1 |
Balkaya, M., Moore, I. and Saglamer, A. (2013), "Study of non-uniform bedding support under continuous PVC water distribution pipes", Tunn. Undergr. Space Technol., 35, 99-108.
DOI
|
2 |
Bildik, S. (2013), "Investigation of buried pipe systems in different soil and loading conditions", Ph.D. Thesis, Institute of Natural and Applied Science, Cukurova University, Adana, Turkey.
|
3 |
Brachman, R.W.I. (1999), "Structural performance of Leachete collection pipes", Ph.D. Thesis, Department of Civil and Environmental Engineering, University of Western Ontario, London, ON, Canada.
|
4 |
Brachman, R.W.I. and Krushelnitzky, R.P. (2005), "Response of a landfill drainage pipe buried in a trench", Can. Geotech. J., 42(3), 752-762.
DOI
|
5 |
Burns, J.Q. and Richard, R.M. (1964), "Attenuation of stresses for buried cylinders", Proceedings of Soil Symposium on Soil-Structure Interaction, University of Arizona, Tucson, AZ, USA, pp. 379-392.
|
6 |
Cameron, D.A. (2005), "Analysis of buried flexible pipes in granular backfill subjected to construction traffic", Ph.D. Thesis, Graduate School of Engineering, University of Sydney, Sydney, Australia.
|
7 |
Cho, S. (2003), "Behaviour of Flexible Plastic Pipes with Flowable Backfill in Trench Conditions", Ph.D. Thesis, University of Houston, Houston , TX, USA.
|
8 |
Corey, R., Han, J., Khatri, D. and Parsons, R. (2014), "Laboratory study on geosynthtetic protection of guried steel-reinforcement HDPE pipes from static loading", J. Geotech. Geoenviron. Eng., 140(6), 04014019.
DOI
|
9 |
Hoeg, K. (1966), "Pressure distiribution on underground structural cylinders", Technical Report, No. AFWL TR 65-98, Kirtland Air Force Base, Albuquerque, NM, USA.
|
10 |
Hurd, J.O. (1986), "Field performance of corrugated polyethylene pipe culverts in Ohio", Serial of Transportation Research Record (TRR), Issue No. 1087, pp. 1.
|
11 |
Khatri, D.K., Han, J., Parsons, R.L., Young, B., Brennan, J.J. and Corey, R. (2013), "Laboratory evaluation of deformations of steel-reinforced high-density polyethylene pipes under static loads", J. Mater. Civil Eng., 25(12), 1964-1969.
DOI
|
12 |
Marston, A. and Anderson, A.O. (1913), Bulletin No. 31, Iowa Engineering Experiment Station, Ames, IA, USA.
|
13 |
Selig, E.T., DiFrancesco, L.C. and McGrath, T.J. (1993), "Laboratory tests of buried pipe in hoop Compression", Buried Plastic Pipe Technology, (ASTM STP 1222), PA, USA, pp. 119-132.
|
14 |
Spangler, M.G. and Shafer, G.E. (1941), "Structural design of flexible pipe culverts", Bulletin No 153, Iowa Engineering Experiment Station, Ames, IA, USA.
|
15 |
Sun, Z., Gong, X., Yu, J. and Zhang, J. (2013), "Analysis of the displacement of buried pipelines caused by adjacent surcharge loads", International Conference on Pipelines and Trenchless Technology, Xi'an, China, October.
|
16 |
Talesnick, M.L., Xia, H.W. and Moore, I.D. (2011), "Earth pressure measurements on buried HDPE pipe", Geotechnique, 61(9), 721-732.
DOI
|
17 |
Terzi, N.U. (2007), "Investigation of the effects of vertical and lateral loads on the stability of buried pipes", Ph.D. Thesis, Institute of Natural and Applied Science, Yildiz Technical University, Istanbul, Turkey.
|
18 |
ASTM D 4254-00 (2000), Standart Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density.
|
19 |
Adams, D.N., Muindi, T. and Selig E.T. (1989), "Polyethylene Pipe under High Fill", Transportation Research Record, No. 1231, pp. 88-95.
|
20 |
ASTM D 4253-00 (2000), Standart Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table.
|