• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.4
• /
• pp.9-21
• /
• 2018

In South Korea, Jeju Island has a role as a test bed for electric vehicles (EVs). All conventional cars on the island are supposed to be replaced with EVs by 2030. Accordingly, how to effectively set up EV charging stations (EVCSs) that can charge EVs is an urgent research issue. In this paper, we present a case study on planning the locations of EVCS for Jeju Island, South Korea. The objective is to determine where EVCSs to be installed so as to balance the load of EVCSs while satisfying demands. For a public service with EVCSs by some government or non-profit organization, load balancing between EVCS locations may be one of major measures to evaluate or publicize the associated service network. Nevertheless, this measure has not been receiving much attention in the related literature. Thus, we consider the measure as a constraint and an objective in a mixed integer programming model. The model also considers the maximum allowed distance that drivers would detour to recharge their EV instead of using the shortest path to their destination. To solve the problem effectively, we develop a heuristic algorithm. With the proposed heuristic algorithm, a variety of numerical analysis is conducted to identify effects of the maximum allowed detour distance and the tightness of budget for installing EVCSs. From the analysis, we discuss the effects and draw practical implications.

• Fire Science and Engineering
• /
• v.33 no.1
• /
• pp.85-91
• /
• 2019

This study evaluated the fire detection performance of an automatic fire extinguishing system for road tunnels, which combines flame wavelength detection technology with flame image detection technology. This fusion technique to improve the fire detection capability can reduce the damage caused by the fire suppression by locating the fire source in the fire and discharging the pressurized water only at the fire source. Experiments were conducted to determine the position of a fire source when a $70cm{\times}70cm$ target was placed at a distance of 15 m, 20 m, 25 m, 30 m, and 35 m, respectively, in a situation where there is a flame and smoke in a tunnel. The performance of the ultraviolet and triple wavelength infrared (IR3) sensors was attenuated due to the interference of thick smoke. In addition when the flame was blocked by thick smoke, the image sensor sensed the smoke and emitted a fire signal.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.5
• /
• pp.49-54
• /
• 2022

With the recent widespread adoption of general-purpose GPUs (GPGPUs) in cloud systems, maximizing the resource utilization through multitasking in GPGPU has become an important issue. In this article, we show that resource allocation based on the workload classification of computing-bound and memory-bound is not sufficient with respect to resource utilization, and present a new thread block scheduling policy for GPGPU that makes use of fine-grained resource utilizations of each workload. Unlike previous approaches, the proposed policy reduces scheduling overhead by separating profiling and scheduling, and maximizes resource utilizations by co-locating workloads with different bottleneck resources. Through simulations under various virtual machine scenarios, we show that the proposed policy improves the GPGPU throughput by 130.6% on average and up to 161.4%.

• Geomechanics and Engineering
• /
• v.29 no.2
• /
• pp.183-192
• /
• 2022

Piled raft foundations are widely used and effective in supporting high-rise buildings around the world. In this study, a piled raft system was numerically simulated using PLAXIS 3D. The settlement comparison results between the actual building measurements and the three-dimensional (3D) numerical analysis, were in good agreement, indicating the usefulness of this approach for the evaluation of the feasibility of using a piled raft foundation in Ho Chi Minh City subsoil. The effects were investigated of the number of piles based on pile spacing, pile length, raft embedment on the settlement, load sharing, bending moments, and the shear force of the piled raft foundation in Ho Chi Minh City subsoil. The results indicated that with an increased number of piles, increased pile length, and embedding raft depth, the total and differential settlement decreased. The optimal design consisted of pile numbers of 60-70, corresponding to pile spacings is 5.5-6 times the pile diameter (D_p), in conjunction with a pile length-to-pile diameter ratio of 30. Furthermore, load sharing by the raft, by locating it in the second layer of stiff clay, could achieve 66% of the building load. The proposed model of piled raft foundations could reduce the total foundation cost by 49.61% compared to the conventional design. This research can assist practicing engineers in selecting pile and raft parameters in the design of piled raft foundations to produce an economical design for high-rise buildings in Ho Chi Minh City, Viet Nam, and around the world.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.2
• /
• pp.61-68
• /
• 2023

Demand for "pet plants" and "planteriers" is increasing due to the increase in COVID-19 and fine dust. In this paper, Smart pots for planterior should be small in size while providing the functions for cultivation without any problems. They should provide a user interface for long-range control for user's convenience. We implemented smart pots by incorporating IoT into pots. In response to the growing number of iPhone users, we developed an iOS app for user interface and UX/UI design. By communicating with the smartphone app and a home pot server over the Internet, users can check and control the state of the pot anytime, anywhere. The server and the pot module were separated to reduce the size of the pot itself. By locating a water bottle at the bottom of the pot, we expect that it is suitable for a "planterier" because it adopts a circulating structure in which drainage flows down to the water bottle as it is.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.2
• /
• pp.71-79
• /
• 2008

High voltage distribution lines in the electric railway system placed according track with communication lines and signal equipments. Case of the over head lines is occurrence the many fault because lightning, rainstorm, damage from the sea wind and so on. According this fault caused protection device to wrong operation. One line ground fault that occurs most frequently in railway high voltage distribution lines and sort of faults is line short, three line ground breaking of a wire, and so on. For this reason we need precise maintenance for prevent of the faults. The most important is early detection and fast restoration in time of fault for a safety transit. In order to develop an advanced fault location device for 22.9[kV] distribution power network in electric railway system this paper deals with new fault locating algorithm using flow technique which enable to determine the location of the fault accurately. To demonstrate its superiorities, the case studies with the algorithm and the fault analysis using PSCAD/EMTDC (Power System Computer Aided Design/Electro Magnetic Transients DC Analysis Program) were carried out with the models of direct-grounded 22.9[kV] distribution network which is supposed to be the grounding method for electric railway system in Korea.

