줄일 수 있는 최적의 파라미터 평가를 퍼지 경계 표현을 이용하여 제안한다. 퍼지 경계 표현은 특정한 위치에 경계의 가능성 정도를 멤버십으로 부여하는 표현 방법으로서, 경계의 위치가 불확실하거나 밝기 변화가 이상적인 경계와 다를 경우에는 그의 애매성을 퍼지 멤버십으로 표현한다. 이러한 경계의 퍼지 표현을 이용하여 기존의 경계 검출기를 사용하여 검출된 경계에 대한 존재의 모호성 및 위치의 모호성을 평가하고, 최적의 파라미터 값을 영상의 종류에 따라 자동적으로 선택할 수 있는 측정값을 제안한다.

• 산업경영시스템학회지
• /
• 제39권1호
• /
• pp.116-122
• /
• 2016

Recently, the production cycle in manufacturing process has been getting shorter and different types of product have been produced in the same process line. In this case, the control chart using coefficient of variation would be applicable to the process. The theory that random variables are located in the three times distance of the deviation from mean value is applicable to the control chart that monitor the process in the manufacturing line, when the data of process are changed by the type of normal distribution. It is possible to apply to the control chart of coefficient of variation too. ${\bar{x}}$, s estimates that taken in the coefficient of variation have just used all of the data, but the upper control limit, center line and lower control limit have been settled by the effect of abnormal values, so this control chart could be in trouble of detection ability of the assignable value. The purpose of this study was to present the robust control chart than coefficient of variation control chart in the normal process. To perform this research, the location parameter, ${\bar{x_{\alpha}}}$, $s_{\alpha}$ were used. The robust control chart was named Tim-CV control chart. The result of simulation were summarized as follows; First, P values, the probability to get away from control limit, in Trim-CV control chart were larger than CV control chart in the normal process. Second, ARL values, average run length, in Trim-CV control chart were smaller than CV control chart in the normal process. Particularly, the difference of performance of two control charts was so sure when the change of the process was getting to bigger. Therefore, the Trim-CV control chart proposed in this paper would be more efficient tool than CV control chart in small quantity batch production.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.329-331
• /
• 2005

This paper proposes a line-to-ground cable fault location method for underground distribution system. The researched cable is composed of core and sheath. And underground cabke system has been analyzed using Distributed Parameter Circuit. The effectiveness of proposed algorithm has been verified through EMTDC simulations.

• Journal of the Korean Data and Information Science Society
• /
• 제8권1호
• /
• pp.59-70
• /
• 1997

We introduce several estimators of the location and the scale parameters of the two-parameter exponential distribution, and then compare these estimators by the mean square error (MSE). Using the parametric bootstrap estimators and the delete-d jackknife, we obtain the bootstrap and the delete-d jackknife confidence intervals for the location and the scale parameters and compare the bootstrap confidence intervals with the delete-d jackknife confidence intervals by length and coverage probability through Monte Carlo method.

• 품질경영학회지
• /
• 제19권1호
• /
• pp.51-64
• /
• 1991

This paper deals with a robust subset selection procedure based on Hodges-Lehmann estimators of location parameters. An improved formula for the estimated standard error of Hodges-Lehmann estimators is considered. Also, the degrees of freedom of the studentized Hodges-Lehmann estimators are investigated and it is suggested to use 0.8n instead of n-1. The proposed procedure is compared with the other subset selection procedures and it is shown to have good effciency for heavy-tailed distributions.