• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.6 no.3
• /
• pp.267-281
• /
• 1994

The Combustion gas behavior induced by fire in a building is numerically investigated. The typical building for this analysis is partially divided by a vertical baffle projecting from the ceiling. The solution procedure includes the low Reynolds number ${\kappa}-{\varepsilon}$ model for the turbulent flow and the discrete ordinates method is used for the calculation of radiative heat transfer equation. The effects of the location and size of fire source and baffle length on velocity and temperature distributions, species mass fraction and flame location are analyzed. As the results of this study, it is found that the case when the fire source is located at the vertical wall is more dangerous than at the bottom wall in view of the combustion products and flame location. It is also found that the radiation effect cannot be neglected in analyzing the building in fire.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.910-915
• /
• 2009

For large reciprocating compressors in parallel operation, an analytical study has been carried out on the gas pulsation in associated discharge piping lines. Since the pressure pulsation at a valve, valve dynamics, and the gas flow rate through the valve are interrelated, affecting one another, these need to be solved simultaneously. Acoustic transfer matrix method, which relates acoustic pressure and velocity at one location to those at another location, has been adopted to calculate the effect of the gas flow at one valve location on the gas pulsation at other valve locations.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.2
• /
• pp.107-116
• /
• 2016

Density of Phase-Change Memory (PCM) devices has been doubled through the employment of multi-level cell (MLC) technology. However, this doubled-capacity comes in the expense of severe performance degradation, as compared to the conventional single-level cell (SLC) PCM. This negative effect on the performance of the MLC PCM detracts from the potential benefits of the MLC PCM. This paper introduces an efficient way of minimizing the performance degradation while maximizing the capacity benefits of the MLC PCM. To this end, we propose a location-aware hybrid management of SLC and MLC in compressed PCM main memory systems. Our trace-driven simulations using real application workloads demonstrate that the proposed technique enhances the performance and energy consumption by 45.1% and 46.5%, respectively, on the average, over the conventional technique that only uses a MLC PCM.

• Journal of Information Technology Services
• /
• v.6 no.3
• /
• pp.225-239
• /
• 2007

Mobile service is highly becoming in the limelight on information society by offering infringement problem about individual privacy or information by political and scientific interest This study is focusing on primary LBS application Mobile service that emphasize position confirmation, especially, looking for friends. The aim at this study grasps user productivity factor of LBS application Mobile service, and analyses whether some have relations with value and action determination of LBS application Mobile service. According to result, Mobile service applying position service is supported with usefulness and system quality, adaptedness. On the other hand, Usability and social effect, privacy weren't embossed by leading person. Mobile service applying position service is changed with a person who have experience looking for friend. This study has systematically analysed about LBS application service by leading person

• International Journal of High-Rise Buildings
• /
• v.6 no.1
• /
• pp.91-99
• /
• 2017

Special consideration should be given to differential column shortening during the design and construction of a tall building to mitigate the adverse effects caused by such shortening. The effects of the outrigger - which is conventionally used to increase the lateral stiffness of a tall building - on the differential shortening are investigated in this study. Three analysis models, a constant-section, constant-stress, and general model, are prepared, and the differential shortenings of these models with and without the outrigger are compared. The effects of connection time, sectional area, and location of the outrigger on the differential shortening are studied. The sectional area of the outrigger shows a non-linear relation in reducing the maximum differential shortening. The optimum locations of the single and dual outriggers are investigated by an exhaustive search method, and it is confirmed that a global optimum location exists. This study shows that the outrigger can be utilized to reduce the differential shortening between the interior core wall and the perimeter columns as well as to reduce the lateral displacements due to wind or earthquake loads.

• Phonetics and Speech Sciences
• /
• v.6 no.2
• /
• pp.153-161
• /
• 2014

The current study reports the results from a cross-modal naming experiment investigating the effects of a prosodic boundary location on the comprehension of ambiguous dative NPs in Korean (Yeongmi-ka Ceonghi-eykey norae-rul pwulecwu-n pwuin-ul ${\cdots}$). The underlined dative NP, Ceonghi-eykey, can temporarily be attached to the embedded rel-marked verb, pwulecwu-n ('sing-rel') or to the matrix verb to appear later. Participants heard sentence fragments manipulated for the location of Intonation Phrase boundary (the biggest prosodic boundary in the model of Seoul Korean) and right after that, had to name visually presented naming targets, which resolve the ambiguity of dative NPs. The prosodic manipulation did not result in difference in naming time, suggesting that the location of a prosodic boundary failed to influence the way Korean listeners interpreted ambiguous dative NPs. Possible reasons for the null effect were discussed.

• Geomechanics and Engineering
• /
• v.8 no.2
• /
• pp.221-235
• /
• 2015

A series of laboratory model tests were conducted to investigate the effects of buried pipes location on the bearing capacity of strip footing in cohesionless soil. The variables examined in the testing program include relative density of the sand, loading rate of tests, burial depths of pipe and horizontal distance of pipe to footing. The test results showed a significant increase in bearing capacities when embedment ratio of pipe and horizontal distance of pipe to footing were increased. Based on the test results, it can be concluded that the location of pipes and relative density of sand are main parameters that affect the bearing capacity of strip footing. However, loading rate has not considerable effect on bearing capacity.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.2
• /
• pp.97-103
• /
• 2010

For large reciprocating compressors in parallel operation, an analytical study has been carried out on the gas pulsation in associated discharge piping lines. Since the pressure pulsation at a valve, valve dynamics, and the gas flow rate through the valve are interrelated, affecting one another, these need to be solved simultaneously. Acoustic transfer matrix method, which relates acoustic pressure and velocity at one location to those at another location, has been adopted to calculate the effect of the gas flow at one valve location on the gas pulsation at other valve locations.

• Journal of Industrial Technology
• /
• v.9
• /
• pp.67-77
• /
• 1989

This study is concerned with the accuracy, the pattern of error with which subjects can interpolate the location of a pointer or a target between two graduation markers with various size on CRT display. Stimuli were graphic images on CRT with a linear, end-marked, ungraduated scales having a target for t base-line sizes. The location of a target is estimated in units over the range 1-99. Smallest error of estimates was at the near ends and middle of the base-line. The median error was less 2 units, modal error was 1, and most error(;99.6%) was within 10. Subjects had a more tendency to overestimate than to underestimate at the left-part of base-line in all siges, and an opposite tendency at the right-part. A proper size to minimize the interpolation error exists such that size 500. It is suggested that interpolation of fifths and even tenths will give a reguired accuracy for certain situations, and relative location and base-line size has a relevant attribute to interpolate.

• Steel and Composite Structures
• /
• v.12 no.4
• /
• pp.275-289
• /
• 2012

In this paper the influence of stiffener location, rise/span ratio and fibre orientation on vibration behavior of corner supported hypar shells is studied by using a four-node hybrid stress finite element. The formulation of the element is based on Hellinger-Reissner variational principle. The element is developed by combining a hybrid plane stress element and a hybrid plate element. Benchmark problems are solved to validate the approach and free vibration response of stiffened orthotropic hypar shells is studied both with respect to fundamental frequency and mode shapes by varying the location of stiffeners, rise/span ratio and fiber orientation.