• Journal of Internet of Things and Convergence
• /
• v.8 no.5
• /
• pp.119-125
• /
• 2022

With the recent increase in dementia patients due to aging, measures to prevent their wandering behavior and disappearance are urgently needed. To solve this problem, various authentication methods and location detection techniques have been introduced, but the security problem of personal authentication and a system that can check indoor and outdoor overall was lacking. In order to solve this problem, various authentication methods and location detection techniques have been introduced, but it was difficult to find a system that can check the security problem of personal authentication and indoor/outdoor overall. In this study, we intend to propose a system that can identify personal authentication, basic health status, and overall location indoors and outdoors by using wristband-type wearable devices in a private blockchain environment. In this system, personal authentication uses ECG, which is difficult to forge and highly personally identifiable, Bluetooth beacon that is easy to use with low power, non-contact and automatic transmission and reception indoors, and DGPS that corrects the pseudorange error of GPS satellites outdoors. It is intended to detect wandering behavior and abnormal signs by locating the patient. Through this, it is intended to contribute to the prompt response and prevention of disappearance in case of wandering behavior and abnormal symptoms of dementia patients living at home or in nursing homes.

• The Korean Journal of Zoology
• /
• v.12 no.1
• /
• pp.22-28
• /
• 1969

In order to see if any suppressor system for the SD action was involved in natural populations of D. melanogaster samples from the populations of nine localities in Korea, Choonchun, Yusoo, Namhai, Shinchon(Seoul), Kwangjoo(Kyunggi), Koonsan, Kwangjoo(Chunnam), Jejoo and Pusan were analyzed by using the mating scheme for locating the suppressor on chromosome pairs. And also two kinds of recombinant SD lines R-1, the American line and $R(SD^NH -1)-1$, the Japanese one were used in order to see any difference of the response of the suppressor for differently originated SD. The results of the experiment are given below. (1) The suppressor system was involved in all lines of natural populations from nine localities of Korea. (2) Most of the suppressors were found to be located on the X chromosome and only a few lines from three populations showed to carry the suppressors on the second chromosome and on the third or fourth chromosoem. (3) The response of the suppressor for differently originated SD lines showed no significant difference.

• Imaging Science in Dentistry
• /
• v.45 no.1
• /
• pp.15-22
• /
• 2015

Purpose: This study was performed to assess the reproducibility of identifying the sella turcica landmark in a three-dimensional (3D) model by using a new sella-specific landmark reference system. Materials and Methods: Thirty-two cone-beam computed tomographic scans (3D Accuitomo$^{(R)}$ 170, J. Morita, Kyoto, Japan) were retrospectively collected. The 3D data were exported into the Digital Imaging and Communications in Medicine standard and then imported into the Maxilim$^{(R)}$ software (Medicim NV, Sint-Niklaas, Belgium) to create 3D surface models. Five observers identified four osseous landmarks in order to create the reference frame and then identified two sella landmarks. The x, y, and z coordinates of each landmark were exported. The observations were repeated after four weeks. Statistical analysis was performed using the multiple paired t-test with Bonferroni correction (intraobserver precision: p<0.005, interobserver precision: p<0.0011). Results: The intraobserver mean precision of all landmarks was <1 mm. Significant differences were found when comparing the intraobserver precision of each observer (p<0.005). For the sella landmarks, the intraobserver mean precision ranged from $0.43{\pm}0.34mm$ to $0.51{\pm}0.46mm$. The intraobserver reproducibility was generally good. The overall interobserver mean precision was <1 mm. Significant differences between each pair of observers for all anatomical landmarks were found (p<0.0011). The interobserver reproducibility of sella landmarks was good, with >50% precision in locating the landmark within 1 mm. Conclusion: A newly developed reference system offers high precision and reproducibility for sella turcica identification in a 3D model without being based on two-dimensional images derived from 3D data.

• Journal of Intelligence and Information Systems
• /
• v.12 no.2
• /
• pp.125-144
• /
• 2006

The development of mobile applications is fast in recent years. However, nearly all applications are for messaging, financial, locating services based on simple interactions with mobile users because of the limited screen size, narrow network bandwidth, and low computing power. Processing an algorithm for supporting a group decision process on mobile devices becomes impossible. In this paper, we introduce the mobile-oriented simple interactive procedure for support a group decision making process. The interactive procedure is developed for multiple objective linear programming problems to help the group select a compromising solution in the mobile Internet environment. Our procedure lessens the burden of group decision makers, which is one of necessary conditions of the mobile environment. Only the partial weak order preferences of variables and objectives from group decision makers are enough for searching the best compromising solution. The methodology is designed to avoid any assumption about the shape or existence of the decision makers' utility function. For the purpose of the experimental study of the procedure, we developed a group decision support system in the mobile Internet environment, MOBIGSS and applied to an allocation problem of investor assets.